Categories - Page 130 - The EMC Shop

Test Equipment, Systems & Solutions

3cTest SEPN 61000T Surge/EFT Coupling Network for 3 Phase/100Amp/690V DUT

SKU: 30072

EFT/Burst Coupling Capacitor: 33nF

Decoupling Inductance:: 150uH

Surge Coupling Capacitor: 9/18uF

Common-mode Resistor: 0/10 Ω

Decoupling Inductance: 1.5mH

Load Capacity: Three phase Max. AC690V 100A

Dimensions: 35U

Test Standards: IEC 61000-4-4, IEC 61000-4-5

Inquire for Availability

VIEW PRODUCT Cart
Schwarzbeck HFRA 5149 H-Field Transmit Loop VLF / HF

SKU: 30111

Frequency Range: 9 kHz – 30 MHz

SWR: < 2 (0.02 – 20 MHz)

Connectors: N-Type (f)

External Termination: 50 Ω

Directive Pattern: 2 x 90° half power vertical axis

Applications: Antenna Pattern Measurement

Typically in Stock

VIEW PRODUCT Cart
Maturo TT2.0WF Turntable

SKU: sku-1410

Diameter: 6.5 ft

Load Capacity: 1100 Lbs

Height: 5.5"

Control: Fiber and GPIB

Weight: 400 Lbs

VIEW PRODUCT Cart
Schwarzbeck NFPA 9730 Power Amplifier DC - 250 kHz

SKU: 30020

Frequency Range: DC to 250 kHz

Gain at 8 Ω impedance: 28 Arms

Continuous Operating Current (AC): 0.25 Ω @ AC>15 Hz

DC Max. Current Output: 20 A (Load impedance 1.0 Ω min.)

Input Resistance (typical): 1 kΩ

Input Connector: BNC

Output Connector: Wing terminals

Applications: Radiated Immunity

Inquire for Availability

VIEW PRODUCT Cart
Haefely FP-COMB 32 Automatic 3-Phase Coupler for AXOS System

SKU: sku-786

Burst (EFT) 5/50 ns: Pulse conforms to IEC/EN 61000-4-4

Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5

Pulse amplitude: 5 kV

Voltage: 7 kV

Compatible Impulse Generators: Haefely AXOS5, Haefely AXOS8

Typically in Stock

VIEW PRODUCT Cart
EM Test Netwave 3.1 Programmable AC/DC Power Source

SKU: sku-748

Frequency Range: DC - 5,000 Hz

Test Standards: IEC 61000-3-11, IEC 61000-3-12, IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-7, IEC 60601-1-2 and more

Applications: Flicker and Harmonics Testing

Inquire for Availability

VIEW PRODUCT Cart
Com-Power ISN-T8 Impedance Stabilization Network 150 kHz to 30 MHz

SKU: 30151

Weight: 1.4 lbs. (0.6 kg) [ISN + LCL Adapter + Connecting Adapter]

Current Rating: 800 mA (per line), 1.6 Amps (per pair)

Dimensions: see photo in images

Frequency Range: 150 kHz to 30 MHz

Isolation: 150 kHz to 1.5 MHz: 35 to 55 dB 1.5 MHz to 30 MHz: 55 dB

Mains & EUT Connections: D-sub 25 pin female connectors

RF Connector: 50Ω N-type (female)

Standards Met: CISPR 16-1-2, CISPR 22

Voltage Rating: 50 VDC / 32 VAC (line to ground @ 50/60 Hz)

Cost New:

Was:

Price Now:

$410.00 - $4,100.00

Typically in Stock

ORDERING OPTIONS
EM Test UCS500N7 Multifunctional Transient Immunity Simulator

SKU: sku-241

Test Capabilities: Combination Wave Surge Immunity , EFT/Burst, Dips Interrupts & Variations

EMC Standards: IEC 61000-4-5, IEC 61000-4-4, IEC 61000-4-11

Test Setup Guides: Electrical Transient and Noise, Surge Immunity, Power Failures

EFT/Burst Pulse Output Capability: ±200 V to 4.8 kV (in 1 V steps) - open circuit±100 V to 2.4 kV ±100 A to 2.2 kA

Combination/Wave Surge Output Capability: 250 V - 6,000 V ± 10%

External Coupling: Data Lines (EFT & Surge), 3PH EUT

Phase synchronization: 0° - 360°, resolution 1° (16 - 500Hz)

Ringwave 0.5 μs/100 kHz: Pulse conforms to IEC/EN 61000-4-12 and ANSI (IEEE) C62.41

Telecom Surge: As per FCC part 68, Pulse B, IEC 61000-4-5, ITU and ETSI recommendations

Inquire for Availability

VIEW PRODUCT Cart
TTi PSA6005 Handheld Spectrum Analyzer 6 GHz

SKU: 5290

Frequency Range: 10 MHz to 6 GHz

Phase Noise (Typical): -83 dBc/Hz at 30 kHz offset, -97 dBc/Hz at 100 kHz offset, -114 dBc/Hz at 1 MHz offset

Display Range: 84 dB from reference level

Flatness: Better than ± 1 dB relative to 2000MHz over the the full operating frequency range

Displayed Average Noise Level: Better than – 120 dBm (-13 dBuV) average displayed noise floor

RF Input Connector: Standard N Type

Cost New:

Was:

Price Now:

$435.00 - $4,335.00

In Stock

ORDERING OPTIONS
Amplifier Research 100W1000B 1 MHz - 1 GHz

SKU: 8287

Frequency Range: 1 MHz - 1 GHz

Output Power: 100 W

Flatness: ±2.0 dB maximum, 1.5 dB typical, ±0.8 dB with internal leveling

Gain: 50 dB minimum (at max setting)

Input Impedance: 50 ohms, VSWR 2.0:1 maximum

Output Impedance: 50 ohms nominal

Typically In Stock

VIEW PRODUCT Cart
Tomco RF Amplifier BT01000-AlphaS .1 MHz - 30MHz

SKU: sku-2308

Max Frequency: 30 MHz

Min Frequency: 100 kHz

Output Power: 800 Watts Pulse

Applications: Particle, Plasma, Magnetic, Radar, NMR, MRI, EPR, ESR,ENDOR and NQR

AC Input Power: 110-240V/1PH/1kVA

Gain: 60dB

VIEW PRODUCT Cart
EFP18G 3-Axis E-Field Probe 3 MHz - 18 GHz

SKU: 12189

Weight: 0.2 lb, 100 g

Dimensions: (LxD): 9.0x2.25 inch, 230x58 mm

Frequency range: 3 MHz-18 GHz

Applications: RF Interference Analysis and EMF Sniffing

Connector Type: SMA(f)

Cost New:

Was:

Price Now:

$4,860.00

In Stock