Standards Categories
Standards Test Equipment
-
EM Test LD 200N Load Dump Generator for ISO 16750-2
SKU: 5955
Output: +/- output Safety laboratory connectors Coupling To the battery +lineDecoupling Via diodeDUT supply Max. 80V/30AFreestyle Mode Micropulses: Rise time 1us 10us - 90us with 10us steps 100us - 900us with 100us steps 1ms - 10ms with 1ms steps Pulse duration 10ms - 1,200ms Int. resistor 0.5ohm - 38ohm, in steps of 0.1ohmTest Standards: ISO 7637-2 Pulse 5b for 12V and 24V, ISO/WD 16750 Pulse 5b, and much moreTest Routines: Quick Start, User Defines Routines, Standards Test Routines Service$1,690.00 - $2,290.00Typically In Stock -
Teseq CIP 9136A Bulk Current Injection Test Clamp
SKU: 8766
Aperture: 43 mm (1.7 inches) inside; 113 mm (4.44 inches) outsideConnector: N-Type up to 1,000 WattsDimensions: 61 mm wide (2.4 inches)Frequency Range: 4 kHz - 400 MHzImpedance: 100 Ω typical at resonance$440.00Typically in Stock -
3ctest EFT 500S Burst/EFT Simulator up to 4.8 kV w/ Single Phase CDN
SKU: 11521
Standards Met: IEC/EN 61000-4-4, IEC 61326, EN 61000-6-1, IEC 61850-3, EN 61000-6-2Applications: EFT Immunity, CE Marking, Medical Devices, Industrial Machinery, Electronics & ITMax EUT AC Voltage (w/ Built in CDN): 264VoltsMax EUT AC Current (w/ Built in CDN): 16 AmpsMax EUT DC Voltage (w/ Built in CDN): 125 Volts6-8 Weeks -
Solar 2654-2 Lightning Transient Generator for DO-160 Section 22
SKU: 10504
Applications: Military & Aerospace EMCCapabilities: DO-160 Section 22 Level III, Single & Multiple Stroke, Multiple BurstTest Capabilities: Level IIITypically In Stock -
Dressler S-25 Coupling/Decoupling Networks (CDN) 150 kHz-230 MHz
SKU: sku-397
Weight: 2.8 Lbs (1.27 kg)Current Rating: 1.5 AmpsFrequency Range: 150 kHz to 230 MHzRF Connector: BNCStandards Met: IEC/EN 61000-4-6 -
EM Test DPA 500N Power Analyzer for Harmonics & Flicker
SKU: sku-242
Standards Met: IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-11Application/Test Type: Medical Device EMC TestingsTypically In Stock -
EM Test VSS 500N10 High Voltage Transient Surge Simulator
SKU: 30060
Compatible CDN's: CNV 501S4, CNV 501S4.1, CNV 503S9, CNV 503N10.1, CNV 503S11, CNV 503S12Applications: Conducted ImmunityTest Standards: IEC/EN 60065, IEC/EN 60950-1, UL 6500Surge Output Voltage: 500V to 10 kVTypically In Stock -
Teseq ISN ST08C Impedance Stabilization Network for Shielded Balanced Pairs
SKU: sku-170
Frequency Range: 150 kHz to 230 MHzImpedance: 150 Ω ±20 ΩRF Input Voltage: 20 V -
Teseq (Schaffner) AMZ 41 CISPR 14 Absorbing Clamp for Measuring Power Disturbances
SKU: 6861
Frequency Range: 30 MHz to 1000 MHzMin. Site Attenuation: 13 dB to 22 dBClamp Factor: -4 dB to +5 dBDecoupling factor DF: >21 dBDecoupling factor DR: >30 dB$4,965.00In Stock -
Narda PMM EP-600 Isotropic E-Field Probe 100 kHz-9.25 GHz
SKU: 6347
Application/Test Type: Monitoring Electric Field StrengthsField Strength Range: 0.14 to 140 V/m (0.01 V/m)Frequency Range: 100 kHz to 9.25 GHzStandards Met: IEC/EN 61000-4-3Interfaces: Fiber-OpticTypically In Stock -
Narda SHC-2/1000 CISPR Passive Voltage Probes
SKU: 8330
Frequency Range: 9 kHz to 30 MHzInput Resistance: 1500 Ω ± 80 ΩInsertion Loss: 30 dB ± 1.5 dBApplications: Conducted Emissions, Radiated EmissionsTest Standards: CISPR, MIL-STD-461, ANSI C63.4$295.00 - $2,950.00In Stock -
PMM 9010F CISPR 16-1-1 and MIL-STD-461 Compliant EMC/EMI Receiver
SKU: 3246
Compliant Standards: CISPR 16-1-1, ANSI C63.2, MIL‑STD‑461 and FCC$750.00INQUIRE