Test Equipment, Systems & Solutions

• 

  Agilent N5181A Analog Signal Generator

  SKU: 8183

  Frequency Range: 100 kHz - 6 GHz

  Output Power: +23 dBm output power @ 1 GHz

  Phase Noise: -121 dBc/Hz at 1 GHz and 20 kHz offset

  Modulation: AM, FM, Pulse, Phase

  Typical Configuration: 006, 012 ,099, 1E1, 1EA, 1EM, 1EQ, 1ER, 506, UK6, UNT, UNU, UNZ, 320, ALB

  Cost New:

  Was:

  Price Now:

  $39.00

  In Stock

  Ordering Options

• 

  Narda FieldMan 0 Hz to 90 GHz All-in-One Electromagnetic Field Meter

  SKU: 12955

  Frequency Range: 0 Hz/1 Hz/100 kHz to 90 GHz

  Logging Info: Temperature, Humidity, Air Preassure, Geolocation, Distance to Ground

  Electric Field Units: V/m, mW/cm2 , W/m2 , % of standard (depending on the connected probe)

  Magnetic Field Units: A/m, Tesla, Gauss, mW/cm2 , W/m2 , % of standard (depending on the connected probe)

  Compliance Standards: 2013/35/EU, IEC/EN 62311, ICNIRP 1998, ICNIRP 2010, IEC/EN 62233, GB-8702-2014, EMFV 2016

  Industry Standards: IEC / EN 62232, IEC 62577, EN 50519 g. IEC / EN 62233, IEC / EN 62822, EN 50500, IEC 62764, IEC/EN 62110, IEC/EN 60601

  Applications: Radiated Emissions, EMC Radiated Immunity in a Test Chamber

  Battery Life: 16 Hours (2-4 Hour Recharge)

  Operating Modes: Field Strenght, Aptial Agerage, Timer logging, Spectrum/FFT Analysis, Shaped Time Domain assessment, Scope

  Cost New:

  Was:

  Price Now:

  $495.00

  Typically In Stock

  Ordering Options

• 

  ESVM High Voltage Electrostatic Voltmeter for ESD Generator Voltage Verification

  SKU: ESVM

  Air Discharge Voltage: ± 1V ~ 100 kV ( ± 1% ± 2 counts )

  Voltage Resolution: 1 Volt up to 20 kV, 10 Volts Over 20 kV

  Display: 4 ½ large LCD / LED

  Standards Met: ANSI C63.16, ISO 10605, Mil-STD 461G CS118 and more...

  Input/Shunt Resistance: 100 GOhm

  Ships within 24 hours.

  View Product Cart

• 

  Amplifier Research 1000W1000G RF Amplifier 80MHz - 1000MHz, 1000 Watts CW

  SKU: sku-2173

  Max Frequency: 1 GHz

  Min Frequency: 80 MHz

  Output Power: 1000 Watts

  Applications: Radiated Immunity, Automotive, Medical, Military and Aerospace

  Standards: IEC 61000-4-3, ISO 11451-2, MIL-STD 461, DO-160

  Gain: 60dB

  AC Input Power: 200-240V/1PH/4kVA

  Cooling: Forced Air

  RENTAL ONLY

  View Product Cart

• 

  Wavecontrol SMP2 Broadband Field Strength Meter

  SKU: 7056

  Weight: 10.6 oz.

  Application/Test Type: Monitoring electric field strengths in GTEM's, Anechoic Chambers and other RF rooms for radiated immunity testing.

