Fischer FCC F-CVP-1 Overview
The Fischer Custom Communications, Inc. non-contact capacitive voltage probe (F-CVP-1) is used to measure the common mode voltage appearing between a multi-pair balanced cable bundle and the local ground reference for the cable bundle in accordance with CISPR 32. The F-CVP-1 makes this voltage measurement without requiring direct contact with the metallic conductors in the cable bundle, or requiring physically breaking the cable bundle to install the F-CVP-1.
[split]
Rentals Include
- AC Charger
- Calibration Certificate
- Manual
- Hard Carrying Case
|
Product
|
Maximum Measurable Signal
|
Battery Charger
|
Dynamic Range
|
Maximum Diameter
|
Minimum Measurable Signal
|
Nominal Gain Flatness
|
Nominal Probe Gain
|
Operating Bandwidth
|
|---|---|---|---|---|---|---|---|---|
| F-CVP-1 | ≈10 V | External, powered from 120 VAC | 80 dB minimum | of wire/cable bundle under test: 2 cm for < 5 pF nominal loading for cable/bundle under test | (At 1kHz detection bandwidth) 10 dBµV | (150 kHz – 30 MHz): +/- 0.2 dB, (9 kHz – 100 MHz): +/- 1.5 dB | - 20 dB | 9 kHz – 100 MHz |
|
Output Connector
|
Overall Dimensions (approximate)
|
Probe Power Source
|
Recharging Time (maximum)
|
|---|---|---|---|
| Type N (female) | 7.7 inches High X 5.0 inches Wide X 8.0 inches Long (19.6 cm X 12.7 cm X 20.3 cm) | Internal rechargeable NiMH or NiCad, or disposable Alkaline (10 size AA) | 14 hours |
