Test Application Categories
Test Application
-
Schwarzbeck TEMZ 5238 Symmetrical Stripline
SKU: 8951
Usable Frequency (TEM and higher modes): 120 MHzNominal Impedance: 188 ΩStanding Wave Ratio SWR typical: < 1.2Standing Wave Ratio SWR max: < 2Max. Fieldstrength (short time): 125 V/mIn Stock -
Langer EMV XF1 Near-Field Probes 30 MHz to 6 GHz
SKU: 8380
Probes: QTY 4 H-Field Probes (different heads) and QTY 1 E-Field ProbeConnectors: SMA (m)Applications: E-Field, H-Field, EMC Precompliance TestingResolution: < 1 mmFrequency Range: 30 MHz to 6 GHz (all probes)$275.00 - $3,209.00IN STOCK -
ISN30M Impedance Stabilization Network for CAT-6 Cable
SKU: 8455
Test Standards: CISPR 24, CISPR 32, CISPR 16-1-2 Annex ECable Type: Cat 6 (Cat 3 and Cat 5 with add-on module)Data Speed: 10GBASE-TCompliant to: CISPR 22, Appendix D, Fig. D.3$219.00 - $3,650.00In Stock -
RESA Realtime EMC Spectrum Analyzer
SKU: 2075
Frequency Range: 9 kHz - 3.2/7.5/13.2/26.5 GHzFrequency Resolusion: 1 HzReal Time Bandwidth: 25 MHz (40 MHz Optional)Range: 0 Hz (Zero Span), 100 Hz to Max FrequencyEMI bandwidth (-6dB): 200 Hz, 9 kHz, 120 kHz, 1 MHz (in accordance to CISPR 16-1-1)In Stock -
Amplifier Research FL8018 Isotropic Field Probe, CW and Pulse, 18 GHz
SKU: 11018
Frequency Range: 20 MHz - 18 GHzMeasurement Type: CW, AM & PulseField Strength Range: 2 – 1000 V/mDynamic Range: >54 dBIsotropic Deviation (Measured at Ortho Angle): ±0.5 dB @ 100 MHzInquire for Availability -
MIL-STD-461 CS101 Test Equipment Setup Rental Package
SKU: 22047
Test Standards: MIL-STD-461 CS101Frequency Range: 30 Hz to 150 kHz (Extendable down to 2 Hz and up to 500 kHz)Test Setup: Quick Start Guide ProvidedShipping: Same Day, Larger Systems go Freight$975.00 - $1,975.00Usually ships in 24 hours. -
3ctest Automotive Electrical Transient Test System
SKU: 11932
Applications: EMC Testing on EV Electric Vehicles Batteries & Charging Stations, Automotive Electrical DisturbancesISO Automotive Standards: ISO 7637-2, ISO 16750-2, ISO 11452-8Max Voltage (w/ Built In CDN): 60 VoltsMax Current (w/ Built In CDN): up to 200 AmpsTypically In Stock -
Thermo Keytek EMCPro Plus EMC Immunity Test System
SKU: 11054
Test Capabilities: Surge Immunity (Combo/Ring/Telecom Waves), EFT/Burst, Dips Interrupts & VariationsStandards Met: IEC/EN 61000-4-4, IEC/EN 61000-4-5, IEC/EN 61000-4-11Max EUT Voltage (w/ Built in CDN): 250 VoltsMax EUT Current (w/ Built in CDN): 16 AmpsEFT/Burst Pulse Output Capability: 4 kV$1,695.00 - $22,975.00In Stock -
EMC Partner ESD3000 ESD Generator
SKU: 10723
Weight: 1.7 kgBattery: at least 8 hour battery lifeVoltage Range: .08 up to 30kV depending on module typePre-Programmed IEC Levels: YesResolution: 100V steps$795.00 - $2,195.00Typically In Stock -
3ctest LDS 200 Automotive Load Dump Simulator
SKU: 6636
Applications: EMC Testing on EV Electric Vehicles Batteries & Charging Stations, Automotive Electrical DisturbancesDUT voltage: Max. 60VStandards Met: ISO 7637, ISO 16750-2, FMC1278, Many MorePower Input: AC 110/220V, 士10%,45-65HzDUT Max Current: 50 Amps$1,350.00 - $1,975.00IN STOCK -
ISO 11452-4 Level IV BCI Test System (200mA)
SKU: 570459
- Commonly used test systems for bulk current injection setup and test
- Precompliance EMC testing on automotive electrical components and assemblies accoring to ISO 11452-4
- Base package for Level 4, 200mA from 100 kHz to 400 MHz
- Expand systems to achieve up to 1000mA from 4 kHZ to 3 GHz
- ISO 17025 accredited calibrated systems available for test labs
$1,950.00 - $3,250.00Typically In Stock -
Teseq NSG 5500 Automotive Immunity Generator
SKU: 10257
Applications: Automotive Electrical Disturbances, EV EMC TestingTest Standards: ISO 7637Max EUT DC Voltage (w/ Built In CDN): 60 VoltsMax EUT DC Current (w/ Built In CDN): 30 AmpsPeak Inrush Current Capability: 300 AmpsInquire