Test Applications

Test Applications Test Equipment, Systems & Solutions

• 

  EM Test VCS 500 M10 10kV Combination Wave Surge Immunity Generator

  SKU: 17287

  Test Standards: IEC/EN 61000-4-5, IEC/ISO 60601-1-2

  Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5

  Application Notes: EMC Surge Immunity Test Setup, CE Marking

  Mains & EUT Connections: External Coupler Only

  Phase synchronization: asynchronous, synchronous 0 to 359º (in 1º steps)

  Polarity: pos / neg / alternate

  Pulse current (short circuit): max. 5,000A ± 10%

  Pulse repetition: 1s - 999s, depending on the voltage

  Pulse voltage (open circuit): 500V - 10,000V ± 10%

  Supply Voltage: 115/230V +10/-15%

  Test duration: 1 - 30,000 or endless

  Typically In Stock

  VIEW PRODUCT Cart

• 

  3ctest EDS 20H Hand-held 20kV Electrostatic Discharge ESD Simulator

  SKU: 3209

  Air Discharge Voltage Range: 1,000 Volts to 20,000 Volts ±5%

  Contact Discharge Voltage Range: 1,000 Volts to 20,000 Volts ±5%

  Display Monitor: LCD 128 x 64

  Holding Time: Greater than 5 seconds

  Polarity: positive, negative, alternating

  Standards Met: IEC/EN 61326, IEC/EN 61000-6-1, IEC/EN 61000-6-2

  Additional Standards Met: IEC 61000-4-2, IEC 61326

  Additional Standards Met: ISO 10605, ITU-TK.20, GB/T 17626.2

  IN STOCK

  VIEW PRODUCT Cart

• 

  Boonton 4232A 2 Channel RF Power Meter

  SKU: 30075

  Measurement Range: 10 kHz to 100 GHz

  Dynamic Range: 90 dB (sensor dependent)

  Power Measurement Range: -70 dBm to +44 dBm

  Applications: Radiated Immunity, RF Conducted Immunity

  Channels: 2

  Typically in Stock

  VIEW PRODUCT Cart

• 

  TDK EFG-03 High Power E-Field Generator 10 kHz - 100 MHz, up to 500 V/m

  SKU: 9091

  Weight: 68 kg (150 lbs.)

  Connector type: 7/16 female

  Test Standards: MIL-STD-461 RS103, DO-160

  Applications: Radiated Susceptibility

  Built in Load: Yes

  Max Radiated Field Strength: 500 V/m

  Typically In Stock

  VIEW PRODUCT Cart

• 

  EM Test LD 200N Load Dump Generator for ISO 16750-2

  SKU: 5955

  Output: +/- output Safety laboratory connectors Coupling To the battery +lineDecoupling Via diodeDUT supply Max. 80V/30A

  Freestyle Mode Micropulses: Rise time 1us 10us - 90us with 10us steps 100us - 900us with 100us steps 1ms - 10ms with 1ms steps Pulse duration 10ms - 1,200ms Int. resistor 0.5ohm - 38ohm, in steps of 0.1ohm

  Test Standards: ISO 7637-2 Pulse 5b for 12V and 24V, ISO/WD 16750 Pulse 5b, and much more

  Test Routines: Quick Start, User Defines Routines, Standards Test Routines Service

  Cost New:

  Was:

  Price Now:

  $1,690.00 - $2,290.00

  Typically In Stock

  ORDERING OPTIONS

• 

  3ctest PFS 6050A Automotive Power Failure Simulator

  SKU: 3C-PFS6050A

  Voltage Handling: 0 to 60 V

  Test Standards: LV 124, VW80000, GMW 3172, BMW GS 95003-2, Chrysler PF-9326, Cummins 14269(982022-026), DaimierChrysler DC-10842, Fiat 9.90110, Ford EMC-CS-2009.1, DaimlerChrysler PF-10541, Hyundai/Kia ES 96100-02, Hyundai ES 39110-00

  Peak current: 60A duration time 500 ms

  Applications: Automotive EMC Testing

  Cost New:

  Was:

  Price Now:

  $975.00 - $4,975.00

  In Stock

  ORDERING OPTIONS

• 

  3ctest EFT 500S Burst/EFT Simulator up to 4.8 kV w/ Single Phase CDN

  SKU: 11521

  Standards Met: IEC/EN 61000-4-4, IEC 61326, EN 61000-6-1, IEC 61850-3, EN 61000-6-2

  Applications: EFT Immunity, CE Marking, Medical Devices, Industrial Machinery, Electronics & IT

  Max EUT AC Voltage (w/ Built in CDN): 264Volts

  Max EUT AC Current (w/ Built in CDN): 16 Amps

  Max EUT DC Voltage (w/ Built in CDN): 125 Volts

  Max EUT DC Current (w/ Built in CDN): 10 Amps

  EFT/Burst Pulse Output Capability: 4.8 kV

  External Coupling: Data Lines & 3 Phase EUT

  6-8 Weeks

  VIEW PRODUCT Cart

• 

  Solar 2654-2 Lightning Transient Generator for DO-160 Section 22

  SKU: 10504

  Applications: Military & Aerospace EMC

  Capabilities: DO-160 Section 22 Level III, Single & Multiple Stroke, Multiple Burst

  Test Capabilities: Level III

  Typically In Stock

  VIEW PRODUCT Cart

• 

  Rent Teseq (Schaffner) CDN 163 3-Phase, 100 Amp EFT/Burst Coupling Network

  SKU: 5411

  EUT Supply Voltage: 690 VAC / 1000 VDC

  EUT Current (AC or DC): ≥100 A continuous 150 A for approx. 30 min

  EFT/Burst Pulse Peak Voltage: Up to 8000 V

  Terminals: Screw terminals, 50 mm² rated for 150 A

  Applications: Conducted Immunity

  Test Standards: IEC 61000-4-4

  Cost New:

  Was:

  Price Now:

  $560.00 - $5,600.00

  In Stock

  ORDERING OPTIONS

• 

  EM Test DPA 500N Power Analyzer for Harmonics & Flicker

  SKU: sku-242

  Standards Met: IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-11

  Application/Test Type: Medical Device EMC Testings

  Typically In Stock

  VIEW PRODUCT Cart

• 

  EM Test UCS 500N5 Multifunctional Generator for EFT/Burst, Surge & Power Fail

  SKU: 10240

  Test Capabilities: Surge Immunity (Combo/Ring/Telecom Waves), EFT/Burst, Dips Interrupts & Variations

  EMC Standards: IEC/EN 61000-4-4, IEC/EN 61000-4-5, IEC/EN 61000-4-11

  Applications: CE Marking, Medical Devices, Industrial Machinery, Electronics & IT

  Max EUT AC Voltage (w/ Built in CDN): 264 Volts

  Max EUT AC Current (w/ Built in CDN): 16 Amps

  Peak inrush current capability: 500 A (at 230 V)

  EFT/Burst Pulse Output Capability: ±200 V to 4.8 kV (in 1 V steps) - open circuit±100 V to 2.4 kV ±100 A to 2.2 kA

  Combination/Wave Surge Output Capability: ±200 V to 4.4 kV (in 1 V steps)

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  EM Test VSS 500N10 High Voltage Transient Surge Simulator

  SKU: 30060

  Compatible CDN's: CNV 501S4, CNV 501S4.1, CNV 503S9, CNV 503N10.1, CNV 503S11, CNV 503S12

  Applications: Conducted Immunity

  Test Standards: IEC/EN 60065, IEC/EN 60950-1, UL 6500

  Surge Output Voltage: 500V to 10 kV

  Typically In Stock

  VIEW PRODUCT Cart