Categories

Test Equipment, Systems & Solutions

Keytek E503 Ring Wave Simulator for ANSI/IEEE C62.4 and UL 864

SKU: sku-546

Pulse current (short circuit): Selectable at 200A max. or 500A max., when the open-circuit voltage is set to 6.0kV.

Pulse repetition: 1 shot/9 seconds

Pulse voltage (open circuit): 200V - 6.6kV ± 10%

Ringwave 0.5 μs/100 kHz: Pulse conforms to IEC/EN 61000-4-12 and ANSI (IEEE) C62.41

Standards Met: ANSI/IEEE C62.41 Cat. A and B, and various UL standards, including UL 864

IN STOCK

View Product Cart
Schaffner CDN 8014 Burst/EFT Coupling Clamp for EN/IEC 61000-4-4

SKU: 10545

Compatible Generators: EFT Generators Electrical Noise/Transient Immunity

Standards Met: IEC/EN 61000-4-4

Cost New:

Was:

Price Now:

$2,990.00

Inquire for Availability
Materials for EFT/Burst Laboratory Test Setup

SKU: 11245

Floor Ground Plate Dimensions: 9" by 6" (Custom sizes available)

Standards Met: IEC 60601-1-2, IEC 61000-4-2

Applications: Test Setup for Burst/EFT, EMC Precompliance Immunity Testing

Table Dimensions: .8 meters (H)

Table Top Ground Plane: 1.6m x .8m

Additional App Notes: EFT Waveform Verification, Troubleshooting EFT Failures

IN STOCK

View Product Cart
Com-Power EMC Testing Turntables TTW-400 and TTW-600

SKU: TTW-400/600

Table Heights: 9 Inches

Load Ratings: 1000 lbs (455 kg)

Power: 115 VAC, 60 Hz

Remote Switches: Reversing drums

Extension Cables: 9.8 feet (3 meters)

Inquire for Availability

View Product Cart
Noiseken ESS-S3011A & GT-30RA Electrostatic Discharge Simulator System for up to 30kV Testing

SKU: 8250

Weight: Approx. 7.0kg (gun holder excluded) Approx. 7.5kg (gun holder included)

Air Discharge Voltage Range: 0.20kV to 30.0kV±5%（30.5kVmax）10.0kV : 0.01kV step 30.0kV : 0.1kV step

Standards Met: IEC 61000-4-2, ISO 10605

Battery: AC100V to AC240V 50Hz／60Hz ±10% 75VA

Contact Discharge Voltage Range: 0.20kV to 30.0kV±5% （30.5kVmax） 10.0kV : 0.01kV step 30.0kV : 0.1kV step

Polarity: positive/negative

Pre-Programmed IEC Levels: Yes

Resolution: 10 Volt steps up to 10 kV; 100 Volt steps to 30 kV

Typically In Stock

View Product Cart
Monthly Rental Teseq (Schaffner) CDN T002 Coupling Network for Unshielded Balanced Pairs

SKU: sku-318

Application/Test Type: EMC testing for unscreened data communication/telecom lines (Power over Ethernet, 1100BaseT4, 100Base VG-AnyLan, 1000BaseT, Token ring, ISDN, 10BaseT, 100BaseTX, ATM, FDDI, TP-PMD

Current Rating: 1.5 Amps (3/5 Amp models available)

Frequency Range: 150 kHz to 230 MHz (limited to 80 MHz on 3/5 Amp models)

Mains & EUT Connections: Banana, XLR, RJ45, RJ11

RF Connector: BNC, 50 Ω

RF Input Voltage: 30 Volts Max

Standards Met: IEC 61000-4-6

Voltage Rating: AC max. voltage (line to ground): 63 Volts DC max. voltage (line to ground): 100 Volts Test voltage: 200 VDC, 2 s

Cost New:

Was:

Price Now:

$99.00

Ordering Options
Em Test CWS 500N1.4 RF Conducted Immunity Test System for IEC 61000-4-6

SKU: 11251

Test Capabilities: RF Conducted Immunity

Standards Met: IEC/EN 61000-4-6

Applications: Radiated Immunity Debugging, CE Marking, Medical Devices, Industrial Machinery, Electronics & IT

CDN Test Levels (w/ built-in amplifier): 40Vrms

BCI Test Levels (w/ built-in amplifier): 8Vrms

Frequency Range (w/ built-in amplifier): 150 kHz - 230 MHz

Typically In Stock

View Product Cart
Com-Power FCLCE-1000 Current Probe Calibration Fixture

SKU: 11601

Output resistance: 50 Ohms

RF Connector: N-Type

View Product Cart
EMIC-20 EM Injection Clamp for IEC/EN 61000-4-6 Immunity Test

SKU: 7851

Standards: EN/IEC 61000-4-6

Application/Test Type: Injects the disturbance signal through a combination of inductive and capacitive coupling

Clamp factor (CF): -.5 dB at 100 kHz to -4 dB at 1 GHz (Min -7 dB at 700 MHz

Connector: N-type female

Dimensions: 632 mm x 120 mm x 80 mm

Frequency Range: 10 kHz to 1000 MHz

Max. Cable Diameter: 20 mm

Maximum Continuous Power: 0.15 to 100 MHz: 100 W for 15 min; 100 to 230 MHz: 100 W for 5 min; 230 to 1000 MHz: 50 W for 3 min

Cost New:

Was:

Price Now:

$595.00

Typically In Stock

Ordering Options
Teseq NSG 3040 Transient Immunity Test System

SKU: 4141

Test Capabilities: Electrical Transient and Noise, Surge Immunity, Power Failures

Standards Met: IEC 61000-4-5, IEC 61000-4-4, IEC 61000-4-11, IEC/EN 61000-4-29

Applications: CE Marking, Medical Devices, Industrial Machinery, Electronics & IT

Max EUT Voltage (w/ Built in CDN): 264 Volts

Max EUT Current (w/ Built in CDN): 16 Amps

EFT/Burst Pulse Output Capability: 4.8 kV

Combination/Wave Surge Output Capability: 4.4 kV

Generic Standards: IEC 61000-6-1, IEC 61000-6-2

Cost New:

Was:

Price Now:

$1,495.00

In Stock

Ordering Options
EMC Pioneer Aluminum Honeycomb Vent

SKU: sku-1348

View Product Cart
Schwarzbeck FMZB 1513 Active Receive Loop Antenna

SKU: sku-1262

Typically In Stock

View Product Cart

Test Equipment, Systems & Solutions

Connect with The EMC Shop