Categories
Test Equipment, Systems & Solutions
-
EFP18G 3-Axis E-Field Probe 3 MHz - 18 GHz
SKU: 12189
Weight: 0.2 lb, 100 gDimensions: (LxD): 9.0x2.25 inch, 230x58 mmFrequency range: 3 MHz-18 GHzApplications: RF Interference Analysis and EMF SniffingConnector Type: SMA(f)$4,860.00In Stock -
SteppIR SYS3-EMC E-Field Generator 20 MHz - 300 MHz, 200 V/m
SKU: sku-2122
Connector: N-Type, femaleFrequency Range: 20 MHz to 330 MHzImpedance: 50 ohmMax Radiated Field Strength: 200 V/mStandards Met: MIL 461 -
-
In Stock -
Teseq CDN 3425 Burst/EFT Coupling Clamp
SKU: sku-1065
Application/Test Type: Electrical Fast Transients on Data Lines (EFT Burst)Compatible Impulse Generators: Any EFT/Burst Generators (custom HV cable may be required)Standards Met: IEC / EN 61000-4-4Inquire for Availability -
Amplifier Research (AR) FL7006 Electric Field Probe Kit, 100 kHz - 6 GHz
SKU: 57543
Application/Test Type: Monitoring Electric Field StrengthsField Strength Range: 0.5 to 800 V/m (0.01 V/m)Frequency Range: 100 kHz to 6 GHzStandards Met: IEC/EN 61000-4-3Interfaces: USB, IEEE-488 (GPIB), RS-232 (serial), Fiber-Optic SerialBattery Life: 60-80 hoursTypically In Stock -
Fischer Custom Communications FCC F-120-1 Bulk Current Injection Probe
SKU: 11268
Aperture: 40 mm (1.57 inches)Insertion Loss: Less than 16dB / 5MHz - 80MHzMaximum Continuous Power: 100 Watts (for 30 minutes)RF Connector: N-type (f)Fre: 10 kHz - 175 MHzStandards Met: IEC 61000-4-6Applications: Bulk Current Injection BCI Testing, RF Conducted Immunity Testing$295.00 - $3,950.00In Stock -
Fischer FCC-TLISN-T4-02 CISPR 22 Impedance Stabilization Network (ISN)
SKU: 484
Application/Test Type: Measuring conducted emissions on two balanced pair telecom ITE’s.Common Mode Impedance: 150 ± 20ΩCurrent Rating: 250 mA MaximumDecoupling of Common Mode Disturbance: 35 dB min. to 150 kHz; 55 dB min up to 30 MHzFrequency Range: 150 kHz to 30 MHzMains & EUT Connections: D-sub 25 femaleRF Connector: 50Ω BNC femaleVoltage Division Factor: 9.5 dB ±1 dBVoltage Rating: 63 VAC RMS, 100 VDCTest Standards: CISPR 22 (ISNs)$395.00 - $2,750.00In Stock -
Teseq CDN 3083-Burst 1000 Volt, 100-200 Amp Coupler for EFT/Burst
SKU: sku-221
Weight: 11 kg (24 lbs)Application/Test Type: EFT/Burst immunity testing of equipment requiring large currents, specially designed for heavy industry, smart grid and electro vehicle applications.Current Rating: 100 Amp or 200 Amp continous depending on modelCompatible Impulse Generators: Any EFT/Burst Generators (custom HV cable may be required)Mains & EUT Connections: SHV; Screw terminals, rated for 200 AStandards Met: IEC / EN 61000-4-4 up to 8.8 kVVoltage Rating: 690 V AC RMS; 1000 VDC$395.00 - $495.00In Stock -
Empower BBS3K5OKO RF Power Amplifier
SKU: 6212
Frequency Range: 500 MHz - 2700 MHzOutput Power: 100 W$10,095.00Typically In Stock -
Rent Com-Power AH-118 Horn Antenna 700 MHz - 18 GHz
SKU: sku-690
Weight: 3 lbs. [1.4 kg]Antenna Factor (1 Meter): 26.4 to 47.4 (average: 38.9) [dB(m-1)]Antennas: Double Ridge Guide Horn AntennaConnector: Precision N-type (female)Dimensions: 5.6” x 9.5” x 8.1”[14.2 x 24.1 x 20.6 cm]Frequency Range: 1 GHz to 18 GHz (useable from 700 MHz)Gain: 3.6 to 12.6 (average: 9.1) dBiImpedance: 50 OhmsMaximum Continuous Power: 300 WattsVSWR: 1.58 to 3.32 (average: 2.25) :1$319.00Inquire for Availability -
Teseq NSG 1007 Programmable AC and DC Power Sources for IEC 61000-3-2 and -3-3
SKU: 11494
Test Standards: IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-11Application/Test Type: Medical Device EMC TestingsInquire for Availability