Standards Categories
Standards Test Equipment, Systems & Solutions
-
RFE-10 RF/EMI Shielded Enclosure, 100 dB to 20 GHz
SKU: sku-2112
Dimensions: 10’ x 10’ x 8’H (~3.04m x 3.04m x 2.43m)Highest RF Shielding Attenuation Performance: 100 dB up to 20 GHz (40 GHz Optional)Filters: Power Filter, Single Phase - 2 x 26A, 250VAC, 480/277AC UL ListedInstallation: Self installation or services availableCall For Current Availability -
Amplifier Research 10S1G4 RF Amplifier, 700 MHz - 4.2 GHz, 10 Watts
SKU: 12103
Weight: 37 lbsDimensions: 19.8 x 6.1 x 14.8 inFlatness: ± 1.5 dBFrequency Range: 0.7–4.2GHz instantaneouslyGain: (at maximum setting) 43 dB minimum (Continuous Range) 10 dB minimumHarmonic Distortion (THD): Minus 20 dBc maximum at 15 wattsImpedance: 50 ohms, VSWR 2.0:1 maximumInput: 90-132, 180-264 VAC 50/60 Hz, single phase 210 watts maximumOutput: POWER OUTPUT @ 3dB COMPRESSION Nominal 25 watts Minimum 20 watts POWER OUTPUT @ 1dB COMPRESSION Nominal 22 watts Minimum 18 wattsRF Connector: RF Connector Type N female REMOTE INTERFACES: IEEE-488-24 pin female RS-232-9 pin Subminiature D (female) RS-232 (fiber optic)-Type ST USB 2.0-Type B Ethernet-RJ-45RF Input Voltage: 1.0 milliwatt maximum for rated outputStandards Met: CE Mark Testing$675.00 - $9,750.00 -
AE Techron 7234 Industrial Power Amplifier/Battery Simulator
SKU: 4302
AC Power Adapter: Single phase, 120 VAC, 60 Hz, 20A service; (220-240 VAC, 50-60 Hz, 10A service model available)Frequency Range: DC—300 kHz (1 watt): +1 to -2.0 dBGain: Voltage Mode: 20 volts/volt Current Mode: 5 amperes/voltImpedance: 20k ohm differentialMax input power: ±10V, balanced or unbalancedOperating Temperature: 10°C to 50°C (50°F to 122°F), maximum output Power de-rated above 30°C (86°F).Output Impedance: 5.3 mΩ in series with 0.95 µHOutput voltage: ±150 VpApplications: Radiated Immunity$595.00 - $5,950.00Typically In Stock -
AE Techron 7224 Linear Power Amplifier
SKU: 6792
Test Standards: DO 160 Section 16, 18, 19, SAE J113Frequency Range: DC - 300 kHzGain: Voltage Mode: 20 volts/volt Current Mode: 5 amperes/voltImpedance: 20k ohm differentialMax input power: ±10V, balanced or unbalancedOutput Impedance: 5.3 mΩ in series with 0.95 µHOutput voltage: ±150 VpAdditional Test Standards: ISO 16750-2, MIL-STD-461Applications: Radiated ImmunityTypically In Stock -
Teseq CDN M532 5-Line/32 Amp RF Coupling/Decoupling Network
SKU: 12093
Associated Equipment: RF Conducted Immunity Test SystemsCommon Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω; 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 ΩCurrent Rating: 32 Amps MaximumDecoupling of Common Mode Disturbance: Greater than 30 dBDimensions: 6.3 x 6.3 x 20 inches (16.0 cm x 16.0 cm x 50.0 cm)Insertion Loss: Greater than 0.1 dBMains & EUT Connections: 4 mm, safety (Optional IEC 320 16A)RF Connector: BNC, 50 ΩRF Input Voltage: Less than 30 VStandards Met: IEC 61000-4-6Voltage Division Factor: 10 dB +3 dB / -1 dBEMC Test Standard: IEC/EN 61000-4-6 -
-
Amplifier Research 30W1000 1MHz - 1 GHz RF Amplifier
SKU: sku-2090
Weight: 45 lbDimensions: 19.8 x 6.1 x 14.8 inFlatness: ±1.0 dB typical ±1.5 dB maximumFrequency Range: DC-1MHz -1000 MHz (1GHz)Gain: 30 dB minimumImpedance: 50 ohms, VSWR 2.0:1 maximumInput: 1.0 milliwatt maximumOutput: 30 watts minimumRF Connector: Type N female on front panel, Remote control: IEE-488 24 Pin female RS-232 9 pin sub D female -
Quadtech Guardian 6000 Plus Electrical Safety Analyzer
SKU: 12080
Test Standards: EN60335, EN60950, EN61010, CSA C22.2 No. 1010.1, UL3111and UL6095Electric Tests: Electrical Analyzer AC/DC Hipot, Insulation, Ground BondGround Bond Testing: up to to 30A ACProgrammable Output Voltage: up to 5KV AC and 6KV DC$3,995.00IN STOCK -
Narda 8511 Magnetic Field Meter, 300 kHz - 100 MHz
SKU: 6196
Frequency Range: 300 kHz to 100 MHzBand Coverage: 0.3 - 1.0 MHz, 1.0 - 20 MHz,20 - 80 MHz, 80 - 100 MHzMeasurement Range: 0.1 bis 100 mW/cm² E field, 0.2 bis 200 mW/cm² H fieldCondition (Scale 5-10): 7 (Good)$3,750.00In Stock -
QRHA40G 18 GHz to 40 GHz Quad Ridge Horn Antenna
SKU: 32052
Frequency Range: 18 - 40 GHzIsotropic Gain: 17 dBiPort Isolation: 30 dBMax RF Input Power: 40 WattsTypically In Stock -
ESA EMI Spectrum Analyzer for Precompliance Testing
SKU: 112048
Applications: Conducted Emissions, Radiated Emissions, Spectrum Analyzers for EMCPre-programmed Test Limits: FCC Part 15, CISPR 22, and moreMax Frequency: 1 GHz, 3 GHz or 7.5 GHzMin Frequency: 9 kHzSweep/Test Speed: SlowAmplitude Accuracy: < 0.7 dBResolution Bandwidth: 1 Hz to 3 MHz$195.00 - $995.00IN STOCK -
AE Techron 3110A Automotive & Aviation Standards Waveform Generator
SKU: 12046
Rise/Fall Times: ≥ 2 µsOutput Channels: 1AC Power: Single-phase, 120 VAC, 50/60 Hz, 2A service; 230 VAC, 50/60 HzWaveforms Supported: Sine, Ripple, DC, Triangle, Square, Rectangle, SawtoothNumber of Tests: 300,000 (expandable to 1 million)IN STOCK