Test Equipment, Systems & Solutions

• 

  Agilent 8449B 26.5 GHz RF Microwave Preamplifier

  SKU: 3030

  Frequency Range: 1 GHz - 26.5 GHz

  Connector: ACP - 3.5 male

  Gain: 23.5 dB (minimum)

  Gain Flatness: 1.0-26.5 GHz - ±4.5dB; 2.0-22.0 GHZ ±3.5dB

  Cost New:

  Was:

  Price Now:

  $249.00

  In Stock

  Ordering Options

• 

  Schwarzbeck HXYZ 9170 Triple Loop Antenna

  SKU: 8346

  Loop Diameter: 2 meters

  Test Standards: EN 55015, CISPR 15

  Applications: Radiated Emissions

  Current Transformer Frequency Range: 9 kHz to 100 MHz

  Cost New:

  Was:

  Price Now:

  $795.00

  Typically in Stock

  Ordering Options

• 

  Schwarzbeck TF 130-150 Test Fixture per Ford FMC 1278 RI 130, RI 150

  SKU: 2029

  Material: Polyoxymethylene (=POM), Aluminium base

  Weight: 7.3 kg

  Overall Dimensions: 1350 mm x 150 mm x 150 mm

  Connectors: N-Type (f)

  Cost New:

  Was:

  Price Now:

  $395.00

  10-12 Weeks

  Ordering Options

• 

  Schwarzbeck HS 5136 Hall Sensor

  SKU: 5711

  Test Standards: MIL STD 461

  Applications: Automotive EMC, Military EMC Testing

  Field Strength Range: 0 - 7.5kA/m

  Measurement Range (nominal): 0 - 7000 A/m (peak)

  Nominal Conversion Factor: 1 (A/m) / mV

  Load Impedance: 2 kΩ

  Cost New:

  Was:

  Price Now:

  $595.00

  Typically In Stock

  Ordering Options

• 

  Com-Power CDN-M350E 150 kHz to 230 MHz Coupling Decoupling Network

  SKU: 30077

  Application/Test Type: RF Conducted Immunity Testing

  Current Rating: 50 Amps

  Frequency Range: 150 kHz to 230 MHz

  Mains & EUT Connections: 5.2 mm banana socket with shrouded sheath

  RF Connector: 50 Ω BNC (Female)

  RF Input Voltage: 40 Volts rms (152 dBμV)

  Standards Met: IEC 61000-4-6, CISPR 16-1-2

  Voltage Division Factor: 9.5 dB

  Voltage Rating: 250 Volts AC, 350 Volts DC

  Inquire for Lead Time

  View Product Cart

• 

  Schwarzbeck NNLK 8121 100 Amp Line Impedance Stabilization Network

  SKU: 10857

  Weight: 27.5 lbs.

  Application/Test Type: Power Line Conducted Emissions Tests

  Current Rating: 100 Amperes

  Standards Met: ANSI C63.4, CISPR 16-1-2

  Frequency Range: 9 kHz - 30 MHz

  Inductors: 50 µH

  Insertion loss: less than 0.7 dB

  Isolation: more than 40 dB

  Mains & EUT Connections: Remote Interface Power Input Port 5.5/2.5 mm Power Jack

  RF Connector: RF Measurement Port 50Ω - N-Type (female)

  Voltage Rating: 500 Volts rms (line to line), 288 Volts rms (line to ground) Max DC Voltage: 705V

  Typically In Stock

  View Product Cart

• 

  EM Test NX5 Compact EMC Generator for EFT/Burst, Surge & Power Fail

  SKU: 10547

  Test Capabilities: Combination Wave Surge Immunity , EFT/Burst, Dips Interrupts & Variations

  Standards Met: IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-11

  Applications: Conducted Immunity Testing, CE Marking, Medical Devices

  Max EUT Voltage (w/ Built in CDN): 300 Volts

  Max EUT Current (w/ Built in CDN): 16 Amps

  Peak inrush current capability: 500 Amps (up to 2.5 kA)

