FT7-FTF-1113 FT Overview
The FT7-FTF-1113 FT is a walk-in RF/EMI shielded tent measuring 11' x 13' x 7' (3.3 m x 4.0 m x 2.1 m). Built from high-shielding conductive fabric on a fixed tubular frame, it delivers shielded-room performance for EMC pre-compliance, wireless device isolation, radiated emissions and radiated immunity testing where a permanent shielded room is impractical because of space, cost or lead time.
The enclosure ships as a complete kit with a magnetic-seal door, a shielded feedthrough panel with a filtered Cat6 RJ45 port and waveguide, and six honeycomb ventilation blocks with 18 fans (three intake, three exhaust) to keep equipment and personnel comfortable during extended tests. The prefabricated frame assembles and disassembles quickly and packs into soft carry bags for transport between sites.
Features
- Shielded-room performance at a fraction of the cost and installation time
- Average 80 dB attenuation at 400 MHz and 1 GHz, 70 dB at 10 GHz
- Specially processed conductive fabric with magnetic-plate door seal
- Fixed tubular frame - easy to move, install and disassemble
- Shielded I/O panel with filtered Cat6 RJ45 feedthrough and waveguide port
- 18 cooling fans in 6 honeycomb vent blocks (3 intake / 3 exhaust)
- Conductive floor mat, tie-down straps and soft carry bags included
Specifications
| Enclosure dimensions | W 3300 x L 4000 x H 2100 mm (11' x 13' x 7') |
| Enclosure fabric | Conductive fabric, specially processed layer |
| Door seal | Magnetic plate |
| Shielding effectiveness | Avg. 80 dB at 400 MHz, 80 dB at 1 GHz, 70 dB at 10 GHz |
| I/O panel | RJ45 (Cat6) x 1, waveguide (Ø 25.2 mm, L 203 mm) x 1 |
| Cooling | W 120 x L 360 mm fan blocks, intake x 3 / exhaust x 3 (18 fans total) |
| Frame | Fixed tubular frame |
| Weight | 37 kg (82 lb) |
Kit Contents
- Shielded tent with 6 honeycomb filter panels and Cat6 filter panel installed
- 18 fans (3 per vent block)
- Door magnets: M1 x 1, M2 x 16; floor magnets M4 x 4
- Tubular frame poles: P1 x 16, P2 x 17, P3 x 9, P4 x 6, P5 x 4, P6 x 6
- Pole connectors: T x 9, straight x 25, corner x 8
- Floor mat, straps, soft carry bags and user manual
Options & Related Equipment
- Custom RF connector panels (N, SMA, BNC, USB, fiber sleeve)
- Shielded power line filters and EMI-hardened lighting
- RF absorber lining for anechoic performance
- Antenna masts, tripods, test tables and other positioning equipment
- Radiated emissions and immunity test systems
Custom sizes, door configurations and feedthrough panels are available on request. Contact The EMC Shop for rental, purchase and calibration options.
