Test Equipment

• 

  Steatite QWH-SL-2-18-S-HG-R Linearly Polarised High Gain Wideband Ridged Horn Antenna

  SKU: 1058

  Frequency: 2 to 18 GHz

  Gain: 9.3 to 22.8 degrees

  Antenna Factor: 24 to 35 dB/m

  Connector Type: SMA type jack

  Power Handling: 20 Watt c.w.

  Typically In Stock

  VIEW PRODUCT Cart

• 

  Schwarzbeck FMZB 1513 Active Receive Loop Antenna

  SKU: 30113

  Applications: Antenna Pattern Measurement

  Test Standards: CISPR, MIL, FCC Part 15, ISO, ETSI

  Additional Test Standards: EN, ANSI

  Frequency Range: 9 kHz - 30 MHz

  Connector: 50 Ω N-Type (f)

  Typically In Stock

  VIEW PRODUCT Cart

• 

  Schwarzbeck FAN 450 Monopole Antenna

  SKU: 11261

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  1.2 GHz - 1.4 GHz Automotive 600 V/m Radar Pulse Test Solution

  SKU: sku-1079

  Typically In Stock

  VIEW PRODUCT Cart

• 

  Teseq (Schaffner) NSG 2050 System PNW 2050 w/ CDN 131/133

  SKU: 11050

  Standards Met: IEC/EN 61000-4-5, IEC/ISO 60601-1-2

  Applications: EMC Surge, CE Marking, Surge Immunity

  Max EUT AC Voltage (W/ Built In CDN): 690 Volts

  Max EUT AC Current (W/ Built In CDN): 32 Amps

  Max EUT DC Voltage (W/ Built In CDN): 270 Volts

  Cost New:

  Was:

  Price Now:

  $5,975.00

  1 System Left

• 

  Amplifier Research 50W1000B 1 MHz - 1 GHz RF Power Amplifier

  SKU: 10922

  Frequency Range: 1 MHz - 1 GHz

  Output Power: 50 W

  Flatness: ±1.0 dB typical, ±1.5 dB maximum

  Gain: 47 dB minimum (at max setting)

  Imput Impedance: 50 ohms, VSWR 2.0:1 maximum

  Cost New:

  Was:

  Price Now:

  $695.00

  In Stock

  ORDERING OPTIONS

• 

  Fischer FCC F-120-6A BCI Injection Test Probe

  SKU: 11811

  Aperture: 40 mm

  Connector type: Type-N

  Test Standards: ISO 11452-4, IEC 61000-4-6 BCI, DO-160 Section 20, MIL-STD-461 CS114

  Frequency Range: 10 kHz – 400 MHz

  Input Power: 200 watts

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  Thermo Keytek E510A 10kV Surge Generator

  SKU: 10799

  Standards Met: ANSI/IEEE C62.41 Cat. B and IEC 61000 4-5

  Phase synchronization: ±15° with optional coupler/decoupler

  Pulse current (short circuit): 8/20µs, 0-5.05kA with 2 ohm effective source impedance, ±10%

  Pulse repetition: 1 shot/18 seconds

  Pulse voltage (open circuit): 1.2/50µs, 0-10.1kV ±10% in 1 volt steps

  Typically In Stock

  VIEW PRODUCT Cart

• 

  Fischer Custom Communications F-203I-A-23MM, 10kHz - 1GHz, 100 Watts CW

  SKU: sku-726

  Weight: approx. 7 kg

  Application/Test Type: Injects the disturbance signal through a combination of inductive and capacitive coupling

  Connector: N-type female

  Dimensions: 610 x 75 x 135 mm

  Frequency Range: 10kHz - 1GHz

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  Amplifier Research 50T4G18, 50 Watts CW, 4.2–18GHz, (TWT) Microwave Amplifier

  SKU: sku-717

  Weight: 70 lbs, 32 kg

  Dimensions: 19.8 x 6.5 x 27 in., 50.3 x 16.5 x 68.6 cm.

  Flatness: ±10 dB maximum, 4.2 - 18 GHz

  Frequency Range: 4.2–18GHz

  Gain: GAIN (at maximum setting) ......47 dB minimum GAIN ADJUSTMENT (continuous range)......35 dB minimum

  VIEW PRODUCT Cart

• 

  EM Test ACC Capacitive Coupling Clamp for ISO 7637 Automotive Testing

  SKU: sku-635

  Weight: 11.5 kg

  Application/Test Type: Electrical Fast Transients for automotive applications

  Cable Diameter: up to 40 mm (1.57 in)

  Coupling Length: 1 m (39.4 in)

  Dimensions: 1250 mm x 300 mm x 93 mm, L x W x H

  Inquire for availability

  VIEW PRODUCT Cart

• 

  3ctest CCC100 EFT/Burst Coupling Clamp for IEC/EN 61000-4-4

  SKU: 10621

  Application/Test Type: Electrical Fast Transients on Data Lines (EFT Burst)

  Cable Diameter: up to 40 mm (1.57 in)

  Coupling Length: 1 m (39.4 in)

  Dimensions: 1040x140x110mm

  EFT Coupling Clamps: as per IEC 61000-4-4

  4 to 6 Weeks

  VIEW PRODUCT Cart