Description
ESD Simulator for Requirements with Different R (Ω) and C (pF) Combinations
The Schloder ESD Simulator SESD 30000 can be used for EMC tests on systems and installations according to the standards ISO 10605, MIL-STD-883, JEDEC 22 and more. For the common IEC / EN 61000-4-2, the Schloder SESD 230 is a better solution. The flexible set-up of the SESD 30000 allows further tests according to different standard and customer definitions.
With Self-Test of the Simulator
- Saving costs for re-calibration
- Absolutely necessary for automatic tests
Benefits:
- Capacity modules available up to 1000 pF
- Resistor modules available from 50 Ohm up to > 5 kOhm; Special module 0 Ohm (only for air discharge)
- Automatic polarity switching module (optional)
- Fast Rise Time module for tr <0,5 ns (optional). Possibility more aggressive tests (e.g. ANSI)
- Desktop control unit with a big display and digits which are easy to read
- All modules are electronically recognised and identified on the display
- Ergonomic grip with big trigger key
- Big keys for easy and fast parameter adjustments
- User defined adjustments possible: contact discharge with contact control or external triggering
- Optional Software with RS 232 optical set with 10 m fibre optics cable
- Self- test of the ESD-generator, adjustment by remote control or service menu
Performance feature
- Contact control
The simulator has a "Contact control". When testing "CON" touches the test tip the surface of the EUT. When not contacted, will be no triggering of the pulse. The display shows "No contact". This ensures that at contact discharge actually occurs a discharge. - Always ready to use
The simulator operates on battery power. If the battery is empty, it can immediately be charged with the charger provided. Loading bar in the display indicate the charging status.
No change of the battery required! (according to experience replacement battery are also empty if you need them).
Schloder SESD 30000 Technical Data | |
Output voltage | adjustable via digital pot. |
Air discharge | 1 kV up to 30,0 kV in steps of 100 V |
Contact discharge (with contact control) |
1 kV up to 30,0 kV in steps of 100 V |
Polarity | Positive and Negative |
Mode | Mode air discharge and contact discharge |
Repetition frequency of the discharge pulses | |
Air discharge | single or multiple pulses |
Contact discharge | single pulse, 0.1 Hz, 0.2 Hz, 1 Hz, 2 Hz, 5 Hz, 10 Hz, 20 Hz |
Continuous operation | At air discharge and contact discharge |
Pre-selection counter | 1 - 9999 |
Standard Impedances | 150 pF / 330 ? (IEC / EN 61000-4-2) |
Probes | acc. IEC / EN 61000-4-2 |
Operation Temperature | 0 - 40° Centigrade |
Rel. Humidity | 0 - 60% |
Weight | App. 1500 g |