  EFT/Burst Pulse Output Capability: 5.5 kV

  Combination/Wave Surge Output Capability: 5 kV

  External Coupling: Data Lines (EFT & Surge), 3PH EUT

  Dips, Interrupts & Variations: 16 Hz - 500 Hz and DC

  Cost New:

  Was:

  Price Now:

  $2,195.00

  Typically In Stock

  Ordering Options

• 

  Haefely ONYX 16 ESD Simulator Gun for IEC 61000-4-2

  SKU: 10536

  Air Discharge Voltage Range: 1 to 16 kV or 1 to 30 kV

  Battery: at least 16 hour battery life

  Contact Discharge Voltage Range: 1 to 16 kV or 1 to 30 kV

  Frequency Capabilities: single/0.1/0.2/0.5/1/2/5/10/20 Hz

  Holding Time: More than 5 sec

  Polarity: positive & negative

  Pre-Programmed IEC Levels: Yes

  Resolution: 100V steps

  Standards Met: IEC/EN 61000-4-2, ISO 10605

  Cost New:

  Was:

  Price Now:

  $295.00

  Ships Same Day

  Ordering Options

• 

  EMCO (ETS-Lindgren) 3810-2 LISN, NEMA, 9 kHz - 30 MHz, 10 Amps

  SKU: 11287

  Application/Test Type: Power line conducted emissions tests

  Current Rating: 10 Amps

  Dimensions: 8.7 x 15 x 6 inches / 22.2 x 38.1 x 15.2 cm

  Frequency Range: 9 kHz to 30 MHz

  Inductors: 50 µH/250µH

  Mains & EUT Connections: NEMA typical. (SCHUKO and British available upon request)

  RF Connector: 50Ω BNC Monitor

  Standards Met: FCC Part 15, VDE 0871, VDE 0875

  Voltage Rating: 250 VAC (Line to Ground)

  Cost New:

  Was:

  Price Now:

  $195.00

  In Stock

  Ordering Options

• 

  Narda PMM EP-601 10 kHz – 9.25 GHz Broadband Active Electric Field Probe

  SKU: 5271

  Application/Test Type: Monitoring Electric Field Strengths

  Field Strength Range: 0.5 to 500 V/m (0.01 V/m)

  Frequency Range: 10 kHz to 9.25 GHz

  Standards Met: IEC/EN 61000-4-3

  Interfaces: Fiber-Optic

  Battery Life: 60-80 hours

  Cost New:

  Was:

  Price Now:

  $905.00

  Inquire for Availability

  Ordering Options

• 

  Rent Agilent (HP) E7401A EMC Analyzer, 9 kHz to 1.5 GHz

  SKU: 10260

  Applications: Conducted Emissions, Radiated Emissions, Spectrum Analyzers for EMC

  Pre-programmed Test Limits: FCC Part 15, CISPR 22, MIL-STD-461

  Max Frequency: 26.5 GHz

  Min Frequency: 9 kHz

  Sweep/Test Speed: Moderate

  Amplitude Accuracy: 0.37 dB

  Resolution Bandwidth: 1 Hz to 5 MHz

  Cost New:

  Was:

  Price Now:

  $995.00

• 

  Teseq CDN HSS-2 Surge CDN for High Speed Communication Lines

  SKU: 6195

  Application/Test Type: ISDN, 10/100BaseT, 1000BaseT etc., switchable per jumper, PoE applicable; 2 kV* (1.2/50 μs pulse as per IEC/EN 61000-4-5); Max. surge test current: 50 A (8/20 μs pulse as per IEC/EN 61000-4-5)

  Current Rating: 1 A (rated for Power over Ethernet)

  Insertion Loss: 9 dB at 100 MHz

  Mains & EUT Connections: RJ45 female; HV connector female (Fischer D103A023)

  Standards Met: IEC 61000-4-5 Ed. 3

  Voltage Rating: 100 VDC between pairs

  RENTAL ONLY

  View Product View Product