Rent or Buy Ring Wave Immunity Generators

Ring Wave Immunity Generators

(Showing 12 of 13)

Stand alone ring wave impulse generators for single and three-phase power and data lines. Meet IEC 61000-4-12, ANSI C62.41, and other ring wave immunity testing standards. The EMC Shop stocks all types of Ring Wave Immunity Generators for compliance and pre-compliance testing. Rent or buy Ring Wave Immunity Generators for individual tests or multifunction generators to complete an assortment of tests in a compact solution. Most systems can be easily upgraded to include additional tests as required.

Get Application Support, Pricing, Lead Time and More: Contact Form

Ring Wave Immunity Generators are typically benchtop, but heavy equipment. When doing testing on three phase power lines systems usually require much larger coupling/decoupling networks which substantially increase system size. EM test environments with ground planes with connections to earth are required to safely use transient generators.

Ring Wave Immunity Generator Tests

For compliance, the ring wave has a measured 0.5 us rise time and 100 kHz oscillation frequency This impulse is commonly used for applications related to power distribution and railway environments.

Ring Wave Immunity Generators Test Equipment, Systems & Solutions

EMC Partner MIG0603 Damped Oscillatory Wave Generator System

Frequency: 100 kHz - 1 MHz

Voltage range: 0.2 up to 3 kV

Source impedance: 200 ohms

Damping rate: 50% between 3rd and 6th periods

Pulse rise time: 75 ns

Burst repetition: 100 kHz up to 50 Hz

Burst repetition: 1 MHz up to 500 Hz

Voltage increment: 1 V steps

IN STOCK

View Product Cart
Thermo Keytek EMCPro Plus EMC Immunity Test System

SKU: 11054

Test Capabilities: Surge Immunity (Combo/Ring/Telecom Waves), EFT/Burst, Dips Interrupts & Variations

Standards Met: IEC/EN 61000-4-4, IEC/EN 61000-4-5, IEC/EN 61000-4-11

Max EUT Voltage (w/ Built in CDN): 250 Volts

Max EUT Current (w/ Built in CDN): 16 Amps

EFT/Burst Pulse Output Capability: 4 kV

Combination/Wave Surge and Ring Wave: 6 kV

Test Setup: Conducted Immunity/Susceptibility Test Setup

MSRP:

Was:

Price Now:

$1,695.00

In Stock

Ordering Options
3ctest RWS 600 Ring Wave Simulator for IEC 61000-4-12

SKU: sku-595

Display Interface: 5.7 inch TFT touch screen

Phase synchronization: 0°-360°, 1° step or random

Polarity: Positive. negative, alternating

Pulse current (short circuit): 500A ± 10% at 12Ω; 200A ± 10% at 30Ω

Pulse voltage (open circuit): 0.25 kV–6.0kV ± 10%

Ringwave 0.5 μs/100 kHz: Pulse conforms to IEC/EN 61000-4-12 and ANSI (IEEE) C62.41

Test duration: 1s-99s

4-6 Weeks

View Product Cart
Haefely PIM 110 Ring Wave Immunity System for IEC 61000-4-12

SKU: sku-544

Impedance: 12, 30 & 200 Ohms

Applications: Surge Immunity Testing

Ring Wave: 0.5us - 100kHz (voltage & current)

Pulse repetition: 12 per minute

Pulse Voltage: 0.20 – 7.8kV

Compliance Standards: IEC/EN 61000-4-12 and ANSI (IEEE) C62.41

Test duration: 5 seconds

MSRP:

Was:

Price Now:

$995.00

In Stock

Ordering Options
Haefely PIM 150 Oscillating Wave Surge Generator

SKU: 10526

Burst frequency: 100 kHz & 1 MHz

Coupling: Single & Multiple Path

Mains & EUT Connections: HV connector & CDN

Source Impedance: 200 ohms

Standards Met: IEC 61000-4-18 Power & Data lines; ANSI C37.90.1, IEC 60255-22-1, IEEE 1613

In Stock

View Product Cart
EMC Partner MIG-OS-OS1 Oscillatory Wave Generator

SKU: 5707

MSRP:

Was:

Price Now:

$19,500.00

Inquire for Availability
EMC Partner DOW 3000 Slow/Fast Damped Oscillatory Wave Generator

SKU: sku-414

View Product Cart
EM Test OCS 500N6F Simulator for Fast/Slow Damped Oscillatory Waves and Ringwave

SKU: 10413

Burst duration: 50 ms ±20%, at 3 MHz 15 ms ±20%, at 10 MHz 5 ms ±20%, at 30 MHz

Damping Rate: Peak 5 to be more than 50% of peak 1 value Peak 10 to be less than 50% of peak 1 value

