(Showing 12 of 1974)
Show 12 24 36 48 96

Categories

EMC Test Equipment
EMC Test Equipment
Test Applications
Test Applications
Standards
Standards
Manufacturers
Manufacturers
Shielded Enclosures
Shielded Enclosures
RF Test Equipment
RF Test Equipment
Electronic Test Equipment
Electronic Test Equipment
Antenna Pattern Measurement Equipment
Antenna Pattern Measurement Equipment
Clearance
Clearance
Resources

Test Equipment, Systems & Solutions

  • Amplifier Research FL7030 5 kHz - 30 MHz Electric Field Laser Powered Probe

    Amplifier Research FL7030 5 kHz - 30 MHz Electric Field Laser Powered Probe

    SKU: 11934

    Weight: 62.5 g (2.2 oz)
    Accuracy: ±1.0dB @ 10MHz1 0.8dB, 100kHz–1GHz3,4 1.4dB, 1GHz–6GHz3,4
    Analog Response Time: 20 msec/up to 50 samples per second, at FI7000 USB and GPIB interfaces
    Calibration Data: Accredited Calibration Report (A2LA) supplied with probe
    Damage Level: 1000 V/m continuous field
    Data Returned From Probe: X, Y, Z axes, and Composite
    Dimensions: 5.7 x 5.7 x 5.7 cm (2.25 x 2.25 x 2.25 in) 2.92 cm (1.15 in) DIA spherical housing 3.18 cm (1.25 in) sensor radome per axes
    Fiber Optic Connectors: Two E2000 compact duplex connectors at 1 meter, includes fiber optic verification loop.
    Isotropic Deviation: ± 0.5 dB @ 10 MHz ± 0.5 dB, 5 kHz–30 MHz (typical)
    Linearity: ± 0.5 dB and ± 0.9 V/m
    Operating Range: 1.5–300 V/m
    Operating Temperature: 10˚C to 40˚C (50˚F to 104˚F) @ 5% to 95% RH non-condensing
    Power Requirements: Laser powered from FI7000 interface
    Rise time: Typical Analog 300nS
    Temperature Stability: ± 0.5 dB over operating temperature range
    VIEW PRODUCT Cart
  • Amplifier Research FA7006 6 GHz E-Field Probe

    Amplifier Research FA7006 6 GHz E-Field Probe Kit

    SKU: 11933

    Test Standards: IEC 61000-4-3
    Accuracy: ±1.0dB @ 10MHz1 0.8dB, 100kHz–1GHz3,4 1.4dB, 1GHz–6GHz3,4
    Damage Level: 1000 V/m
    Dimensions: 5.7 x 5.7 x 5.7cm
    Linearity: ±0.5dB
    Minimum Pulse Width: 2μs
    Operating Range: 9 – 900V/m
    Rise time: Typical Analog 300nS
    Temperature Stability: ±1.0dB, 10°C - 40°C8
    Typically In Stock
    VIEW PRODUCT Cart
  • Amplifier Research CL-105/CL-106 Shielded Enclosure Leak Detector System

    Amplifier Research CL-105/CL-106 Shielded Enclosure Leak Detector System

    Weight: 26 lb
    Frequency Range: 95 kHz (Crystal Controlled)
    Output Signal: Pulse modulated at approximately 600 Hz and has a 50% duty cycle
    Receiver: Two meter scales for high and low operation Aural output for headphone operation Battery operated for portable use Dynamic range of 120dB
    Transmitter Output: 1 Ampere RMS into an inductive load from approximately 5–50 μHy
    VIEW PRODUCT Cart
  • Monthly Rental EM Test CWS 500N Continuous Wave Simulator for IEC 61000-4-6

    Monthly Rental EM Test CWS 500N Continuous Wave Simulator for IEC 61000-4-6

    SKU: sku-921

    Weight: 17 kg (37.5 Pounds)
    Application/Test Type: Create and output RF currents as well as measure input for CDN and clamp calibration as well as current monitor for clamp applications
    Dimensions: 19"/3 HU
    Frequency Range: Sinus (CW) 100kHz to 300MHz Frequency bands 100kHz to 9.999MHz 10MHz to 99.99MHz 100MHz to 300MHz
    Impedance: 50 Ohms
    Input: 115 V to 230 V +10/-15 %, 50/60 Hz (380 Watts Max)
    Maximum Continuous Power: 80W (nominal)
    Standards Met: IEC 61000-4-6
    Test Routines: Quick Start, User Test Routines, Standards Test Routines (IEC/EN 61000-4-6), Cal Procedure, Service
    Voltage Rating: 1 V to 30 Volts Max
    VIEW PRODUCT Cart
  • Boonton 51075 500kHz-18GHz CW Power Sensor

    Boonton 51075 500kHz-18GHz CW Power Sensor

    SKU: sku-918

    Frequency range: -70 to +20 dBm
    Weight: 0.3kg
    Connector: N Type - Male
    Dynamic Range: -70 to +20 dBm
    Frequency Range: 500kHz to 18GHz
    Input: 50 Ohms
    Overload: Pulse/cont. 1 W for 1µs, 300 mW
    $975.00
  • Amplifier Research FP7018 3 MHz –18 GHz, 1000 V/m Electric Field Probe

    Amplifier Research FP7018 3 MHz –18 GHz, 1000 V/m Electric Field Probe

    SKU: sku-914

    Dimensions: 420 x 85 x 65 mm including base and probe head.
    Weight: 350g Approximately
    Battery: Standard recharger included, 3 hour charge time.
    Damage Level: 1600 V/m CW and 16,000 V/m peak
    Data Transfer Rate: 30 samples per second
    Dimensions-2: 420 x 85 x 65 mm
    Operating Temperature: 0 to 50°C
    Power Requirements: 2 built-in NiMH batteries, size AA, Rechargeable, changed by operator, 40 hours operating life per charge.
    Probe Head Diameter: 65mm
    Probe Sampling Rate: 60Hz, 50Hz, 5 Hz- user selectable
    Ranges: Single continuous range
    Sensitivity: 0.6–1000 V/m
    VIEW PRODUCT Cart