Test Applications

Test Applications Test Equipment, Systems & Solutions

• 

  R&S FSW High Performance Signal Analyzers

  SKU: 16599

  Frequency Range: 2 Hz - 85 GHz

  Applications: Millimeter Wave Analysis, 5G, 6G, Transient Measurements, Radiated Emissions, EMC Precompliance Testing

  Signal Analysis Bandwidth: up to 2 GHz

  Options: B3, B2000, K60, K60C, K60H

  Condition (Scale 5-10): 9 - Like New

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  E&I A075 RF Power Amplifier 300 kHz – 35 MHz

  SKU: 8657

  Frequency Range: 300 kHz – 35 MHz

  Rated Power: 75 Watts P1dB Compression

  Gain: 50 dB nominal

  Flatness: +/- 1.5 dB

  Cooling: Forced Air

  Connectors: BNC

  Applications: Radiated Immunity

  Test Standards: IEC 61000-4-3

  In Stock

  VIEW PRODUCT Cart

• 

  E&I 1000S04 Class D/S RF Power Amplifier

  SKU: 8750

  Frequency Range: 20 kHz to 400 kHz

  Gain: 60 dB min, ±1.0 variation.

  Output Power: 1000 W (Nominal)

  RF Input Signal: AM, FM, SSB, Pulsed at 0 dBm

  Output Impedance: 50 ohms, VSWR, 2.5:1 max.

  Power Requirements: 110 – 240 VAC 50 / 60 Hz

  Cost New:

  Was:

  Price Now:

  $695.00 - $1,395.00

  In Stock

  ORDERING OPTIONS

• 

  INA 4591 250pF/500 Ohm Discharge Network for Teseq NSG 438

  SKU: 6346

  Applications: Conducted Immunity

  Standards Met: MIL-STD 883

  Capacitance: 250 pF

  Resistance: 500 Ω

  Compatible With: Teseq NSG 438

  Also Compatible With: Teseq NSG 437

  In Stock

  VIEW PRODUCT Cart

• 

  RESA13G Precompliant EMC Test Receiver

  SKU: 14387-1

  Frequency Range: 9 kHz - 13 GHz

  Frequency Resolusion: 1 Hz

  Real Time Bandwidth: 25 MHz (40 MHz Optional)

  Range: 0 Hz (Zero Span), 100 Hz to Max Frequency

  EMI bandwidth (-6dB): 200 Hz, 9 kHz, 120 kHz, 1 MHz (in accordance to CISPR16-1-1)

  App Note: Differences Between EMI Test Receivers and Spectrum Analyzers

  Limit Standards: EN550xx, GB9254, FCC Part15, User defined

  Detectors: Peak, Voltage Average, Quasi-Peak (following CISPR 16-1-1)

  EMC Compliance Standards: CISPR 16-1-1

  Testing Type: EMC Precompliance Testing,

  In Stock

  VIEW PRODUCT Cart

• 

  ALA6G Active Log Periodic Antenna

  SKU: 23630

  Applications: Radiated Emissions, Military & Aviation EMC Testing

  Test Standards: FCC Part 15, MIL-STD-461

  Frequency Range: 200 MHz - 6 GHz

  Connector: N-type (to Analyzer/Receiver)

  IN STOCK

  VIEW PRODUCT Cart

• 

  Ranger Power Master PM3000HF 3-Phase Power Quality Analyzer with Flicker and Harmonics

  SKU: 8845

  Input Voltage: 0 - 480 VAC

  Channels: 16

  Applications: Harmonics and Flicker

  Test Standards: IEC 61000-4-15, IEC 61326, IEC 61010

  Additional Test Standards: IEC 61000-3-2, IEC 61000-3-3

  Measurements: Voltage, current, power, power factor, VARs, phase angle, frequency, THD, and much more

  Number of configurations: 23 pre-programed factory configurations

  Harmonics: Odds, Evens, Triplens, Individual Harmonics and Harmonic Direction to the 15th, K Factor, % Total Harmonic Distortion to the 25th, Harmonic Value

  Cost New:

  Was:

  Price Now:

  $750.00 - $7,500.00

  In stock

  ORDERING OPTIONS

• 

  Amplifier Research LN1000A Low Noise Preamplifier 10 kHz to 1 GHz

  SKU: 8795

  Frequency Range: 10 kHz to 1 GHz

  Power Output: +11 dBm at less than 1 dB gain compression

  Input for Rated Output: –18 dBm maximum

  Gain: 30 dB minimum

  Gain Flatness: ±1.5 dB

  Connectors: BNC female

  Applications: Radiated Emissions, EMC Precompliance Testing

  Test Standards: CISPR 11, CISPR 32, FCC Part 15

  Cost New:

  Was:

  Price Now:

  $250.00 - $2,500.00

  Typically In Stock

  ORDERING OPTIONS

• 

  Amplifier Research DER2018 EMI Test Receiver

  SKU: 18326

  Frequency Range: 20 Hz to 18 GHz

  Standards Met: FCC Part 15, CISPR 22, MIL-STD-461

  Application/Test Type: Differences Between EMI Test Receivers and Spectrum Analyzers

  Cost New:

  Was:

  Price Now:

  $1,975.00 - $29,500.00

  Typically In Stock

  ORDERING OPTIONS

• 

  3ctest HNS 200 High-Voltage Noise Simulator

  SKU: 12414

  Front Panel: 5.7” color touch screen

  Power supply: AC 110 / 220 V, ±10%, 45-65 Hz

  Operating temperature: 15 ℃ - 35 ℃

  Relative temperature: 35%-85%RH (no condensation)

  Dimension: 450 ×600 ×177 mm (4U cabinet)

  Weight: Approx. 20 kg

  2-3 Months

  VIEW PRODUCT Cart

• 

  NoiseKen FNS-2002 Fast Transient Burst Simulator

  SKU: NO-FNS-2002

  Applications: EMC Precompliance Testing, CE Marking, EFT Immunity

  Standards Met: EN/IEC 61000-4-4

  Max EUT AC Voltage (W/ Built In CDN): 250 Volts

  Max EUT AC Current (W/ Built In CDN): 16 Amps

  Max EUT DC Voltage (w/ Built in CDN): 120 Volts

  Max EUT DC Current (w/ Built in CDN): 16 Amps

  External Coupling: Data Lines & 3 Phase EUT

  More Equipment: Electrical Noise/Transient Immunity

  Cost New:

  Was:

  $9,500.00

  Price Now:

  $7,500.00

  In Stock

• 

  LISN-CISPR25-200 LISN

  SKU: LISN-CISPR25-200

  Applications: Conducted Emissions, BCI Testing , Automotive EV EMC

  Test Standards: CISPR 25, MIL-STD-461, ISO 7637-2

  Max EUT DC Voltage: 1,000 Volts

  Max EUT Current: 200 Amps

  Max EUT AC Voltage (60Hz/400Hz): 700V/300V

  Inductance: 5 µH

  IN STOCK

  VIEW PRODUCT Cart