Categories
Test Equipment, Systems & Solutions
-
Teseq LNA 6018 Low Noise Amplifier 1 GHz to 18 GHz
SKU: sku-83
Weight: 220 grams (0.3 Lbs)Application/Test Type: Significantly increase the sensitivity of virtually all spectrum analyzers and other RF measuring instrumentsConnector: IN: SMA female 50 Ohms; OUT: SMA male 50 OhmsDimensions: 39 mm x 88 mm x 36 mmFrequency Range: 1 GHz - 18 GHzGain: 22 dB typical (± 3 dB flatness)Input: less than -10 dBmVSWR: less than 2:1 typical -
Teseq LNA 6901 Low Noise Amplifier 9 kHz to 1 GHz
SKU: sku-82
Weight: .27 Lb's (127 grams)Application/Test Type: Increase the sensitivity of virtually all spectrum analyzers and other RF measuring instrumentsConnector: N-type 50 OhmsDimensions: 28 mm x 95 mm x 27 mmFrequency Range: 9 kHz to 1 GHz (nominal range); 9 kHz to 2 GHz (utilizable range)Gain: 28 dB typical (±1 dB flatness)Input: -20 dBm (87 dBμV)Maximum Continuous Power: +8 dBm @ 1 dB compressionVSWR: Less Than 1.5:1 -
Teseq LNA 6900 Low Noise Amplifier 9 kHz to 2 GHz
SKU: sku-81
Weight: 0.27 Lb's (127 grams)Connector: N-type 50 OhmsDimensions: 28 mm x 95 mm x 27 mmFrequency Range: 1 MHz to 3 GHz (nominal range); 200 kHz to 4 GHz (utilizable range)Gain: 12.5 dB (±0.3 dB flatness)Input: 0 dBm (107 dBμV)Maximum Continuous Power: Greater than 12.5 dBm @ 1 dB compressionVSWR: less than 1.5:1 -
INQUIRE -
Teseq NSG 3060 Surge/EFT Generator
SKU: 1166
Test Capabilities: Combination Wave Surge Immunity, EFT/Burst, Dips Interrupts & VariationsStandards Met: IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-11, IEC/EN 61000-4-29Applications: CE Marking, Medical Devices, Industrial Machinery, Electronics & ITEFT/Burst Pulse Output Capability: ±200 V to 4.8 kV (in 1 V steps)Combination/Wave Surge Output Capability: ± 200 V to 6.6 kV (in 1 V steps)External Coupling: Built-in CDN Specs reference CDN 3061 (INCLUDED), Optional - Data Lines (EFT & Surge), 3PH EUTDips & Interrupts: 0, 40, 70, 80% (INA 650x)IN STOCK -
-
PMM L3-500 500 Amp, 9 kHz - 30 MHz Line Impedance Stabilization Network (LISN)
SKU: sku-62
Weight: 248 kg (546 pounds)Application/Test Type: LISN for AC Three phase plus neutral V-Network power circuitsCurrent Rating: 300 Amps continuous (500 Amps for 20 minutes)Dimensions: 555 x 930 x 830 mm (21 x 36.6 x 32.6 inches)Frequency Range: 9 kHz to 30 MHzInductors: 50 Ω // [5 Ω + 50 µH] with 250 µH Choke or BypassInput: 230 V - 50/60 Hz, 50 VA each lineMains & EUT Connections: M14 boltsRF Connector: BNC (f)RF Input Voltage: BNC (f)Standards Met: CISPR 16-1-2; VDE 0876; FCC part 15; MIL-STD 461F -
$3,025.00 -
-
-
Com-Power CDN-M225E Coupling Decoupling Network for Unscreened Power Supply Lines
SKU: sku-54
Weight: 5 lbs. 2.3 kgApplication/Test Type: two conductor power cableCommon Mode Impedance: 150 kHz - 26 MHz: 150Ω ± 20Ω 26 MHz - 80 MHz: 150Ω + 60Ω / – 45Ω 80 MHz - 230 MHz: 150Ω + 60Ω / – 60ΩCurrent Rating: 25 Amps AC / 17 Amps DC (Max)Decoupling of Common Mode Disturbance: ≥ 40dB (EUT/AE)Dimensions: 6 x 6 x 13 inches 15.2 x 15.2 x 33 cmFrequency Range: 150 kHz to 230 MHzMains & EUT Connections: 4 mm shrouded banana socketsRF Connector: 50 Ω BNC (Female)RF Input Voltage: 40 V (Max)Standards Met: IEC / EN 61000-4-6Voltage Division Factor: 9.5 dB +4 / -1Voltage Rating: 250 V AC / 350 V DC (Line to Ground) -
