Categories
Test Equipment, Systems & Solutions
-
-
Rent Com-Power LI-3P-132 150kHz to 30MHz Three-Phase Line Impedance Stabilization Network
SKU: 11124
Weight: 27.5 lbs.Application/Test Type: Power Line Conducted Emissions TestsCurrent Rating: 32 AmperesDimensions: 19.3” x 13.9” x 2.3"Frequency Range: 150 kHz to 30 MHzInductors: 50 µHInsertion loss: less than 0.7 dBIsolation: more than 40 dBMains & EUT Connections: Remote Interface Power Input Port 5.5/2.5 mm Power JackRF Connector: RF Measurement Port 50Ω - N-Type (female)Standards Met: ANSI C63.4, CISPR 16-1-2Voltage Rating: 500 Volts rms (line to line), 288 Volts rms (line to ground) Max DC Voltage: 705VInquire for Availability -
AIF-250K Audio Isolation Transformer for Conducted Susceptibility
SKU: 10702
Frequency Range: 30 Hz to 250 kHzPower Handling: 200 WattsTest Standards: MIL-STD-461Applications: Conducted Susceptibility Testing$250.00In Stock -
3ctest EFT 700 Burst/EFT Simulator up to 7 kV with Single or Three Phase CDN
SKU: sku-566
Test Capabilities: EFT Immunity, Medical DevicesStandards Met: IEC/EN 61000-4-4Applications: CE Marking, Medical Devices, Industrial Machinery, Electronics & ITMax EUT AC Voltage (w/ Built in CDN): 250 Volts (380V w/ 3PH CDN)Max EUT AC Current (w/ Built in CDN): 16 AmpsMax EUT DC Voltage (w/ Built in CDN): 220 VoltsMax EUT DC Current (w/ Built in CDN): 16 AmpsEFT/Burst Pulse Output Capability: 7 kVExternal Coupling: Data Lines -
Solar 7012-106R 10 µF Feed-Thru Capacitor
SKU: 8286
Tolerance: ±10%DC at 85°: 1000 VRMS, 60 Hz: 600 VRMS, 400 Hz: 500 VOutput Power: 200 Amps. Continuous, 350 Amps. Intermittent$110.00In Stock -
EM Test CCI Capacitive EFT Coupling Clamp as per IEC 61000-4-4
SKU: 10570
Application/Test Type: Electrical Fast Transient Immunity on Data Lines (EFT Burst)Standards Met: IEC/EN 61000-4-4Voltage Rating: up to 7.0 kVCompatible Generators: EFT GeneratorsElectrical Noise/Transient ImmunityTypically In Stock -
EFP40G Isotropic Electric Field Probe 1 MHz - 40 GHz
SKU: 30009
Weight: 0.5 lb, 230gDimensions: (LxD): 12.0"x2.25" (310x58 mm)Frequency range: 1 MHz - 40 GHzApplications: RF Interference Analysis and EMF SniffingConnector Type: SMA(f)Inquire for Availability -
LISN-CISPR16 25 Amp Line Impedance Stabilization Network 50μH/250μH
SKU: 12014
Weight: 28 lbsApplications: EMC Conducted Emissions, Precompliance TestingFrequency Range: 9 kHz - 30 MHzOutput Current: 25 AmpTest Standards: CISPR 16 LISNRF Connector: RF Out BNC Female, Test Item SHUKO ConnectorIn Stock -
DRHA20G 1.8 GHz to 20GHz, Double Ridge Horn Antenna
SKU: 11904
Weight: 200g (.44 lbs)Antennas: Double Ridge Guide Horn AntennaConnector: SMA femaleDimensions: 110 x 95 x 70 (mm)Frequency Range: 1.8 GHz - 20 GHzGain: 4 to 18 dBiImpedance: 50 OhmsMaximum Continuous Power: 50 WattsVSWR: less then 2:1, 1.6:1 average$300.00Inquire for Availability -
-
-
Fischer Custom Communications FCC-LISN-5-50-1-01-MS461F, 5uH, 50 Amp, 1 Line LISN for MIL-STD-461F
SKU: sku-732
Application/Test Type: MIL-STD-461F TestsCurrent Rating: 50 AmperesFrequency Range: DC - 400HzInductors: 5 µHMains & EUT Connections: Multi-Contact Safety SocketRF Connector: Multi-Contact Safety SocketStandards Met: MIL-STD-461FVoltage Rating: DC - 60Hz: 480V 400Hz: 130V