Categories
Test Equipment, Systems & Solutions
-
EFT-DLC EFT/Burst Capacitive Coupling Clamp for Data Lines
SKU: 1780
Application/Test Type: Electrical Fast Transients on Data Lines (EFT Burst)Built in Accordance to: IEC 61000-4-4Coupling Length: 1 m (39.4 in)Compatible Impulse Generators: Any EFT/Burst Generators (custom HV cable may be required)RF Connector: Fischer HV ConnectorVoltage Rating: up to 5.0 kV$195.00In Stock -
Rent EM Test TSS 500M2F Telecom Surge Simulator for FCC Part 68
SKU: sku-776
Weight: approx. 35kgApplication/Test Type: Test levels as per FCC part 68Coupling: Telecom ports: Tip to Ground, Ring to Ground, Tip and Ring to Ground Power ports 250V/16A: L toN, L to PE, N to PE , L+N to PEDimensions: 19“ / 6HU,Output Current: 64A – 1,000A (power line) 20 – 200A per wire (surge A)Outputs: 4 mm banana socketPolarity: pos / neg / alternateRise time: Less than 2 usTelecom Surge: As per FCC part 68, Pulse B, IEC 61000-4-5, ITU and ETSI recommendationsTest Voltage: 160V – 2,500V ± 10% (power line) 160V – 1,500V ± 10% (surge A)Trigger of bursts: Automatic pulse release -
A.R. 500A100A Solid State RF Amplifier, 500 Watts CW, 10 kHz - 100 MHz
SKU: sku-775
Weight: 150 lbsDimensions: 19.8 x 16.8 x 21.7 inFlatness: .± 1.5 dB maximum ± 0.5 dB with internal levelingFrequency Range: 10 kHz - 100 MHzGain: GAIN (at maximum setting).........57 dB minimum GAIN ADJUSTMENT (continuous range)....25 dB minimumImpedance: 50 ohmsInput: 180 - 264 VAC 47 - 440 Hz, 2000 watts maximum @ 0.99 P.F. typicalOutput: POWER OUTPUT, CW Nominal .... 617 watts Minimum...... 500 watts Linear @ 1 dB compression .. 300 watts minimumRF Connector: Type N femaleRF Input Voltage: 1.0 milliwatt maximum for rated outputInquire for Availability -
Keysight / Agilent E9304A RF Power Sensor, 9 kHz - 6 GHz
SKU: 6577
Frequency Range: 9 kHz to 6 GHzApplication: Radiated ImmunitySensitivity: -60 to +20 dBmConnector: Type-NIn Stock -
Motorola SH-120 RF Shielded Test Enclosure Shield Box EMI Chamber
SKU: sku-771
Dimensions: 420mm L x 260mm W x 280mm H -
Rohde & Schwarz SMF100A Microwave Signal Generator
SKU: sku-770
Warranty: 120 DaysFrequency Range: 1 GHz to 22 GHzResolution: 0.001 HzRF Connector: R&S®SMF-B81Trigger: auto, external trigger, external gateIn Stock -
Keysight (Agilent/HP) E8247C-520 PSG Signal Generator, 250 kHz to 20 GHz
SKU: sku-769
Weight: 48 lbs.Dimensions: 7” H x 16.8” W x 19.6” DFrequency Range: 250 kHz to 20 GHzResolution: 0.001 HzRF Connector: BNC femaleSwitching time: less than 12 msTrigger: Auto, external, single, or GPIB$26,500.00 -
-
CE Mark Product Package for IEC/EN 61000-4 Series Compliance
SKU: TES-CE-Mark-RI-CI
Applications: CE Marking, EMC Precompliance Testing, Conducted ImmunityHarmonized Standards: IEC/EN 61000-4-4, IEC 61000-4-5, IEC 61000-4-11Industries: Medical DevicesTest Setup: Conducted Immunity/Susceptibility Test SetupPeak inrush current capability: greater than 500 AmpsPre-Programmed IEC Levels: YesIN STOCK -
EM Test CSS 500N10 Current Surge Generator, 8/20us Up To 10ka
SKU: 30061
Weight: approx. 66 lbs.Coupling: N/ADimensions: 19"/6HU,Polarity: positive / negative / alternatePulse current (short circuit): 0.4kA to 10kA +/-10%Pulse voltage (open circuit): 250V to 6,000V +/-10%, Step width 50VRepetition time: Max. 10 pulses per minute, depending on the charging voltageInquire for Availability -
AH Systems FCC-4 High Frequency Tuned Dipole Antenna, 325 MHz to 1000 MHz, CISPR 16-1-5, 60 Watts
SKU: sku-746
Weight: 0.4 lbsAntennas: Dipole AntennasApplication/Test Type: site attenuation measurementsConnector: N-type (female)Dimensions: Length 9 in.Frequency Range: 325 MHz - 1000 MHzGain: 0 to 2 dBiImpedance: 50 Ohms nominalMaximum Continuous Power: 60 WattsMounting Base: One balun mounting clamp with 1/4-20 threads -
AH Systems FCC-3 Tuned Dipole Antenna, 170 MHz to 340 MHz, 90 Watts
SKU: sku-745
Weight: 0.5 lbsAntennas: Dipole AntennasApplication/Test Type: site attenuation measurementsConnector: N-type (female)Dimensions: Length 12.5 in.Frequency Range: 170 MHz - 340 MHzGain: 1 to 2 dBiImpedance: 50 Ohms nominalMaximum Continuous Power: 90 WattsMounting Base: One balun mounting clamp with 1/4-20 threads