Standards

Standards Test Equipment, Systems & Solutions

• 

  EMI-AK40G Antenna Kit for EMI Radiated Emissions & Immunity Testing

  SKU: 12112

  Frequency Range: 20 Hz to 40 GHz

  Includes: Log, Biconical, Monopole, Passive Loop, Dual Ridge, Quad Ridge, Current Probes

  Test Standards: FCC Part 15, MIL-STD-461, IEC 61000-6-3, IEC 61000-6-4

  Applications: EMC Precompliance Testing, Radiated Emissions, TEMPEST Testing

  In Stock

  VIEW PRODUCT Cart

• 

  AE Techron CIS-25 Aviation Conducted/Induced Susceptibility Test Kit

  SKU: 45223

  Applications: Military EMC Testing, Aerospace, Aircraft And Aviation EMC Testing

  Test Standards: Airbus ABD0100.1.8, Boeing-D6-36440E, DO160 Section 18, DO160G Section 19, MIL STD 461 CS101, MIL STD 1275E, IEC 61000 4-19

  Output Current: 0A to 25A continuous

  Bandwidth: Full Signal: DC to 300 kHz; Small Signal: 3Vp-p to 1 MHz

  Output Voltage Range: –80V to +80V

  Typically In Stock

  VIEW PRODUCT Cart

• 

  3cTest SEPN 38100T Surge/EFT 3 Phase Coupling Network

  SKU: 7271

  EUT Load Capacity (AC): 380V, 100 A, 50 Hz/60 Hz three-phase-five-wire

  EUT Load Capacity (DC): 450 V, 100 A

  Fuse: 6 A

  Max Power Consumption: 200 W

  Dimensions: 600 x 800 x 1830 mm (W x D x H) 23.6 x 31.5 x 72 in

  Weight: 288 kg / 635 lbs

  Standards Met: IEC 61000-4-4, IEC 61000-4-5

  Applications: Conducted Immunity

  In Stock

  VIEW PRODUCT Cart

• 

  HCP-Auto Copper ESD Field Coupling Device

  SKU: 5873-1

  Dimensions of Field Coupling Plane: 170 mm × 360 mm

  Material: Copper, 1 mm thick

  Dimensions of Field Coupling Strip: 40 mm wide

  Discharge Island: φ 80 mm

  Non-Conductive Module: εr <2.5, 50 mm height

  Weight: 1.6 kg / ~3.5 pounds

  Standards Met: ISO 10605

  Applications: Electrostatic Discharge Immunity Test

  Cost New:

  Was:

  Price Now:

  $295.00 - $2,195.00

  In Stock

  ORDERING OPTIONS

• 

  Elektro-Automatik PS 11500-30 Programmable High Efficiency DC Power Supply 1500 V

  SKU: 7287

  Voltage range: 0-1500 V

  Current Range: 0 -30 A

  Resistance Range: 1.7 Ω - 3000 Ω

  Output Capacitance: 60 µF

  Frequency Range: 45 - 65 Hz

  Height: 3U (5.25 inches)

  Applications: Conducted Immunity

  Test Standards: IEC-61000-4-29

  Cost New:

  Was:

  Price Now:

  $1,400.00 - $14,000.00

  In Stock

  ORDERING OPTIONS

• 

  3ctest RSG Ripple Generator for EV EMC Testing

  SKU: 10113

  Test Standards: ISO 7637-4, ISO 21498-2 and VW 80300

  Requires: TPT-7637-4C100B

  Applications: EV EMC testing on HV Lines

  Frequency Range: 10 Hz - 300 kHz

  Frequency step: 0.01 Hz

  Open circuit output voltage: 80 Vp-p Max

  Ripple Dwell Time: 2s - 999 s, resolution 0.1 s

  Primary Current Coupling: 32 Amps

  Secondary Current Coupling: 100 Amps

  Umax: 2.5 Volts to 25 Volts

  In Stock

  VIEW PRODUCT Cart

• 

  Hioki 3470-02 Magnetic Field Meter, 10 Hz - 400 kHz

  SKU: 12076

  Frequency Range: 10 Hz - 400 kHz

  Compliance Standards: IEC62233 and EN 50366

  Magnetic Measurement Units: Select T (Tesla), G (Gauss) or A/m

  EMC Standards: EN/IEC 61000-4-8

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  Amplifier Research FL8018 Isotropic Field Probe, CW and Pulse, 18 GHz

  SKU: 11018

  Frequency Range: 20 MHz - 18 GHz

  Measurement Type: CW, AM & Pulse

  Field Strength Range: 2 – 1000 V/m

  Dynamic Range: >54 dB

  Isotropic Deviation (Measured at Ortho Angle): ±0.5 dB @ 100 MHz

  Applications: Automotive EMC, Commercial EMC, Aviation EMC, Military EMC, Wireless R&D

  Standards Met: MIL-STD 461 RS103, DO-160

  Additional Standards Met: IEC 61000-4-3

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  Rent Keysight N9048B CISPR 16 EMI Receiver

  SKU: 22153

  Frequency Range: 1 Hz to 26.5 GHz

  Standards Met: CISPR 16-1-1, ANSI C63.2, FCC

  Calibration: Accredited ISO 17025

  Options: See "Installed Options"

  Applications: Conducted Emissions, Radiated Emissions,

  Technical Note: Differences Between EMI Test Receivers and Spectrum Analyzers

  IN STOCK

  VIEW PRODUCT Cart

• 

  MIL-STD-461 CS101 Test Equipment Setup Rental Package

  SKU: 22047

  Test Standards: MIL-STD-461 CS101

  Applications: Conducted immunity and susceptibility, EMC precertification testing

  Frequency Range: 30 Hz to 150 kHz (Extendable down to 2 Hz and up to 500 kHz)

  Test Setup: Quick Start Guide Provided

  Shipping: Same Day, Larger Systems go Freight

  Cost New:

  Was:

  Price Now:

  $975.00 - $1,975.00

  Usually ships in 24 hours.

  ORDERING OPTIONS

• 

  Lumiloop LSProbe 1.2 Laser Powered Field Probe for CW and Pulse Testing

  SKU: 7384

  Application/Test Type: Radiated Immunity

  Field Strength Range: 0.1 V/m to 1,000 V/m (7 to 10 kV/m under 30 MHz)

  Frequency Range: 10 Hz to 8.2 GHz

  Resolution: <0.01 V/m

  Test Standards: MIL-461 RS103, IEC/EN 61000-4-3, ISO 11452-2, DO-160 Section 20

  Typically In Stock

  VIEW PRODUCT Cart

• 

  AD-CISPR16-1-4 Ferrite Clamp for Radiated Disturbance Measurements

  SKU: 11225

  Standards Met: CISPR 16-1-4

  Frequency Range: 30 MHz to 1 GHz

  Diameter: 1.25"

  Applications: Decoupling and noise suppression, Electromagnetic absorption clamp

  Cost New:

  Was:

  Price Now:

  $3,095.00 - $3,950.00

  IN STOCK

  ORDERING OPTIONS