Test Equipment, Systems & Solutions

• 

  Amplifier Research FL8018 Isotropic Field Probe, CW and Pulse, 18 GHz

  SKU: 11018

  Frequency Range: 20 MHz - 18 GHz

  Measurement Type: CW, AM & Pulse

  Field Strength Range: 2 – 1000 V/m

  Dynamic Range: >54 dB

  Isotropic Deviation (Measured at Ortho Angle): ±0.5 dB @ 100 MHz

  Applications: Automotive EMC, Commercial EMC, Aviation EMC, Military EMC, Wireless R&D

  Standards Met: MIL-STD 461 RS103, DO-160

  Additional Standards Met: IEC 61000-4-3

  Inquire for Availability

  View Product Cart

• 

  Rent Keysight N9048B CISPR 16 EMI Receiver

  SKU: 22153

  Frequency Range: 1 Hz to 26.5 GHz

  Standards Met: CISPR 16-1-1, ANSI C63.2, FCC

  Calibration: Accredited ISO 17025

  Options: See "Installed Options"

  Applications: Conducted Emissions, Radiated Emissions,

  Technical Note: Differences Between EMI Test Receivers and Spectrum Analyzers

  IN STOCK

  View Product Cart

• 

  DC400M-500 4 Port Dual Directional Coupler 10 KHz to 400 GHz

  SKU: 11951

  Frequency Range: 0.01 MHz - 400 MHz

  Coupling Value: 40 ± 1.0 dB Max.

  Max Power Handling: 500 W CW

  Connectors: N Male, N Female (3)

  Flatness: ± 0.5 dB Max

  Cost New:

  Was:

  Price Now:

  $295.00

  Typically In Stock

  Ordering Options

• 

  Lumiloop LSProbe 1.2 Laser Powered Field Probe for CW and Pulse Testing

  SKU: 7384

  Application/Test Type: Radiated Immunity

  Field Strength Range: 0.1 V/m to 1,000 V/m (7 to 10 kV/m under 30 MHz)

  Frequency Range: 10 Hz to 8.2 GHz

  Resolution: <0.01 V/m

  Test Standards: MIL-461 RS103, IEC/EN 61000-4-3, ISO 11452-2, DO-160 Section 20

  Typically In Stock

  View Product Cart

• 

  DP7 High Voltage Probe for Surge Generator Waveform Verification

  SKU: 6533

  Bandwidth: DC - 70 MHz

  Attenuation: 1:100 and 1:1000

  Accuracy: ±2%

  Input Voltage Range: < +700V for X100, < +7000V for X1000

  Output Voltage: ≤ + 7000V

  Output Impedance: 50 Ω

  Standard Met: IEC 61000-4-5, IEC 61010-031 Category I

  Applications: Conducted Emissions, High Voltage Floating Measurements, Voltage Surge Measurement, Power Electronics System Design, Electronic Ballast Design

  Cost New:

  Was:

  Price Now:

  $185.00

  IN STOCK

  Ordering Options

• 

  ETS-Lindgren 3116C Double-Ridged Waveguide Horn, 10 - 40 GHz

  SKU: 3677

  Frequency Range: 10 GHz - 40 GHz

  Applications: Antenna Pattern Measurements, Emissions

  Test Standards: IEC 61000-4-3, ANSI C63.4

  Pattern Type: Directional

  Maximum Continuous Power: 40 W (10 GHz) to 20 W (40 GHz)

  Connectors: Type K (F) (2.92 mm)

  VSWR: 2.5:1 Maximum

  Typically in Stock

  View Product Cart

• 

  3ctest PVK Calibration Kit for ISO 7637-2 Pulses

  SKU: 4515

  Test Standards: ISO 7637

  Specs: See Overview

  Included Models: PVK 05, 1, 2, 4, 10, 20, 30, 50

  Cost New:

  Was:

  Price Now:

  $375.00

  In Stock

  Ordering Options

• 

  AD-CISPR16-1-4 Ferrite Clamp for Radiated Disturbance Measurements

  SKU: 11225

  Standards Met: CISPR 16-1-4

  Frequency Range: 30 MHz to 1 GHz

  Diameter: 1.25"

  Applications: Decoupling and noise suppression, Electromagnetic absorption clamp

  Cost New:

  Was:

  Price Now:

  $3,095.00

  IN STOCK

  Ordering Options

• 

  Pearson 101 Current Monitor for Surge Generator Output Verification

  SKU: 11067

  Weight: 23 ounces

  Aperture: See data sheet

  Connector type: BNC (UG-290A/U)

  Current time product: 2.5 Ampere-second maximum

  Dimensions: See data sheet

  Droop rate: 0.1 %/millisecond

  General Data: Technical Details

  High frequency 3dB cut-off: 4 MHz (approximate)

  I/f figure: 12 peak Amperes/Hz

  Low frequency 3dB cut-off: 0.25 Hz (approximate)

  Maximum peak current: 50000 Amperes

  Maximum rms current: 200 Amperes

  Output resistance: 50 Ohms

  Probes: Current monitoring

  Sensitivity: 0.01 Volt/Ampere +1/-0%

  Useable rise time: 100 nanoseconds

  IN STOCK

  View Product View Product

• 

  EFT-DLC-CAL Transducer Plate for Coupling Clamp Calibration

  SKU: 12781

  Connector Types: Fischer HV, SHV, BNC

  Application: EFT Waveform Verification, IEC / EN 61000-4-4 Edition 3

  Standards Met: Calibration according to IEC / EN 61000-4-4 Edition 3

  Compatible Couplers: Any

  Cost New:

  Was:

  Price Now:

  $1,475.00

  IN STOCK

• 

  GTEM 750 Transverse Electromagnetic (TEM) Waveguide

  SKU: 10685

  Frequency Range (Radiated Emissions): DC to 20 GHz

  Frequency Range (Radiated Immunity): 80 MHz to 6 GHz

  Max EUT Size: 60 cm x 60 cm x 37.5 cm

  Typical VSWR: 1:1.2

  Applications: Radiated Immunity, Radiated Emissions

  Max RF Input Power: 1,000 Watts CW or 2,500 Watts Pulsed

  Testing Standards: IEC 61000-4-3, ISO 11452-11, ANSI C63.4

  Weight: 1,000 Lbs

  Compliant To: IEC 61000-4-20, CISPR 16-1-4

  Overall Dimensions: 400 x 220 x 150cm + 70cm Trolley

  Reflection Coefficient: <-14 dB from 80 MHz to 4 GHz

  Typically In Stock

  View Product Cart

• 

  Rohde & Schwarz SMB100A RF and Microwave Signal Generator

  SKU: 8230

  Frequency Range: 9 kHz to 6 GHz

  Options: SMB-B1H, SMB-B103, SMB-K21, SMB-K22

  AC Input Voltage Range: 90 V to 264 V

  Max Input Current: 1.4 A (100 V) to 0.6 A (240 V)

  Cost New:

  Was:

  Price Now:

  $755.00

  In Stock

  Ordering Options