Standards Categories
Standards Test Equipment, Systems & Solutions
-
LANGER P512 RF Power Injection and Measurement IEC 62132-4
SKU: 30056
High power injection: 2 W at 12 GHzRF-Measurements: Up to 12 GHzAttenuation: Less than 3 dB up to 12 GHzSWR: lower than 2Scope of delivery: P512 (RF probe), SMA-SMA 1m cable 18 GHz HS (high performance microwave cable with SMA), Power Supply UnitApplications: Radiated RF Immunity TestingTest Standards: IEC 62132-4Typically In Stock -
EM Test RCB 200N1 Test Pulse Generator Ford EMC
SKU: 30192
Test Standards: FMC1278 CI 220 RI 130, Ford EMC, and moreApplications: EMC Testing on EV Electric Vehicles Batteries & Charging Stations, Automotive Electrical DisturbancesAccessories: Test Fixture per Ford FMC 1278 RI 130, RI 150$395.00 - $795.00In Stock -
FCC-LISN-50-50-4-02 Line Impedance Stabilization Network
SKU: 12364-1
EUT Current Handling: 32 AmpsEUT Voltage Handling: 540V/260VApplications: CE Marking, Medical Devices, Industrial Machinery, Electronics & ITServices Available: ISO 17025 Calibration, Rentals, Leases, Purchases, Repairs, Eval/CharacterizationTest Standards: ISO 60601-1-2, FCC Part 15Additional Test Standards: CISPR 16-1-2, VDE 0876, FCC part 15, MIL-STD-461Inductance: 5 µHInquire for Availability -
Yokogawa WT1800 High Performance Power Analyzer
SKU: 12351
Input Elements: 5Max Current (per Channel): 5 AmpsMax Voltage (per Channel): 1,000 VoltsOptions: B5, G5, DTHarmonic Measurement Standards: EN/IEC 61000-3-2, EN/IEC 61000-3-12$695.00 - $2,795.00IN STOCK -
PMACISPR25 Passive Monopole Antenna DC - 300 MHz
SKU: 30097
Applications: Shielding Effectiveness MeasurementsPower Handling: 2,000 WattsFrequency Range: DC - 300 MHzEMC Standards: CISPR 25, CISPR 16-1-6Pattern Type: OmnidirectionalPolarization: LinearBase Plate Dimensions: 300 x 300 mm / 11.8 in x 11.8 inRod Length: 0.5m / 500 mm / 19.5 in.Typically In Stock -
EM Test AIF 503N32.1 3-Phase Flicker Impedance Network
SKU: sku-1917
Standards Met: IEC 61000-3-11, IEC 61000-3-12, IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-7 and moreApplication/Test Type: Medical Device EMC TestingBuilt-in Power Analyzer: EM Test DPA 503NCurrent Handling: 32 Amps per phaseRENTAL ONLY -
Schwarzbeck HWRD750 7.5 - 18 GHz, High Gain Horn Antenna
SKU: sku-1791
Frequency Range: 7.5 GHz - 18 GHzApplications: Antenna Pattern Measurements, EmissionsTest Standards: IEC 61000-4-3Gain: 21 dBiConnector: SMA Female - WRD750D24 -
Schwarzbeck LFPA 9733 Power Amplifier 5Hz - 1MHz
SKU: 30019
Frequency Range: 5 Hz – 1 MHzGain (without load): 26 dB ±3 dBAC Impedance of load min: 0.25 ΩTypical input impedance: 1 kΩApplications: Radiated ImmunityInquire for Availability -
Teseq (Schaffner) NSG 2050 System PNW 2050 w/ CDN 131/133
SKU: 11050
Standards Met: IEC/EN 61000-4-5, IEC/ISO 60601-1-2Applications: EMC Surge, CE Marking, Surge ImmunityMax EUT AC Voltage (W/ Built In CDN): 690 VoltsMax EUT AC Current (W/ Built In CDN): 32 AmpsMax EUT DC Voltage (W/ Built In CDN): 270 VoltsMax EUT DC Current (W/ Built In CDN): 16 AmpsCombination/Wave Surge Output Capability: 4.4 kVExternal Coupling: Data Lines (Surge), 3PH EUTWarranty: 100 DaysCondition (5-10 Scale): 8Equipment Group: Combination Wave GeneratorsTest Setup: Surge Immunity Test, Setup, Equipment$5,975.001 System Left -
Fischer FCC F-120-6A BCI Injection Test Probe
SKU: 11811
Aperture: 40 mmConnector type: Type-NTest Standards: ISO 11452-4, IEC 61000-4-6 BCI, DO-160 Section 20, MIL-STD-461 CS114Frequency Range: 10 kHz – 400 MHzInput Power: 200 wattsInsertion loss: less than 7dB/700kHz - 200MHzRated Power: 100 CWApplications: EMC BCI Tests, Military EMC TestingInquire for Availability -
Thermo Keytek E510A 10kV Surge Generator
SKU: 10799
Standards Met: ANSI/IEEE C62.41 Cat. B and IEC 61000 4-5Phase synchronization: ±15° with optional coupler/decouplerPulse current (short circuit): 8/20µs, 0-5.05kA with 2 ohm effective source impedance, ±10%Pulse repetition: 1 shot/18 secondsPulse voltage (open circuit): 1.2/50µs, 0-10.1kV ±10% in 1 volt stepsRepetition time: Adjustable from 300ms to 5s; 1ms resolutionTypically In Stock -
EM Test ACC Capacitive Coupling Clamp for ISO 7637 Automotive Testing
SKU: sku-635
Weight: 11.5 kgApplication/Test Type: Electrical Fast Transients for automotive applicationsCable Diameter: up to 40 mm (1.57 in)Coupling Length: 1 m (39.4 in)Dimensions: 1250 mm x 300 mm x 93 mm, L x W x HRF Connector: High voltage connector,coaxial. GND connection 4 mm plug, bananaStandards Met: ISO 7637Voltage Rating: up to 1.0 kVInquire for availability