Test Application Categories
Test Application
-
3ctest AN 150C10 High Voltage Artificial Network
SKU: 55114
Frequency Range: 10 Hz - 150 kHzOutput Impedance: 0mΩ，2*10mΩ，2*25mΩ，2*50mΩ，2*100mΩ，50mΩ， 100mΩ，200mΩInductance: 1 μHGrounding Capacitance: 1 μF or 220nFMax Input Voltage: 1,500 Volts DCInquire for Availability -
3ctest VTE 100 Transient Emission Test System
SKU: 61123
Operating Voltage: 60 VoltsOperating Current: 100 AmpsAN Frequency Range: 0.1 MHz - 100 MHzTest Standards: ISO 7637-2Typically In Stock -
3ctest CST 20150D IEC 61000-4-39 Conducted Immunity Tester
SKU: 55121
Test Standards: IEC 61000-4-39, IEC 61000-4-6Applications: Conducted Immunity2-3 Months -
Wavecontrol WPF6-HP Electric Field Probe for SMP Meters
SKU: 4423
Frequency range: 100 kHz - 6 GHzResolution: 0.02 V/m (until 7.5 V/m), 0.1 V/m (from 7.5 V/m to 130 V/m)Dynamic Range: 70 dBSensitivity: 0.3 V/mMeasurement Range: 0.3 – 1000 V/m (CW), 0.3 – 20 V/m (RMS)$695.00 - $995.00In Stock -
VSS 1275 Transient Surge Generator for MIL-STD-1275F
SKU: 8764
Industries: Military EMC TestingSurge/Spike Voltage: 30 to 300 VoltsRise Time: 1 - 20 msMax EUT Voltage: 40VMax EUT Current: 30 Amps (extendable to 400A)Typically In Stock -
EM Test Voltage Transient Emissions Tester AN 200
SKU: 1226
Voltage Range: 0-30 VDCRated Current: 25 APeak Voltage: 1000 VDimensions: Dimensions: (L x B x H): 425 x 530 x 180 mmInductance: (5 µH/5 mΩ)In stock -
EM Test VCS 500 M10 10kV Combination Wave Surge Immunity Generator
SKU: 17287
Test Standards: IEC/EN 61000-4-5, IEC/ISO 60601-1-2Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5Application Notes: EMC Surge Immunity Test Setup, CE MarkingMains & EUT Connections: External Coupler OnlyPhase synchronization: asynchronous, synchronous 0 to 359º (in 1º steps)Typically In Stock -
3ctest EDS 20H Hand-held 20kV Electrostatic Discharge ESD Simulator
SKU: 3209
Air Discharge Voltage Range: 1,000 Volts to 20,000 Volts ±5%Contact Discharge Voltage Range: 1,000 Volts to 20,000 Volts ±5%Display Monitor: LCD 128 x 64Holding Time: Greater than 5 secondsPolarity: positive, negative, alternatingIN STOCK -
3ctest DOS-CS116 Damped Sinusoidal Transients Generator for MIL-STD 461 CS116
SKU: 51636
Standards Met: MIL-STD-461 CS116Damping Rate: 15 (plus/minus 5)Oscillation Frequency: 10kHz- 100MHzRepetition Rate: single, 0.5 Hz, 1 HzSupply Voltage: 220V, 50-60 HzIn stock -
EM Test VSS 500N10 High Voltage Transient Surge Simulator
SKU: 30060
Compatible CDN's: CNV 501S4, CNV 501S4.1, CNV 503S9, CNV 503N10.1, CNV 503S11, CNV 503S12Applications: Conducted ImmunityTest Standards: IEC/EN 60065, IEC/EN 60950-1, UL 6500Surge Output Voltage: 500V to 10 kVTypically In Stock -
Teseq NSG 437 ESD Simulator for IEC 61000-4-2 and ISO 10605
SKU: 10117
Test Standards: ISO 10605, IEC 61000-4-2,ESD Voltage Output Range (Air/Contact): 30kVInterchangeable R/C Modules: YesBattery Life: NoneApplications: EV and Automotive$490.00 - $1,090.00IN STOCK -
Surge, EFT, PQF, Ring Wave Immunity System for 3 Phase, 100 Amp EUT
SKU: 12169
Standards Met: IEC/EN 61000-4-4, IEC/EN 61000-4-5, IEC/EN 61000-4-11, IEC/EN 61000-4-12 IEC/EN 61000-4-29Applications: Electrical Transient and Noise, Surge Immunity, Power FailuresMax EUT Voltage: 480 VAC and 1,000 VDCMax EUT Current: 100 Amps (Per Phase)Peak inrush current capability: 500 AmpsRENTAL ONLY