Categories
Test Equipment, Systems & Solutions
-
SS6G-200A 700 MHz - 6 GHz, 200 Watt P1dB Solid State RF Amplifier
SKU: 6284
Frequency Range: 700 MHz - 6 GHzGain: 55 dB minimumInput: 180 - 240 VAC, 2500 wattsOutput: POWER OUTPUT @ 1dB COMPRESSION : Typical: 200 watts minimum, 225 watts typicalImpedance: 50 ohmsFlatness: ±2.0 dB MaxRF Connector: N (f)In STOCK -
Amplifier Research 25A250B RF Power Amplifier
SKU: 5167
Frequency range: 10 kHz - 250 MHzPower Output: ~25 watts P1dBApplications: Conducted Immunity Testing, EMC on Medical Devices, CE Marking$570.00In stock -
ETS-Lindgren 3115 Double-Ridged EMC Horn Antenna
SKU: sku-1171
Frequency Range: 750 MHz - 18 GHzMax RF Power In: 300 Watts (500W Peak)Applications: Radiated Susceptibility, Radiated Emissions MeasurementsTest Standards: IEC 61000-4-3, MIL-STD 461, ANSI C63.4, EN 55022, FCC Part 15Inquire for Availability -
3ctest PFS Single Phase Power Fail Simulator
SKU: sku-1108
Test Standards: IEC/EN 61000-4-11, IEC/EN 61000-4-29Applications: EMC Precompliance Testing, Conducted ImmunityEUT Power Handling: up to 260 Volts and 20 Amps (3 Phase models available)Rentals: Ship Same Day4-6 Weeks -
Turnkey Radiated Immunity Test System for IEC 61000-4-3
SKU: 11541
Frequency Range: 80 MHz - 6 GHzField Strength Levels: 30 V/m at 3 Meters (Typically)Applications: Radiated RF Immunity Testing, MedicalLooking to Upgrade?: RF Power Amplifier RentalsTest Standards: IEC 61000-6-1, IEC 61000-6-2Configurable in 1-2 Weeks -
Rent ETS-Lindgren (EMCO) 7405 E & H Near Field Probe Set
SKU: 7347
Specifications: See descriptionApplication: Conducted Emissions$250.00In stock -
Com-Power PAM-103 1 MHz - 1 GHz Preamplifier
SKU: 10215
Weight: 3.3 lbs. (1.5 kg)Application/Test Type: Increases system sensitivity enhancing the capability of measurement system to measure low level signals for EMI / EMC MeasurementsConnector: 50Ω N-Type (f)Dimensions: 7.5 x 5 x 3 inchesFrequency Range: 1 MHz - 1000 MHzGain: 33 dB typical (± 3 dB flatness)Input: 12 VDC, 0.7 A NimH (2 x 6 V NimH Battery packs)Maximum Continuous Power: +4 dBm @ 1 dB compressionVSWR: 1.3:1Inquire for Availability -
Teseq MD 4070 Monitoring Device 10 kHz to 400 (600) MHz
SKU: 11169
Applications: RF Current Monitoring, EMC BCI Tests, Military EMC TestingTest Standards: DO-160 Section 20, MIL-STD-461Top Frequency Range: 400 MHzBottom Frequency Range: 4 kHzRF Current Handling (CW/Pulse): 1 AmpStyle: Clamp OnDiameter: 1"Transfer Impedance: 0.5 to 5 OhmsTest Standards: ISO 11452-4, IEC 61000-4-6 BCI, DO-160 Section 20, MIL-STD-461 CS114$195.00Typically In Stock -
Narda PMM 7010 EMI Test Receiver
SKU: 10025
Frequency Range: 9 kHz to 3 GHzApp Note: Differences Between EMI Test Receivers and Spectrum Analyzers, Precompliance conducted emissions,Detectors: Peak, Quasi-Peak, Average, RMS, RMS-Avg (optional), C-Avg, Smart Detector functionPre-programmed Test Limits: CISPR 11, CISPR 22Sweep/Test Speed: SlowOther Features: Built-in LISN (1PH/16A)Test Standards: CISPR 16-1-1, ANSI C63.2, MIL‑STD‑461 and FCC$495.00IN STOCK -
Langer EMV HR-R 8-1 Passive Near-Field Probe
SKU: 6686
Frequency: 40 GHzOutput Resistance: 50 OhmOutput Connector: 2.92 mm (K), female, jackTest Standards: CISPR, MIL-STD-461, FCCApplications: Radiated Emissions, Conducted Emissions$595.00In Stock -
Langer EMV RF2 Near-Field Probe Set
SKU: 8121
Applications: Conducted Emissions, Radiated EmissionsFrequency Range: 30 MHz to 3 GHzConnector: SMB maleTest Standards: CISPR, MIL-STD-461, FCC$210.00In Stock -
PMM L2-16B LISN
SKU: 6763
Frequency Range: 9 kHz to 30 MHzStandards Met: FCC Part 15Continuous Rated Output Current: 16 AMaximum Permissible Operating Voltage: 250 VAC; 350 VDCEquivalent Circuit: 50 Ω // (5 Ω+ 50 μH)RF Output Connector: BNC femaleEUT connection: SCHUKO connectorApplications: Conducted Emissions, BCI Testing , Automotive EV EMC$275.00In Stock