Categories
Test Equipment, Systems & Solutions
-
Keysight N5222B Microwave Network Analyzer
SKU: 15411
Frequency Range: 10 MHz - 26.5 GHzConnector: 3.5 mm (f)Applications: S-Parameter Measurements, Component Characterization, Gain Compression Measurements and MorePorts: 2 Port$1,695.00 - $3,795.00In Stock -
3ctest CST 1075D Pulsed Sinusoidal Disturbances Generator
SKU: 11412
Frequency Range: 1 μHz-35 MHzStandards Met: ISO 7637-4Applications: Automotive EV EMCInput Interface: N (female)Frequency Resolution: 1 μHzInternal Modulation: AM, FM, Phase, Sinusoidal wave, Rectangular wave, triangular wave/sawtooth waveTypically In Stock -
3ctest RSG Ripple Generator for EV EMC Testing
SKU: 10113
Test Standards: ISO 7637-4, ISO 21498-2 and VW 80300Requires: TPT-7637-4C100BApplications: EV EMC testing on HV LinesFrequency Range: 10 Hz - 300 kHzFrequency step: 0.01 HzOpen circuit output voltage: 80 Vp-p MaxRipple Dwell Time: 2s - 999 s, resolution 0.1 sPrimary Current Coupling: 32 AmpsSecondary Current Coupling: 100 AmpsUmax: 2.5 Volts to 25 VoltsIn Stock -
RFCP400M10k Current Probe
SKU: 8189
Frequency Range: 10 kHz to 400 MHzMaximum RMS: Current 4 ATest Standards: MIL-STD CS114, CS115, CS116Hole Diameter: 2.0 inches [50.8 mm]Weight: 2.2 lbs [1.0 kg]Nominal Transfer Impedance: -6 dBΩMaximum Peak Current: 15 A$295.00 - $4,750.00Typically In Stock -
The EMC Shop SS400M-75 RF Power Amplifier, 10 kHz - 400 MHz
SKU: 12298
Max Frequency: 400 MHzMin Frequency: 9 kHzOutput Power: 75 WattsApplications: RF Conducted Immunity, Military and Aerospace EMC TestingStandards: ISO 11452-4, DO-160 Section 20, MIL-STD-461 CS 114Gain: 48 dBAC Input Power: 100-220V/1PHCooling: Forced Air$975.00 - $14,750.00IN STOCK -
ECO2G 2 GHz EMC Calibration Oscilloscope ESD Gun Verification
SKU: 5501
Sample Rate: 5 GSa/s (10 GSa/s ESR) ADC per analog channelRecord Length: up to 500 MptsWaveform Capture Rate: Up to 750,000 wfm/s (Sequence mode)Pre-Programmed Settings: IEC 61000-4-2 150pF/330 Ohm, All four R/C Combinations of ISO 10605Vertical Scales: 0.5 mV/div to 10 V/divInterfaces: USB Hosts, USB Device (USBTMC), LAN（VXI-11/Telnet/Socket, micro SD card, Pass/Fail, Trigger Out, HDMIProtocol Capabilities: Serial bus triggering and decoder - I2C, SPI, UART, CAN, LIN, CAN FD, FlexRay, I2S, MIL-STD-1553B, SENT, and Manchester$395.00 - $10,950.00IN STOCK -
California Instruments CSW5550 Programmable Power Source
SKU: 5600
Frequency Range: 16.00 - 81.91 Hz (0.01 Hz resolution), 81.0 – 819.1 Hz (0.1 Hz resolution), 820 – 5000 Hz (1 Hz resolution)Voltage Range: 0 - 312 VoltsApplications: Harmonic Waveform Generation for IEC 61000-3-X TestsPower: 5.5 kVA to 33.3 kVAVoltage: 0 to 312 VCurrent: 0 to 288 AInput Power: 220 VAC, 3-Phase$875.00 - $1,750.00In Stock -
Hioki 3470-02 Magnetic Field Meter, 10 Hz - 400 kHz
SKU: 12076
Frequency Range: 10 Hz - 400 kHzCompliance Standards: IEC62233 and EN 50366Magnetic Measurement Units: Select T (Tesla), G (Gauss) or A/mEMC Standards: EN/IEC 61000-4-8Inquire for Availability -
RESA Realtime EMC Spectrum Analyzer
SKU: 2075
Frequency Range: 9 kHz - 3.2/7.5.13.2/26.5 GHzFrequency Resolusion: 1 HzReal Time Bandwidth: 25 MHz (40 MHz Optional)Range: 0 Hz (Zero Span), 100 Hz to Max FrequencyEMI bandwidth (-6dB): 200 Hz, 9 kHz, 120 kHz, 1 MHz (in accordance to CISPR 16-1-1)Detectors: Peak, Voltage Average, Quasi-Peak (following CISPR 16-1-1)Applications: Conducted Emissions, Radiated Emissions, Spectrum Analyzers for EMCPre-programmed Test Limits: FCC Part 15, CISPR 22, MIL-STD-461In Stock -
Amplifier Research FL8018 Isotropic Field Probe, CW and Pulse, 18 GHz
SKU: 11018
Frequency Range: 20 MHz - 18 GHzMeasurement Type: CW, AM & PulseField Strength Range: 2 – 1000 V/mDynamic Range: >54 dBIsotropic Deviation (Measured at Ortho Angle): ±0.5 dB @ 100 MHzApplications: Automotive EMC, Commercial EMC, Aviation EMC, Military EMC, Wireless R&DStandards Met: MIL-STD 461 RS103, DO-160Additional Standards Met: IEC 61000-4-3Inquire for Availability -
Rent Keysight N9048B CISPR 16 EMI Receiver
SKU: 22153
Frequency Range: 1 Hz to 26.5 GHzStandards Met: CISPR 16-1-1, ANSI C63.2, FCCCalibration: Accredited ISO 17025Options: See "Installed Options"Applications: Conducted Emissions, Radiated Emissions,Technical Note: Differences Between EMI Test Receivers and Spectrum AnalyzersIN STOCK -
MIL-STD-461 CS101 Test Equipment Setup Rental Package
SKU: 22047
Test Standards: MIL-STD-461 CS101Frequency Range: 30 Hz to 150 kHz (Extendable down to 2 Hz and up to 500 kHz)Test Setup: Quick Start Guide ProvidedShipping: Same Day, Larger Systems go Freight$975.00 - $1,975.00Usually ships in 24 hours.