Test Type Categories
Test Type Test Equipment
-
Narda SRM-3000 Selective Radiation Meter
SKU: 5773
Frequency range: 100 kHz to 3 GHzModes: Spectrum Analysis Safety Evaluation, UMTS – P-CPICH Demodulation Time AnalysisUpper limit of measurement range (MR): -27 dBm to +23 dBm (in steps of 1 dB)Display range: From noise floor up to +26 dBmMaximum RF power: +30 dBm$495.00 - $6,975.00In Stock -
Schwarzbeck BBV 9718 D Microwave Broadband Preamplifier
SKU: 8358
Frequency Range: 1 to 18 GHzUseable Frequency Range: 500 MHz to 20 GHzGain: 30 dB +/- 5 dBRF Connectors: SMA(f) Input, N(f) OutputBattery Life: 8 Hours$4,475.00IN STOCK -
EFP60G Broadband EMF Probe
SKU: 5304
Frequency Range: 2 MHz - 60 GHzField Strength Range: 4 - 1000 V/m, 4 – 270 mW/cm2Linearity: +/- 1.5 dBApplications: RF Interference Analysis and EMF SniffingRotational Isotropicity: +/- 3 dBTypically In Stock -
Keysight (Agilent) N9010A EXA Signal Analyzer Rental, 10 Hz - 44 GHz
SKU: 2327
Frequency Range: 10 Hz - 44 GHzSweep/Test Speed: FastResolution Bandwidth: 1 Hz to 3 MHzOptions: 544 and B25Sweep/Test Speed Span: 0 Hz: 1 μs to 6000 s$1,750.00 - $5,450.00Typically In Stock -
Narda (PMM) NBM E-Field-Probe EF 1891, 3 MHz - 18 GHz
SKU: 30128
Frequency Range: 3 MHz to 18 GHzProbe Type: Electric E-FieldMeasurement Range: 0.6 to 800 V/m (CW), 0.6 to 65 V/m typ. (True RMS)Dynamic Range: 62.5 dBDirectivity: Isotropic (Tri-axial)Typically in Stock -
PA2500M Low Noise Amplifier, 1 - 2500 MHz
SKU: 18371
Weight: 1.45 lbs (2.5 lbs with Internal Battery)Applications: EMI Precompliance Testing, Emissions Measurements, CE MarkingConnector: N(f) to N(f) (Inquire for SMA or BNC)Dimensions: 4.25" x 2.31" x 6.73"Frequency Range: 1 MHz - 2500 MHz$1,395.00 - $1,695.00In Stock -
Langer EMV P1 Set Mini Burst Field Generators
SKU: 11247
Applications: Burst/EFT Testing, EMC Precompliance TestingSupply Voltage: 1.5 V / AAAGenerated E-field strength: ca. 100 kV/mPulse Frequency: single / 5 kHz$195.00 - $2,509.00Inquire for Availability -
Narda EF 0392 E-Field Probe for NBM-520, 100 kHz - 3 GHz, 1300 V/m
SKU: 1398
Frequency Range: 100 kHz to 3 GHzProbe Type: Electric E-FieldMeasurement Range: 0.8 to 1300 V/m (CW), 0.8 to 36 V/m (True RMS)Dynamic Range: 64 dBDirectivity: Isotropic (Tri-axial)In Stock -
Narda EF 5091 E-field Probe for NBM-520, 300 MHz - 50 GHz
SKU: 5091
Frequency Range: 300 MHz to 50 GHzProbe Type: Electric E-FieldMeasurement Range: 8 to 614 V/mDynamic Range: 37 dBDirectivity: Isotropic (Tri-axial)In stock -
3ctest EDS 16H Electrostatic Discharge Simulator up to 16 kV, IEC/EN 61000-4-2 Compliance
SKU: 10712
Weight: Approx 7kgAir Discharge Voltage Range: 1000V – 16,000V （±5%）Battery: at least 16 hour battery lifeContact Discharge Voltage Range: 1000V – 16,000V （±5%）Frequency Capabilities: single/0.1/0.2/0.5/1/2/5/10/20 HzTypically In Stock -
Turnkey Radiated Immunity Test System for Small Electronics
SKU: 11541
Frequency Ranges: 2 MHz - 40 GHzField Strength Levels: 200 V/mApplications: Radiated RF Immunity Testing, MedicalEMC Amplifiers: Radiated Susceptibility Power AmplifierTest Standards: IEC 61000-6-1, IEC 61000-6-2Typically in Stock -
Narda PMM COND-IS/10 RF Conductive Immunity Test System
SKU: 11334
Test Capabilities: RF Conducted ImmunityStandards Met: IEC/EN 61000-4-6Applications: CE Marking, Medical Devices, Industrial Machinery, Electronics & ITCDN Test Levels (w/ built-in amplifier): 10VrmsBCI Test Levels (w/ built-in amplifier): 3V$1,250.00 - $16,500.00Typically In Stock