Categories
Test Equipment, Systems & Solutions
-
-
EM Test AMP 200N Low Frequency Signal Source DC (0Hz) to 250kHz
SKU: sku-480
Weight: Approx. 18kgAmplifiers: low-frequency signal source with amplifierDimensions: 19", 3HU (500mm x 449mm x 133mm)Frequency range: DC - 250kHzGeneral Data: Technical DetailsHarmonic Distortion (THD): less than 0.1%Operating Temperature: 10°C - 40°COutput current: Max. 5Arms up to 200kHz Max. 4Arms 200kHz - 250kHzOutput Impedance: 30 mOhm @ 1 kHzOutput voltage: 50Vrms, max. 140V(p-p) up to 100kHz 30Vrms 100kHz - 250kHzProtection: - Short circuit - OvertemperatureSignal power: 250W (nominal)Supply Voltage: 115 V +10/-02%, 50/60 Hz or 230 V +10/-15%, 50/60 Hz -
-
EM Test AutoWave for Generating and Recording Automotive Waveforms
SKU: sku-477
Weight: 6kgDimensions: 100mm x 380mm x 390mmFrequency range: DC - 50kHzGeneral Data: Technical DetailsOutput: 2 channels; 2 additional output channels can be added as an option (ExtBoard)Resolution: 16 BitSupply Voltage: AC: 90V - 250V, 47Hz - 63HzVoltage: 10V, unipolar or bipolar -
Amplifier Research (AR) FL7018 Laser Powered E-Field Probe, 3 MHz - 18 GHz
SKU: sku-278
Weight: 150 g (5.3 oz)Application/Test Type: Monitoring electric field strengths in GTEM's, Anechoic Chambers and other RF rooms for radiated immunity testing.Battery: N/ACommunication: USB, IEEE-488 (GPIB), RS-232 (serial), Fiber-Optic SerialDigital Filtering: N/ADimensions: 65 mm (2.55 in)Dynamic Range: 1 to 1,000 Volts per Meter (Single Range)Flatness: Frequency correction OFF: ±1.0 dB @ 10 MHz Frequency correction ON: typically 0.8 dB, 5 kHz–1 GHz 1.4 dB, 1 GHz–18 GHzFrequency Range: 3 MHz to 18 GHzInternal Data Memory: NoneMeasurement Mode: X-Y-Z and CompositeOperation Time: Laser Powered - SeemlessOverload: 1,600 V/m CW 16,000 V/m PeakPC Software: Optional Software for setup, automation and monitoring available.Recharging Time: N/AResolution: 0.01 V/mRF Field Probes: E-FieldSampling Rate: 20 msec/up to 50 samples per second, USB and GPIB onlySensors: Three monopolesStandards Met: IEC/EN 61000-4-3Temperature Reading Resolution: None -
Rent EM Test VDS 200N10 Automotive Battery Source and Voltage Drop Simulator, 60 V/10 A
SKU: sku-244
Common Mode Impedance: Pulses 4 and 2b (ISO 7637-2/ISO 16750-2) -
-
-
Inquire for Availability -
Teseq NSG 5500-2 Automotive Immunity Expandable Test System up to Five Transient Modules
SKU: sku-160
Applications: Automotive Electrical Disturbances, EV EMC TestingStandards Met: ISO 7637Max EUT DC Voltage (w/ Built In CDN): 60 VoltsMax EUT DC Current (w/ Built In CDN): 30 AmpsPeak Inrush Current Capability: 300 AmpsPre-Programmed Pulses: ISO 7637-2 (Pulse 1, 2a,3a/3b 6),SAE J1113, GM 3097, BMW, Volkswagen, PSA, Chrysler, DC 10614, Renault, FIAT, Mitsubishi, Honda, Ford ES-XW7T -
Frankonia CIT-10 RF Conducted Immunity Test System
SKU: FRA-CIT-10
Test Capabilities: RF Conducted ImmunityCDN Test Levels (w/ built-in amplifier): 30VrmsBCI Test Levels (w/ built-in amplifier): 200mAStandards Met: IEC/EN 61000-4-6, MIL-461 CS114, ISO 11452-4Applications: Bulk Current Injection Testing, RF Conducted Immunity$16,500.00In Stock -
AH Systems AK-18G Antenna Kit for FCC, MIL-STD, VDE and TEMPEST Testing up to 18 GHz
SKU: 7149
Applications: Radiated Immunity, Radiated EmissionsStandards Met: MIL-STD-461, VDE, TEMPEST TestingAntenna Case Dimensions: 28" x 23" x 10"Tripod Case Dimensions: 46" x 8" DiameterInquire for Availability