(Showing 12 of 1981)
Show 12 24 36 48 96

Categories

EMC Test Equipment
EMC Test Equipment
EMI Test Setup
EMI Test Setup
EMC Standards
EMC Standards
Application/Test Type
Application/Test Type
Shielded Enclosures
Shielded Enclosures
RF Test Equipment
RF Test Equipment
Electronic Test Equipment
Electronic Test Equipment
Antenna Pattern Measurement Equipment
Antenna Pattern Measurement Equipment
Anechoic Chamber Materials
Anechoic Chamber Materials
Software for EMC Testing
Software for EMC Testing
Top Manufacturers
Top Manufacturers
Clearance
Clearance
EMC Test Systems

Test Equipment, Systems & Solutions

  • AH Systems FCC-1 Tuned Dipole Antenna, 25 MHz – 70 MHz, 300 Watts

    AH Systems FCC-1 Tuned Dipole Antenna, 25 MHz – 70 MHz, 300 Watts

    SKU: sku-743

    Weight: 1.2 lbs
    Antennas: Dipole Antennas
    Application/Test Type: site attenuation measurements
    Connector: N-type (female)
    Dimensions: Length 23.7 in.
    Frequency Range: 25 MHz to 70 MHz
    Gain: -5 to 2 dBi
    Impedance: 50 Ohms nominal
    Maximum Continuous Power: 300 Watts
    Mounting Base: One balun mounting clamp with 1/4-20 threads
    View Product Cart
  • A.R. 3500A100 RF Amplifier for RS103 Testing up to 100 MHz

    A.R. 3500A100 High Power RF Amplifier

    SKU: sku-741

    Weight: 900 lbs.
    Dimensions: 22.1 x 60.0 x 39.4 in
    Flatness: ± 1.5 dB maximum ± 0.5 dB with internal leveling
    Frequency Range: 10 kHz - 100 MHz instantaneously
    Gain: 66 dB minimum
    Impedance: 50 ohms
    Input: 180-267 VAC Delta (4 wire) 360-435 VAC, Wye (5 wire) (user must specify) 47-63Hz, 3 phase 15,000 watts maximum at .99 P.F. typical
    Output: POWER OUTPUT @ 3 dB COMPRESSION Typical.... 3000 watts Minimum .. 2700 watts POWER OUTPUT @ 1 dB COMPRESSION Typical...... 2500 watts Minimum ... 2000 watts
    RF Connector: Type N female
    RF Input Voltage: 1.0 milliwatt maximum for rated output
    Inquire for Lead time
    View Product Cart
  • Amplifier Research 100S1G4M1 Solid-state Amplifier, 100 Watts CW, 0.8-4.2 GHz

    Amplifier Research 100S1G4M1 Solid-state Amplifier, 100 Watts CW, 0.8-4.2 GHz

    SKU: sku-739

    Weight: 190 lbs.
    Dimensions: 19.8 x 18.5 x 24.0in
    Flatness: FLATNESS............... ±1.5 dB typical ........................ ±2.0 dB maximum .......... ± 1dB with Internal Leveling
    Frequency Range: 0.8 – 4.2 GHz
    Gain: GAIN (at maximum setting)... 50 dB minimum GAIN ADJUSTMENT ........ (Continuous Range) .....15 dB minimum . (4096 steps remote)
    Impedance: 50 ohms
    Input: 99-260 VAC
    Output: POWER OUTPUT @ 3dB COMPRESSSION Nominal....... 120 watts Minimum ........... 90 watts POWER OUTPUT @ 1dB COMPRESSION Nominal............. 100 watts Minimum ...... 70 watts
    RF Connector: Type N female
    RF Input Voltage: 1.0 milliwatt maximum for rated output
    View Product Cart
  • Fischer Custom Communications FCC-801-M3-16A, 3 Line M Series CDN, 150 kHz – 230MHz, 16 Amp

    Fischer Custom Communications FCC-801-M3-16A, 3 Line M Series CDN, 150 kHz – 230MHz, 16 Amp

    SKU: sku-731

    Application/Test Type: 3 Power Conductors
    Common Mode Impedance: Frequency dependent 150 kHz – 26MHz: 150Ω ±20Ω 26MHz – 80MHz: 150Ω +60Ω -45Ω 80MHz –230MHz: 150Ω +60Ω -60Ω
    Current Rating: 16 Amps
    Frequency Range: 150 kHz to 230 MHz
    Mains & EUT Connections: Multi-Contact Safety Socket
    RF Connector: 50 Ω BNC (Female)
    RF Input Voltage: 30 Volts
    Standards Met: IEC / EN 61000-4-6
    Voltage Division Factor: 10dB+1dB/-3dB
    Voltage Rating: DC less than 600V, AC less than 250V
    View Product Cart
  • Fischer Custom Communications FCC-801-C1-BNC-50, C Series CDN for RF Coaxial Cables

    Fischer Custom Communications FCC-801-C1-BNC-50, C Series CDN for RF Coaxial Cables

    SKU: sku-729

    Application/Test Type: 1 Conductor
    Common Mode Impedance: Frequency dependent 150 kHz – 26MHz: 150Ω+20Ω 26MHz – 80MHz: 150Ω+60Ω-45Ω 80MHz –230MHz: 150Ω +60Ω -60Ω
    Current Rating: 1 Amps
    Frequency Range: 150 kHz to 230 MHz
    Mains & EUT Connections: BNC 50Ω
    RF Connector: 50 Ω BNC (Female)
    RF Input Voltage: 30 Volts
    Standards Met: IEC / EN 61000-4-6
    Voltage Division Factor: 10dB+1dB
    Voltage Rating: DC less than 600V, AC less than 350V
    View Product Cart
  • Fischer Custom Communications FCC-801-AF3, 3-Line, CDN for IEC 61000-4-6 Conducted Immunity

    Fischer Custom Communications FCC-801-AF3, 3-Line, CDN for IEC 61000-4-6 Conducted Immunity

    SKU: sku-728

    Application/Test Type: 3 Audio Signal Line Conductors
    Common Mode Impedance: Frequency dependent 150 kHz – 26MHz: 150Ω+20Ω 26MHz – 80MHz: 150Ω+60Ω-45Ω 80MHz –230MHz: 150Ω +60Ω -60Ω
    Current Rating: 2 Amps
    Frequency Range: 150 kHz to 230 MHz
    Mains & EUT Connections: Multi-Contact Safety Socket
    RF Connector: 50 Ω BNC (Female)
    RF Input Voltage: 30 Volts
    Standards Met: IEC / EN 61000-4-6
    Voltage Division Factor: 10dB+1dB/-3dB
    Voltage Rating: DC less than 600V, AC less than 350V
    View Product Cart
  • Rohde & Schwarz (R&S) NRP-Z55 Thermal Power Sensor

    Rohde & Schwarz (R&S) NRP-Z55 Thermal Power Sensor

    SKU: sku-714

    RF Field Probe Connector: 2.92 mm connector
    RF Field Probe Frequency Range: DC to 44 GHz
    RF Field Probe Maximum Input Power: 10 W (PK, 1 µs)
    RF Field Probe Measurement Accuracy: Measurement range: –35 dBm to +20 dBm
    Supply Voltage: Operation with R&S®NRP2 base unit or via USB on a Laptop/PC
    $295.00
    Ordering Options

Connect with The EMC Shop

Our experienced staff can help you with applications, purchase and rental options.

Contact Form