-
Surge4-5 Combination Wave Surge Generator
SKU: 11857
- Compact and efficient solution for IEC 61000-4-5 surge immunity testing.
- Built in coupling network to power DUTs up to 270V and 16A
- Output capability from 200 volts to 4.4 kV
- Remote Control Software via USB or Fiber Optic
- 32 memory locations for custom test sequences
$1,250.00 - $16,975.00In Stock -
EFT-DLC-CAL Transducer Plate for Coupling Clamp Calibration
SKU: 12781
Connector Types: Fischer HV, SHV, BNCApplication: EFT Waveform Verification, IEC / EN 61000-4-4 Edition 3Standards Met: Calibration according to IEC / EN 61000-4-4 Edition 3Compatible Couplers: Any$1,475.00IN STOCK -
GTEM 750 Transverse Electromagnetic (TEM) Waveguide
SKU: 10685
Frequency Range (Radiated Emissions): DC to 20 GHzFrequency Range (Radiated Immunity): 80 MHz to 6 GHzMax EUT Size: 60 cm x 60 cm x 37.5 cmTypical VSWR: 1:1.2Applications: Radiated Immunity, Radiated EmissionsTypically In Stock -
Attenuator Set for IEC/EN 61000-4-6 Conducted RF Immunity
SKU: 11584
Power Handling: up to 500 WattsAttenuation: 3dB to 40dBConnectors: N-type typ. (BNC available)Frequency Range: DC to 1 GHz typ.VSWR: 1.2:1In Stock -
EMIC-20 EM Injection Clamp for IEC/EN 61000-4-6 Immunity Test
SKU: 7851
Standards: EN/IEC 61000-4-6Application/Test Type: Injects the disturbance signal through a combination of inductive and capacitive couplingClamp factor (CF): -.5 dB at 100 kHz to -4 dB at 1 GHz (Min -7 dB at 700 MHzConnector: N-type femaleDimensions: 632 mm x 120 mm x 80 mm$595.00 - $8,500.00Typically In Stock -
ISO 11452-4 Level IV BCI Test System (200mA)
SKU: 570459
- Commonly used test systems for bulk current injection setup and test
- Precompliance EMC testing on automotive electrical components and assemblies accoring to ISO 11452-4
- Base package for Level 4, 200mA from 100 kHz to 400 MHz
- Expand systems to achieve up to 1000mA from 4 kHZ to 3 GHz
- ISO 17025 accredited calibrated systems available for test labs
$1,950.00 - $3,250.00Typically In Stock -
AT6-50 6 dB 3 GHz 50W RF Attenuator N-Type
SKU: 9475
- 6 dB Fixed attenuation
- DC to 3 GHz Frequency range
- 50 W Power handling
- N Type (Male/Female) Connector type
- Low VSWR for stable signal performance
Typically In Stock -
RFT Electromagnetic Reverberation Tent (Stir Paddle)
SKU: 11203-1
- Acceptable alternative for radiated immunity testing in a reverberation chamber
- Available for our larger tents up to 10' by 20' by 10'
Most Sizes In Stock -
DC6G100M-500 Directional Coupler per ISO 11452-9
SKU: 4162026-1
- Wide Frequency Range 100 MHz To 6 GHz
- 40 dB Stable Coupling Factor
- High Power Handling Up To 500 W
- Low Insertion Loss For Signal Integrity
- High Directivity For Accurate Measurements
In Stock -
LISN-CISPR16-63A 50µH, AC Line Impedance Stabilization Network
SKU: 8671-1
- 63 Amp, 3 Phase, 690 Volt AC Power Handling Capability
- Utilized for conducted emissions measurements and product compliance testing
- Built in accordance to CISPR 16-1-2 requirements.
- CEE / IEC 60309 power connector and socket
- Artificial hand, External 9 kHz high pass filter and separate RF ports to measure each line.
Inquire for Lead Time -
SGHA75G WR-15 Waveguide Horn Antenna 50–75 GHz 20 dBi Gain
SKU: 9939
- 50 GHz To 75 GHz V-Band Frequency Coverage
- WR-15 Standard Waveguide Interface
- 20 dBi Nominal Gain
- Directional Radiation Pattern For Accurate RF Measurements
- Suitable For EMC Testing And Antenna Measurement Systems
In Stock -
SGHA50G WR-22 Waveguide Horn Antenna 33–50 GHz 20 dBi Gain
SKU: 9938
- WR-22 Waveguide Horn Antenna for Millimeter-Wave Applications
- 33 GHz to 50 GHz (Q-Band) Frequency Range
- 20 dBi Nominal Gain
- Directional radiation pattern for accurate RF measurements
- Compatible with WR-22 waveguide test systems
In Stock