Categories
Test Equipment
-
Frankonia CIT-10 RF Conducted Immunity Test System
SKU: 6886
Test Capabilities: RF Conducted ImmunityCDN Test Levels (w/ built-in amplifier): 30VrmsBCI Test Levels (w/ built-in amplifier): 200mAStandards Met: IEC/EN 61000-4-6, MIL-461 CS114, ISO 11452-4Applications: Bulk Current Injection Testing, RF Conducted Immunity$16,500.00In Stock -
AH Systems AK-18G Antenna Kit for FCC, MIL-STD, VDE and TEMPEST Testing up to 18 GHz
SKU: 7149
Applications: Radiated Immunity, Radiated EmissionsStandards Met: FCC, MIL-STD-461, VDE, TEMPEST TestingAntenna Case Dimensions: 28" x 23" x 10"Tripod Case Dimensions: 46" x 8" DiameterInquire for Availability -
Fischer FCC F-120-9 Bulk Current Injection Probe
SKU: 3729
Frequency Range: 10 kHz – 230 MHzInput Power Rating: 100 WattsInner Diameter: 40 mmOuter Diameter: 127 mmBCI Test Standards: ISO 11452-4, IEC 61000-4-6 BCI, DO-160 Section 20, MIL-STD-461 CS114$295.00In Stock -
EMC Partner CDN-KIT1000 ED3
SKU: 35425
Standard: IEC 61000-4-5Application: surge on 2 unsymmetrical linesTest level surge: max. 6 kVEUT voltage per line: max. 200 V DC or 240 V peakEUT current per line: max. 4 A cont. or 5 A for 5 min.Typically In Stock -
Com-Power LI-350 Line Impedance Stabilization Network
SKU: 10425
Weight: 6 lbs. / 2.7 kgApplication/Test Type: Power line conducted emissions testsCurrent Rating: 50 Ampere AC, 35 Ampere DCDimensions: 15.4 x 7 x 6.6 inches / 39.1 x 17.7 x 16.7 cmFrequency Range: 10 kHz to 400 MHzInquire for Availability -
Teseq INA-5511-VK Automotive Transient Verification Kit
SKU: 11838
Standards Met: ISO 7637-2, ISO 16750-2Compatible Generator: Teseq NSG 5500, 3ctest TIS 700, EM Test UCS200NInquire for Availability -
Schwarzbeck VULB 9161 SE TRILOG Broadband Antenna
SKU: 11821
Frequency Range: 30 MHz - 2 GHzMax Power: 1 kWPolarization: linearConnector: N - TypeInquire for Availability -
-
Haefely PCD 130 3 Phase Coupling/Decoupling Network for PSURGE 8000
SKU: sku-444
Weight: 69 kg (net weight)Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5Coupling: 3 Phase - 32 Amps, 690 VACDimensions: 45 x 50 x 57 cm (W x H x D)General Data: Technical DetailsIn Stock -
EM Test OCS 500N6F Simulator for Fast/Slow Damped Oscillatory Waves and Ringwave
SKU: 10413
Burst duration: 50 ms ±20%, at 3 MHz 15 ms ±20%, at 10 MHz 5 ms ±20%, at 30 MHzDamping Rate: Peak 5 to be more than 50% of peak 1 value Peak 10 to be less than 50% of peak 1 valueOscillation Frequency: 3 MHz, 10 MHz and 30 MHz, ±10%Source Impedance: 50 ohm ±20%Voltage: Voltage (o.c.) at HV output 450 V - 4,400 V ±10%Inquire -
3ctest SG 5010H 10kV Surge Simulator for IEC 61000-4-5, GB/T, ITU-T K21/K44
SKU: sku-326
Polarity: +/-, positive first or negative firstWeight: Approximately 300 kgCombination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5Coupling: 1 or 3 Phase 16 Amps 250V/450VImpedance: 500Ω±10％ -
Teseq ISN S752 Impedance Stabilization Network for Coaxial Lines
SKU: sku-174
Weight: approx. 1.5 kgDimensions: (W x H x D): 100 mm x 100 mm x 240 mmFrequency Range: 150 kHz to 230 MHzImpedance: 150 Ω ±20 ΩRF Input Voltage: 20 V