  Battery: NiMH rechargeable batteries 4 x AA size (Mignon), 2500 mAh

  Dimensions: 1.5 x 2.0 x 8 inches

  Frequency Range: 100 kHz - 60 GHz

  Operation Time: 20 hours (backlight off, no GPS) 12 hours (permanent backlight, no GPS) 10 hours (GPS receiver connected, no backlight)

  Recharging Time: 2 hours

  Standards Met: IEC 61000-4-3

  IN STOCK

  View Product Cart

• 

  Boonton 5008 USB Peak Power Sensor 50 MHz- 8 GHz

  SKU: 5150

  Frequency Range: 50 MHz to 8 GHz

  Dynamic Range (Average): -60 to +20 dBm

  Dynamic Range (Pulse): -50 to +20 dBm

  Rise time (fast/std): 4 ns / < 10 µs

  Single-shot Bandwidth: 35 MHz

  VSWR: 1.20 (0.05 to 6 GHz), 1.25 (6 GHz to 8 GHz)

  Applications: Radiated Immunity, RF Conducted Immunity

  In Stock

  View Product Cart

• 

  3 Phase Harmonics & Flicker Test System IEC 61000-3-11 and 3-12

  SKU: 11918

  Standards Met: IEC 61000-3-11, IEC 61000-3-12, IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-7, IEC 60601-1-2 and more

  Applications: Flicker and Harmonics Testing

  Current Handling: 32 Amps per phase

  Inquire for Availability

  View Product Cart

• 

  PA40G10M Millimeter-Wave Low Noise Amplifier

  SKU: 1888

  Max Frequency: 40 GHz

  Min Frequency: 10 MHz

  Output Power: +18 dBm (P1dB)

  Gain: 40 dB typical

  Max RF Input Power: +6 dBm @ 1 dB compression

  AC Input Power: 100/220 VAC regulated P/Soutput: 12 VDC 170 mA

  RF Connector: 2.9mm(f)

  EMC Standards: CISPR 11, CISPR 32, FCC Part 15

  Applications: EMI Precompliance Testing Emissions Measurements, CE Marking

  Cost New:

  Was:

  Price Now:

  $495.00

  IN STOCK

  Ordering Options

• 

  Amplifier Research FM7004 100 kHz - 60 GHz Electric Field Monitor

  SKU: 11913

  Display Interface: IEEE-488 Interface and RS-232 Interface

  Frequency Range: 5 kHz - 60 GHz (probe dependent)

  Input: Up to 4 independent Probes

  Operating Temperature: 0 °C - 40 °C (50 °F - 104 °F) @ 5% - 95% RH non-condensing

  Overload: Probe dependent

  Sampling Rate: 1-60 Samples/sec.

  Sensitivity: 0.4–1000 V/m and 12.0 mA/m–17 A/m

  USB Input: USB 2.0 (test and measurement class)

  Applications: Radiated Immunity Testing, Electric Field Chamber Calibration

  Typically In Stock

  View Product Cart

• 

  Haefely PIM 110 Ring Wave Generator

  SKU: 10544

  Impedance: 12, 30 & 200 Ohms

  Applications: Surge Immunity Testing

  Ring Wave: 0.5us - 100kHz (voltage & current)

  Pulse repetition: 12 per minute

  Pulse Voltage: 0.20 – 7.8kV

  Compliance Standards: IEC/EN 61000-4-12 and ANSI (IEEE) C62.41

  Test duration: 5 seconds

  Test Equipment Group: Ring Wave Generators/Simulators

  Cost New:

  Was:

  Price Now:

  $995.00

  In Stock

  Ordering Options

• 

  Lumiloop CI-250+ Electromagnetic Field Measurement Monitor

  SKU: 11914

  Frequency Range: 9 kHz - 18 GHz (probe dependent)

  Sensitivity: 0.4–1000 V/m and 12.0 mA/m–17 A/m

  Applications: Radiated Immunity Testing, Electric Field Chamber Calibration

  Typically In Stock

  View Product Cart

• 

  Rohde & Schwarz ZNB20 Vector Network Analyzer

  SKU: 8302

  Frequency Range: 100 kHz to 20 GHz

  Test Port Connector: 3.5 mm, male, ruggedized

  Impedance: 50 Ω

  Number of Test Ports: 2

  Options: ZNB-K2, ZNB-B10, ZNB20-B22, ZNB-B4

  Applications: RF Testing, VNA Calibration

  Cost New:

  Was:

  Price Now:

  $1,975.00

  Typically in Stock

  Ordering Options