IEC/EN Standards Categories
IEC/EN Standards Test Equipment
-
-
EM Test CWS 500N1 Continuous Wave Simulator for IEC 61000-4-6
SKU: sku-410
Weight: 17 kg (37.5 Pounds)Application/Test Type: Create and output RF currents as well as measure input for CDN and clamp calibration as well as current monitor for clamp applicationsDimensions: 19"/3 HUFrequency Range: Sinus (CW) 100kHz to 300MHz Frequency bands 100kHz to 9.999MHz 10MHz to 99.99MHz 100MHz to 300MHzImpedance: 50 OhmsInquire for Availability -
EM Test TSS 500N10 Telecom Surge Generator ITU-T for Enhanced Level Testing up to 10 kV
SKU: sku-403
Weight: approx. 37.1 kg (81.8 lbs.)AC Power Adapter: Supply voltage 115/230 V +10/-15%Dimensions: 19"/9 HU, 420 mm x 448 mm x 500 mmEnergy Storage Capacitor: 1 uF (Pulse 1.2/50 us) 20 uF (Pulse 10/700 μs) 20 uF (Surge Pulse B)Front Time: 1 us ± 30% (Pulse 1.2/50 us) 10 us ± 30% (Pulse 10/700 μs) 9 us ± 30% (Surge Pulse B) -
EM Test TSS 500N4 Telecom Surge Generator as per ITU / FCC up to 4 kV
SKU: sku-402
Weight: approx. 20 kg (44 lbs.)AC Power Adapter: Supply voltage 115/230 V +10/-15%Dimensions: 19"/3HUStandards Met: IEC 61000-4-5 ITU-T K.17 ITU-T K.20 ITU-T K.28 ITU-T K.45 (and more)Voltage Rating: 160 V - 4,000 V ±10% -
Dressler T4 CDN for Unshielded Symmetrical Telecom Lines 150 kHz-230 MHz
SKU: sku-401
Weight: 2.3 Lbs (1.04 kg)Application/Test Type: For CDN disturbing signals to an unscreened cable with balanced linesCurrent Rating: 2 AmpsDimensions: 7.25 x 4.25 x 5.75 (inches)Frequency Range: 150 kHz to 230 MHz -
Dressler S1 Coupling/Decoupling Networks (CDN) 150 kHz-230 MHz
SKU: sku-399
Weight: 1.9 Lbs (0.86 kg)Application/Test Type: For coupling and decoupling of interference signals on screened linesCurrent Rating: 1.5 AmpsDimensions: 7.25 x 4.25 x 5.75 (inches)Frequency Range: 150 kHz to 230 MHz -
Dressler AF4 Coupling/Decoupling Networks (CDN) 150 kHz-230 MHz
SKU: sku-398
Weight: 3.3 Lbs (1.5 kg)Current Rating: 2 AmpsFrequency Range: 150 kHz to 230 MHzRF Connector: BNCStandards Met: IEC/EN 61000-4-6 -
Radiated Immunity Test System for IEC 61000-4-20 TEM Waveguides
SKU: 10393
Application/Test Type: Radiated Susceptibility TestingFrequency Range: 30 to 1000 MHzMax Radiated Field Strength: Lowest field strength: 1 V/m at 600 mm septum height* Highest field strength: approx. 18 V/m at 600 mm septum height*Maximum Continuous Power: Lowest forward power: 15 dBm* Highest forward power: 41 dBm*Test Standards: MIL-461 RS103, IEC/EN 61000-4-3, ISO 11452-2, DO-160 Section 20 -
3ctest CWS 600 6kV Surge Simulator for IEC 61000-4-5
SKU: 11331
New Systems: Inquire to purchase a new unitStandards Met: UL 1449, IEC/EN 61000-4-5, IEC/ISO 60601-1-2Coupling: Single Phase Built in, 16A, 250VAC, 120VDCApplications: EMC Surge, CE MarkingMains & EUT Connections: 4mm banana plug$1,490.00 - $18,950.00In stock -
Thermo-Keytek MZ15/EC Minizap ESD Simulator
SKU: 10322
Voltage Range (Contact Mode): ±0.5 to 8 kV±0.5 to 15 kV (Air Discharge): ±0.5 to 15 kVEMC Standards: IEC 61000-4-2R/C Network: 150 pF/330 ohm standardDischarge Frequency Range: Single shot as well as 1/sec and 20/sec repetitive operation$495.00 - $6,250.00In Stock -
Haefely ECOMPACT4 Precompliant EMC Impulse Generator
SKU: sku-320
Test Capabilities: Combination Wave Surge Immunity , EFT/Burst, Dips Interrupts & VariationsStandards Met: IEC/EN 61000-4-4Applications: EMC Precompliance Testing, CE Marking, Medical Devices, Industrial Machinery, Electronics & ITTest Setup Support: Conducted Immunity/Susceptibility Test SetupMax EUT Current (w/ Built in CDN): 16 AmpsTypically In Stock -
Teseq NSG 435 ESD Gun
SKU: 11449
Test Standards: IEC 61000-4-2Applications: Medical, Commercial Electronics, IT, and moreTest Capabilities: Air/Contact up to 15kVPre-programmed Test Limits: YesMore Resources: Test Setup, ESD Waveform, RMA Form$590.00 - $5,750.00In Stock
Rent, buy or lease test equipment built according to the IEC/EN normative referenced in product certification standards. The EMC Shop supplies the equipment for CE, UL, FCC, TUV, CSA and other product marks for your product. Even though there are thousands of standards for the variety of applications and industries, many EMC, EMI and RF tests refer back to the IEC/EN international compliance standards.