Categories
Test Equipment
-
Com-Power CDN-T8SE Sheilded/Screened with 4 Balanced Conductor Pairs for immunity testing
SKU: 8504
Weight: 2 lbs. 0.9 kgApplication/Test Type: Four screened, balanced pairsCommon Mode Impedance: 150 kHz - 26 MHz: 150Ω ± 20Ω 26 MHz - 80 MHz: 150Ω + 60Ω / – 45Ω 80 MHz - 230 MHz: 150Ω + 60Ω / – 60ΩCurrent Rating: 1.5 Amp (Max)Decoupling of Common Mode Disturbance: 150 KHz ≥ 45dB (RF/AE) 500 KHz ≥ 50dB (RF/AE) 230 MHz ≥ 50dB (RF/AE) -
Com-Power CDN-C75E Coupling Decoupling Network for Screened Cables
SKU: sku-96
Weight: 5 lbs. 2.3 kgApplication/Test Type: 75 Ohm Coaxial CablesCommon Mode Impedance: 150 kHz - 26 MHz: 150Ω ± 20Ω 26 MHz - 80 MHz: 150Ω + 60Ω / – 45Ω 80 MHz - 230 MHz: 150Ω + 60Ω / – 60ΩCurrent Rating: 1 Amp (Max)Decoupling of Common Mode Disturbance: ≥ 40dB (EUT/AE) -
Com-Power CDN-T8E Unshielded/Unscreened Cable with 4 Balanced Conductor Pairs
SKU: sku-94
Weight: 5 lbs. 2.3 kgApplication/Test Type: Four unscreened, balanced pairCommon Mode Impedance: 150 kHz - 26 MHz: 150Ω ± 20Ω 26 MHz - 80 MHz: 150Ω + 60Ω / – 45Ω 80 MHz - 230 MHz: 150Ω + 60Ω / – 60ΩCurrent Rating: 1.5 Amps (Max)Decoupling of Common Mode Disturbance: 150 KHz ≥ 45dB (RF/AE) 500 KHz ≥ 50dB (RF/AE) 230 MHz ≥ 50dB (RF/AE) -
Com-Power CDN-M425E 3-Phase + Earth Coupling Decoupling Network
SKU: sku-90
Weight: 5 lbs. 2.3 kgApplication/Test Type: Four conductor power cableCommon Mode Impedance: 150 kHz - 26 MHz: 150Ω ± 20Ω 26 MHz - 80 MHz: 150Ω + 60Ω / – 45Ω 80 MHz - 230 MHz: 150Ω + 60Ω / – 60ΩCurrent Rating: 25 Amps AC / 17 Amps DC (Max)Decoupling of Common Mode Disturbance: ≥ 40dB (EUT/AE) -
Com-Power CDN-M325E 150 kHz - 230 MHz 3-Line RF Coupling Decoupling Network
SKU: 4845
EMC Standard: IEC/EN 61000-4-6Application/Test Type: Three conductor power cableAssociated Equipment: RF Conducted Immunity Test SystemsCurrent Rating: 25 Amps AC / 17 Amps DC (Max)Decoupling of Common Mode Disturbance: ≥ 40dB (EUT/AE)Typically In Stock -
Teseq CDNE M310 Coupling/Decoupling Network for Emission Measurement, 10 A, 30 to 300 MHz
SKU: sku-87
Weight: 700 grams (1.5 LB.'s)Application/Test Type: Emission measurement (CDNE) to measure disturbance voltages in the 30 to 300 MHz frequency rangeCommon Mode Impedance: Common mode impedance (EUT port): 150 Ω +10/-20 ΩCurrent Rating: 10 AmpsDecoupling of Common Mode Disturbance: Greater than 30 dB -
Teseq CDN M216 1kV CDN for CISPR 16-1-2, CISPR 16-2-1 and CISPR 15
SKU: sku-86
Weight: 700 grams (1.5 LB.'s)Application/Test Type: Emission measurement (CDNE) to measure disturbance voltages in the 30 to 300 MHz frequency range.Common Mode Impedance: 150 Ω +10/-20 ΩCurrent Rating: 10 Amps MaximumDecoupling of Common Mode Disturbance: Greater than 30 dB -
Teseq LNA 6018 Low Noise Amplifier 1 GHz to 18 GHz
SKU: sku-83
Weight: 220 grams (0.3 Lbs)Application/Test Type: Significantly increase the sensitivity of virtually all spectrum analyzers and other RF measuring instrumentsConnector: IN: SMA female 50 Ohms; OUT: SMA male 50 OhmsDimensions: 39 mm x 88 mm x 36 mmFrequency Range: 1 GHz - 18 GHz -
Teseq LNA 6901 Low Noise Amplifier 9 kHz to 1 GHz
SKU: sku-82
Weight: .27 Lb's (127 grams)Application/Test Type: Increase the sensitivity of virtually all spectrum analyzers and other RF measuring instrumentsConnector: N-type 50 OhmsDimensions: 28 mm x 95 mm x 27 mmFrequency Range: 9 kHz to 1 GHz (nominal range); 9 kHz to 2 GHz (utilizable range) -
Teseq LNA 6900 Low Noise Amplifier 9 kHz to 2 GHz
SKU: sku-81
Weight: 0.27 Lb's (127 grams)Connector: N-type 50 OhmsDimensions: 28 mm x 95 mm x 27 mmFrequency Range: 1 MHz to 3 GHz (nominal range); 200 kHz to 4 GHz (utilizable range)Gain: 12.5 dB (±0.3 dB flatness) -
PMM L3-500 500 Amp, 9 kHz - 30 MHz Line Impedance Stabilization Network (LISN)
SKU: 10062
Weight: 248 kg (546 pounds)Application/Test Type: LISN for AC Three phase plus neutral V-Network power circuitsCurrent Rating: 300 Amps continuous (500 Amps for 20 minutes)Dimensions: 555 x 930 x 830 mm (21 x 36.6 x 32.6 inches)Frequency Range: 9 kHz to 30 MHz -
$3,025.00