CISPR 22 Categories
CISPR 22 Test Equipment, Systems & Solutions
-
Conducted Emissions Test Setup
SKU: 7077
Applications: Conducted emissions testing on power and data lines, CE MarkingTest Standards: IEC 61000-4-7, IEC 61000-4-30, IEC-61000-4-19, CISPR 11, CISPR 25, CISPR 32, FCC Part 15, MIL-STD 461, ANSI C63.4, DO-160 and moreMeasurement Range: 1 kHz - 1 GHz (150 kHz - 30 MHz typical)Power Handling: up to 1,000 Volts and 1,000 AmpsOEM Measurement Receivers Available: Rohde & Schwarz, Keysight, Siglent, Rigol, PMM, Amplifier Research, FrankoniaOEM LISN's Available: Schwarzbeck, FCC, Com-Power, Solar Electronics, PMM, Tekbox, Agilent/HPGeneric Standards: IEC 61000-6-3, IEC 61000-6-4$590.00In Stock -
Typically In S -
ISN30M Impedance Stabilization Network for CAT-6 Cable
SKU: 8455
Test Standards: CISPR 24, CISPR 32, CISPR 16-1-2 Annex ECable Type: Cat 6 (Cat 3 and Cat 5 with add-on module)Data Speed: 10GBASE-TCompliant to: CISPR 22, Appendix D, Fig. D.3$219.00In Stock -
RFT-09 Faraday Tent for Radiated Emissions Testing
SKU: sku-2266
Attenuation: 90 dB typicalFrequency Range: (150 kHz) 30 MHz - 18 GHzApplications: Radiated Emissions and Radiated Immunity PrecomplianceStandard Options: Lights and VentEnclosure Size: 9ft x 9ft 6.5ftFrame Size: 10ft x 10ft x 9.5ftDoor Size: 70in x 40inFrame Type: Portable and Heavy DutyFeedthroughs: 120 VAC, N(f), BNC(f), SMA(f), Sleeve -
RFT-07 EMI Tent for Radiated Emissions Testing
SKU: 8459
Attenuation: 90 dB typicalFrequency Range: (150 kHz) 30 MHz - 18 GHzStandard Options: Lights and VentEnclosure Size: 7ft x 7ft 6.5ftFrame Size: 8ft x 8ft x 8ftDoor Size: 5ft x 5ftFrame Type: Portable and Heavy DutyFeedthroughs: 120 VAC, N(f), BNC(f), SMA(f), SleeveApplications: EMC Precompliance Testing, Radiated EmissionsIN STOCK -
AH Systems SAS-521-4 Bilog Antenna, 25 MHz - 4 GHz
SKU: 11920
Antenna Factor (1 Meter): 7 to 30 dB/mAntennas: Bilogical AntennasApplication/Test Type: RF EMC immunity testing, Radiated Emissions Testing, Improved high frequency gainConnector: N type femaleDimensions: 22.2 in. (56.4 cm) x 38.5 in (97.8 cm) x 39 in (99.1 cm)Frequency Range: 25 MHz - 2000 MHzGain: -28 to 7 dBiImpedance-2: 50 OhmsMaximum Continuous Power: 1000 WattsStandards Met: CISPR 11, CISPR 16-1-4, IEC 61000-4-3Inquire for Availability -
Teseq CVP 2200A Capacitive Voltage Probe
SKU: sku-139
Frequency Range: 150 kHz to 30 MHzRF Connector: BNC 50 Ω, female -
Teseq ISN ST08C Impedance Stabilization Network for Shielded Balanced Pairs
SKU: sku-170
Frequency Range: 150 kHz to 230 MHzImpedance: 150 Ω ±20 ΩRF Input Voltage: 20 V -
Teseq ISN T800S Impedance Stabilization Network per CISPR 22/32 Figure D.3/G.3
SKU: sku-861
Weight: 1.2 lbs. (0.55 kg)Connectors: 105 x 65 x 110 mmCurrent Rating: 600 mA (per line), 1.2 Amps (per pair)Dimensions: see photo in imagesFrequency Range: 150 kHz to 30 MHzIsolation: Cat 3 - 150 kHz to 30 MHz: 39.3 to 55 dB Cat 5 - 150 kHz to 2 MHz: 65 dB Cat 5 - 2 MHz to 30 MHz:: 49.3 dB to 65 dBMains & EUT Connections: RJ11 and RJ45RF Connector: 50Ω N-type (female)Standards Met: CISPR 16-1-2, CISPR 22/32Voltage Rating: 63 VAC 100 VDC -
Com-Power ISN-T8 Impedance Stabilization Network 150 kHz to 30 MHz
SKU: sku-395
Weight: 1.4 lbs. (0.6 kg) [ISN + LCL Adapter + Connecting Adapter]Current Rating: 800 mA (per line), 1.6 Amps (per pair)Dimensions: see photo in imagesFrequency Range: 150 kHz to 30 MHzIsolation: 150 kHz to 1.5 MHz: 35 to 55 dB 1.5 MHz to 30 MHz: 55 dBMains & EUT Connections: D-sub 25 pin female connectorsRF Connector: 50Ω N-type (female)Standards Met: ISPR 16-1-2, CISPR 22/32Voltage Rating: 50 VDC / 32 VAC (line to ground @ 50/60 Hz)$295.00 -
Teseq ISN T8-Cat6 Impedance Stabilization Network (ISN) for Unscreened Balanced Pairs
SKU: sku-163
Frequency Range: 150 kHz to 80 MHzImpedance: 150 Ω ±20 ΩRF Input Voltage: 15V -
Teseq ISN S752 Impedance Stabilization Network for Coaxial Lines
SKU: sku-174
Weight: approx. 1.5 kgDimensions: (W x H x D): 100 mm x 100 mm x 240 mmFrequency Range: 150 kHz to 230 MHzImpedance: 150 Ω ±20 ΩRF Input Voltage: 20 V