Categories
-
Com-Power ISN-T8 Impedance Stabilization Network and Calibration Kit
SKU: 30149
Weight: 1.4 lbs. (0.6 kg) [ISN + LCL Adapter + Connecting Adapter]Current Rating: 800 mA (per line), 1.6 Amps (per pair)Dimensions: see photo in imagesFrequency Range: 150 kHz to 30 MHzIsolation: 150 kHz to 1.5 MHz: 35 to 55 dB 1.5 MHz to 30 MHz: 55 dBTypically in Stock -
CALL FOR LEAD TIME -
3ctest CDN 405T8 Surge Coupler for High Speed Data Lines
SKU: 6911
Application/Test Type: Surge Immunity, Conducted SusceptibilityTest Standards: IEC 61000-4-5Data Transmission Rates: 1,000 MBit/sPoE: YesMax Surge Voltage: 5 kVTypically In Stock -
Com-Power CDN-M1100 150kHz - 230MHz Single line Plus Neutral 100 Amp
SKU: 30076
Frequency Range: 150 kHz to 230 MHzCurrent Rating: 100 AApplications: RF Conducted Immunity TestingTest Standards: IEC 61000-4-6Common Mode Impedance 150 kHz - 26 MHz: 150Ω ± 20ΩInquire for Lead Time -
Amplifier Research DC3001 100kHz-1000MHz 40 dB Dual Directional Coupler
SKU: 5854
Max Frequency: 1 GHzMin Frequency: 100 kHzCoupling Value: 40 dBMax Power Handling: 50 WattsConnectors (Main Line): N(f)Typically In Stock -
Inquire for Lead Time -
Com-Power LI-220C 9 kHz - 30 MHz LISN for CISPR 16-1-2/ANSI C63.4
SKU: 10878
Weight: 20.5 lbs / 9.3 kgApplication/Test Type: Power line conducted emissions testsCurrent Rating: 20 Amperes AC, 14 Amperes DCDimensions: 16.75 x 15.5 x 7.5 inches / 42.5 x 39.3 x 19 cmFrequency Range: 9 KHz - 30 MHz$295.00Typically In Stock -
Solar 7054-2 EMI Voltage Spike Generator
SKU: 30184
Test Standards: DO-160 SECTION 17, MIL-STD-462Applications: EMI/EMC For Military Aircraft And AviationSpike Amplitude: 10 - 400 VoltsSpike Repetition Rate: 0.8 - 10 Pulses Per SecondSpike Rise Time: 10 microseconds$1,750.00IN STOCK -
Fischer Custom Communications F-2031-A-DCN-23mm Decoupling Ferrite Tube for IEC 61000-4-6
SKU: sku-727
Weight: 7.5kGApplication/Test Type: ferrite decoupling clampDimensions: Aperture: 23mm Length: 610mm Height: 134mmFrequency Range: 100kHz - 100MHzStandards Met: IEC/EN 61000-4-6 -
EFT/Burst & ESD Rental Package for IEC 61000-4-2 and IEC 61000-4-4
SKU: sku-669
Burst (EFT) 5/50 ns: Pulse conforms to IEC/EN 61000-4-4Burst frequency: 1 Hz to 2 MHzBurst time: 0.01 to 999 msCoupling: Built-in Single Phase 250 Volts AC / 110 Volts DC and 16 AmpsPolarity: positive, negative, alternating$1,595.00In Stock -
Rohde & Schwarz OSP130 RF Switch
SKU: 438
Rated Frequency: 50 Hz to 60 Hz (± 10 %)Rated Voltage: 100 V to 240 V AC (± 10 %)Dimensions: 465.3 mm × 108.7 mm × 494.8 mmConnectors: USB type A; LAN: Ethernet RJ-45 connector (f), 10/100 Mbit/s; CAN: 9-pin D-Sub connector (m), 512 kbit/s$1,950.00In Stock -
EM Test Automotive Test System for ISO 7637-2
SKU: 10596
ISO Automotive Standards: ISO 7637-2, ISO 16750-2, ISO 11452-8Freestyle Mode Micropulses: Programmable Rise time 1us - 10us in steps of 1us; Pulse duration 50us - 10,000us; Int. resistor 2ohm - 100ohm in steps of 5ohm; 200ohm, 400ohm and 450ohmInput: DUT supply +/- DC voltage from VDS 200N or any other DC supply; Pulse 5, 7 From one LD 200NMicropulse: Micropulse module for test pulses 1, 2A and 6Inquire for availability