(Showing 12 of 1977)
Show 12 24 36 48 96

Categories

EMC Test Equipment
EMC Test Equipment
Test Applications
Test Applications
Standards
Standards
Manufacturers
Manufacturers
Shielded Enclosures
Shielded Enclosures
RF Test Equipment
RF Test Equipment
Electronic Test Equipment
Electronic Test Equipment
Antenna Pattern Measurement Equipment
Antenna Pattern Measurement Equipment
Clearance
Clearance
Resources

Test Equipment, Systems & Solutions

  • Monthly Rental EM Test CWS 500N Continuous Wave Simulator for IEC 61000-4-6

    Monthly Rental EM Test CWS 500N Continuous Wave Simulator for IEC 61000-4-6

    SKU: sku-921

    Weight: 17 kg (37.5 Pounds)
    Application/Test Type: Create and output RF currents as well as measure input for CDN and clamp calibration as well as current monitor for clamp applications
    Dimensions: 19"/3 HU
    Frequency Range: Sinus (CW) 100kHz to 300MHz Frequency bands 100kHz to 9.999MHz 10MHz to 99.99MHz 100MHz to 300MHz
    Impedance: 50 Ohms
    Input: 115 V to 230 V +10/-15 %, 50/60 Hz (380 Watts Max)
    Maximum Continuous Power: 80W (nominal)
    Standards Met: IEC 61000-4-6
    Test Routines: Quick Start, User Test Routines, Standards Test Routines (IEC/EN 61000-4-6), Cal Procedure, Service
    Voltage Rating: 1 V to 30 Volts Max
    VIEW PRODUCT Cart
  • Boonton 51075 500kHz-18GHz CW Power Sensor

    Boonton 51075 500kHz-18GHz CW Power Sensor

    SKU: sku-918

    Frequency range: -70 to +20 dBm
    Weight: 0.3kg
    Connector: N Type - Male
    Dynamic Range: -70 to +20 dBm
    Frequency Range: 500kHz to 18GHz
    Input: 50 Ohms
    Overload: Pulse/cont. 1 W for 1µs, 300 mW
    $975.00
  • Amplifier Research FP7018 3 MHz –18 GHz, 1000 V/m Electric Field Probe

    Amplifier Research FP7018 3 MHz –18 GHz, 1000 V/m Electric Field Probe

    SKU: sku-914

    Dimensions: 420 x 85 x 65 mm including base and probe head.
    Weight: 350g Approximately
    Battery: Standard recharger included, 3 hour charge time.
    Damage Level: 1600 V/m CW and 16,000 V/m peak
    Data Transfer Rate: 30 samples per second
    Dimensions-2: 420 x 85 x 65 mm
    Operating Temperature: 0 to 50°C
    Power Requirements: 2 built-in NiMH batteries, size AA, Rechargeable, changed by operator, 40 hours operating life per charge.
    Probe Head Diameter: 65mm
    Probe Sampling Rate: 60Hz, 50Hz, 5 Hz- user selectable
    Ranges: Single continuous range
    Sensitivity: 0.6–1000 V/m
    VIEW PRODUCT Cart
  • Com-Power LI-3P-232 Three Phase LISN for CISPR / ANSI

    Com-Power LI-3P-232 Three Phase LISN for CISPR / ANSI

    SKU: sku-893

    Weight: 27.5 lbs.
    Application/Test Type: Power Line Conducted Emissions Tests
    Current rating: 32 Amperes
    Dimensions: 19.3” x 13.9” x 2.3″
    Frequency Range: 9 kHz – 30 MHz
    Inductors: 50 µH
    Insertion loss: less than 0.7 dB
    Isolation: more than 40 dB
    Mains & EUT Connections: Remote Interface Power Input Port 5.5/2.5 mm Power Jack
    RF Connector: RF Measurement Port 50Ω – N-Type (female)
    Standards Met: ANSI C63.4, CISPR 16-1-2
    VIEW PRODUCT Cart
  • Com-Power LI-150C Line Impedance Stabilization Network

    Com-Power LI-150C Line Impedance Stabilization Network

    SKU: sku-890

    Weight: 25 lbs. / 11.3 kg
    Application/Test Type: Power line conducted emissions tests
    Current Rating: 50 Amps (AC), 35 Amps (DC)
    Dimensions: 13 x 7 x 7 inches / 33 x 17.7 x 17.7 cm
    Frequency Range: 150 kHz to 30 MHz
    Inductors: 5 µH (air-core)
    Insertion Loss: 0.5 dB (150 kHz to 30 MHz)
    Isolation: 40 dB (150 kHz to 30 MHz)
    Mains & EUT Connections: Superior Electric SUPERCON® shrouded sockets
    RF Connector: 50Ω N-type (female)
    Standards Met: CISPR 16-1-2 / ANSI C63.4
    Voltage Rating: 270 VAC (Line to Ground), 380 VDC
    VIEW PRODUCT Cart
  • Com-Power LIN-120C Line Impedance Stabilization Network

    Com-Power LIN-120C Line Impedance Stabilization Network

    SKU: sku-889

    Weight: 10 lbs (4.5 kg)
    Application/Test Type: Power line conducted emissions tests
    Current Rating: 20 Amps AC (rms) , 14 Amps DC
    Dimensions: 6.6” x 14.3” x 13” (16.8 x 36.3 x 33 cm)
    Frequency Range: 150 kHz to 30 MHz
    Inductors: 50 µH (air-core)
    Insertion Loss: 0.5 dB (150 kHz to 30 MHz)
    Isolation: 40 dB (150 kHz to 30 MHz)
    Mains & EUT Connections: IEC 60320 @Mains and NEMA 5-15R @EUT
    RF Connector: 50Ω N-type (female)
    Standards Met: CISPR 16-1-2, ANSI C63.4
    Voltage Rating: 270 VAC (Line to Ground), 380 VDC
    VIEW PRODUCT Cart