Categories
-
Teseq CDN M416 4-Line Coupling/Decoupling Network
SKU: sku-225
Weight: 700 grams (1.5 LB.'s)Application/Test Type: 3 power lines, (L+N+PE), (2L+PE), (Optional L+L+L)Common Mode Impedance: 150 Ω +10/-20 ΩCurrent Rating: 10 Amps MaximumDecoupling of Common Mode Disturbance: Greater than 30 dB -
Teseq CDN M316 Coupling/Decoupling Network (CDN) CDN M3 Type
SKU: sku-224
Weight: 700 grams (1.5 LB.'s)Application/Test Type: 3 power lines, (L+N+PE), (2L+PE), (Optional L+L+L)Common Mode Impedance: 150 Ω +10/-20 ΩCurrent Rating: 10 Amps MaximumDecoupling of Common Mode Disturbance: Greater than 30 dB -
Teseq CDN M210B Coupling Network with CEE 7/17 EUT Port & IEC 60320 C14 AE Port
SKU: sku-223
Weight: 3.3 Lbs (1.5 kg)Application/Test Type: switchable 2 or 3 power lines, (L+N or L+N+PE)Common Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 ΩCurrent Rating: 10 AmpsDecoupling of Common Mode Disturbance: 150 kHz: Greater than 30 dB 1.5 MHz: Greater than 60 dB 30 MHz: Greater than 40 dB 230 MHz: Greater than 20 dB$1,020.00 -
Teseq CDN M1-10 Coupling Network 10 KHz to 80 MHz for PE Lines
SKU: sku-222
Weight: 3.3 Lbs (1.5 kg)Application/Test Type: switchable 2 or 3 power lines, (L+N or L+N+PE)Common Mode Impedance: 10 kHz to 26 MHz: 150 Ω ±20 Ω; 26 MHz to 80 MHz: 150 Ω +60 Ω / -45 ΩCurrent Rating: Current max. (no saturation): 300 mA; Current max. (1 s for PE line test): 25 ADimensions: 3.9" x 3.9" x 9.5" (100 mm x 100 mm x 240 mm)$790.00 -
Teseq CDN 3083-Surge 620 Volt, 100-200 Amp Manual Coupler
SKU: sku-220
Weight: 80 kg (176 LB's)Application/Test Type: Manual Surge Testing for EUT up to 100Amps, 620 VAC; Three phase (5 wire); Two phase (4 wire); Single phase (3 wire)Current Rating: 100 Amp or 200 Amp continous depending on modelDimensions: 850 x 520 x 345 mmMains & EUT Connections: Fischer 105 series; Screw terminals, rated for 230 A -
Com-Power PAM-118A High Gain EMC Broadband Preamplifier
SKU: 510217
Weight: 2.5 lbs (1.1 3Kg)Application/Test Type: Increases system sensitivity enhancing the capability of measurement system to measure low level signals. It also provides input isolation to your spectrum analyzer or receiver.Connector: 50Ω Precision N-type (female)Dimensions: 7.7 x 6.5 x 3.2 inches (184 x 156 x 77 mm)Frequency Range: 500 MHz - 18 GHzInquire for Availability -
Com-Power PAM-6000 High Gain EMC Preamplifier, 1 - 6 GHz
SKU: sku-216
Weight: 3.3 lbs. (1.5 kg)Application/Test Type: Increases system sensitivity enhancing the capability of measurement system to measure low level signals for EMI / EMC MeasurementsConnector: 50Ω N-Type (f)Dimensions: 7.5 x 5 x 3 inchesFrequency Range: 1 GHz - 6 GHz -
Com-Power PAM-840A Ultra Wideband Preamplifier, 18 GHz- 40 GHz, 37 dB Gain
SKU: 1110214
Weight: 2.5 lbs (1.1 3Kg)Application/Test Type: Increases system sensitivity enhancing the capability of measurement system to measure low level signals. It also provides input isolation to your spectrum analyzer or receiver.Connector: 50Ω 2.9mm femaleDimensions: 7.6 x 5.95 x 2.17 inches (192 x 151 x 55 mm)Frequency Range: 18 GHz - 40 GHzInquire for Availability -
AH Systems PAM-1840VH High Gain Broadband Preamplifier, 18 - 40 GHz
SKU: sku-213
Weight: 1.1 lbs. / 0.5 kgApplication/Test Type: Overcome attenuation problems at higher frequencies. Match to double ridge guide horn antenna.Connector: 2.9mm(f) to 2.9mm(f)Dimensions: 2.5" x 3.75" x 6.25" (63mm x 95mm x 158mm)Frequency Range: 18 GHz - 40 GHz -
AH Systems PAM-1840 High Frequency Broadband Preamplifier, 18 - 40 GHz
SKU: sku-212
Weight: 1.1 lbs. / 0.5 kgApplication/Test Type: Overcome attenuation problems at higher frequencies.Connector: 2.9mm(f) to 2.9mm(f)Dimensions: 2.5" x 3.75" x 6.25" (63mm x 95mm x 158mm)Frequency Range: 18 GHz - 40 GHz -
AH Systems PAM-1826 High Frequency Preamplifier, 18 - 26.5 GHz
SKU: sku-211
Weight: 1.1 lbs. / 0.5 kgApplication/Test Type: EMI Precompliance Testing Emissions Measurements, CE MarkingConnector: SMA(f) to SMA(f)Dimensions: 2.5" x 3.75" x 6.25" (63mm x 95mm x 158mm)Frequency Range: 18 GHz - 26.5 GHz -
AH Systems PAM-0118P Broadband Preamplifier, 20 MHz - 18 GHz
SKU: 2669
Weight: 1.1 lbs. / 0.5 kgApplication/Test Type: Improve overall system sensitivity for field measurements.Connector: N(f) to N(f)Dimensions: 2.5" x 3.75" x 6.25" (63mm x 95mm x 158mm)Frequency Range: 20 MHz - 18 GHzInquire for Availability