Oscillation Frequency: 3 MHz, 10 MHz and 30 MHz, ±10%

Polarity: Positive, negative

Rise Time: 75ns ± 20%

Rise Time-2: 5 ns ±30%

Source Impedance: 50 ohm ±20%

Voltage: Voltage (o.c.) at HV output 450 V - 4,400 V ±10%

Weight: 32 kg (1-phase) 50 kg (3-phase)

Slow Damped Oscillatory Waves: As Per EN/IEC 61000-4-18

Burst Duration: At least 2s

Damping Rate-2: Peak 5 to be more than 50% of peak 1 value Peak 10 to be less than 50% of peak 1 value

Dimensions: 19" / 9 HU, approx. 19" / 9 HU, approx.

Fast Damped Oscillatory Waves: As Per EN/IEC 61000-4-18

Frequency: 100 kHz ± 10%

General Data: Technical Details

Impedance: 12ohm and 30ohm ± 20%

Oscillation Frequency-2: 100kHz and 1MHz ± 10%

Peak current: Max. 500A @ 12ohm or Max. 200A @ 30ohm internally;

Polarity-2: Positive, negative

Pulse repetition: 1 to 60 transients per minute

Repetition Rate: Max. 5,000 /s ±10%

Ringwave 0.5 μs/100 kHz: Pulse conforms to IEC/EN 61000-4-12 and ANSI (IEEE) C62.41

Rise time: 0.5 us ± 30%

Source impedance: 200ohm ± 20%

Spike frequency: 100kHz ± 10%

Supply Voltage: 115/230V +10/-15%

Test Voltage: 250 V - 6,000 V ± 10%

Voltage-2: Voltage (o.c.) at HV output 250 V - 3,000 V ± 10% Voltage (o.c) at line output 250 V - 2,500 V ± 10%

View Product Cart
Teseq NSG 3060 Surge/EFT Generator

SKU: 1166

Test Capabilities: Combination Wave Surge Immunity, EFT/Burst, Dips Interrupts & Variations

Standards Met: IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-11, IEC/EN 61000-4-29

Applications: CE Marking, Medical Devices, Industrial Machinery, Electronics & IT

EFT/Burst Pulse Output Capability: ±200 V to 4.8 kV (in 1 V steps)

Combination/Wave Surge Output Capability: ± 200 V to 6.6 kV (in 1 V steps)

External Coupling: Built-in CDN Specs reference CDN 3061 (INCLUDED), Optional - Data Lines (EFT & Surge), 3PH EUT

Dips & Interrupts: 0, 40, 70, 80% (INA 650x)

IN STOCK

View Product Cart
Haefely PSURGE 8000 EMC Surge Platform with Expandable PIM Modules

SKU: 11411

Applications: Surge immunity - Combo Wave, Ring Wave and Oscillatory Waves

Surge/Combination Wave: IEC/EN 61000-4-5 Ed. 1 & 2, ANSI C62.45

Ring Wave: IEC/EN 61000-4-12, IEC/EN 61000-4-5 Ed. 1 & 2, ANSI C62.45

Damped Oscillatory Wave: EC 61000-4-18, ANSI C37.90, IEC 60255-22-1, IEEE 1613

Telecom Surge: IEC/EN 61000-4-5 , ITU K-series and IEC 60950

In Stock

View Product Cart
EMC Partner MIG0603IN1 S-R Surge and Ringwave Impulse Generator

SKU: 4582

Standards Met: IEC/EN 61000-4-5, IEC/EN 61000-4-12

Applications: EMC Surge, Precompliance EMC Testing

Max EUT AC Voltage (W/ Built In CDN): 280 Volts

Max EUT AC Current (W/ Built In CDN): 16 Amps

Combination/Wave Surge Output Capability: 6 kV

External Coupling: Data Lines (Surge), 3PH EUT

MSRP:

Was:

Price Now:

$17,950.00

Inquire for Availability
Keytek E503 Ring Wave Simulator for ANSI/IEEE C62.4 and UL 864

SKU: sku-546

Pulse current (short circuit): Selectable at 200A max. or 500A max., when the open-circuit voltage is set to 6.0kV.

Pulse repetition: 1 shot/9 seconds

Pulse voltage (open circuit): 200V - 6.6kV ± 10%

Ringwave 0.5 μs/100 kHz: Pulse conforms to IEC/EN 61000-4-12 and ANSI (IEEE) C62.41

Standards Met: ANSI/IEEE C62.41 Cat. A and B, and various UL standards, including UL 864

IN STOCK

View Product Cart

Ring Wave Immunity Generators

Ring Wave Immunity Generator Tests

Ring Wave Immunity Generators Test Equipment, Systems & Solutions

Connect with The EMC Shop