CISPR 14 EMC Testing and Test Equipment

CISPR 14-1

(Showing 12 of 13)

The EMC Shop helps design, electrical and compliance engineers test and certify household appliances, electric tools and similar products with rental equipment or testing services.

Conducted disturbances set-up and measurements

Radiated disturbances set-up and measurements

CISPR 14-1:2020 specifies the requirements that apply to the emission of radio-frequency disturbances in the frequency range 9 kHz to 400 GHz from appliances, electric tools and similar apparatus as defined below, whether powered by AC or DC (including a battery). This document is applicable to the following equipment:
- household appliances or similar equipment;
- electric tools;
- similar apparatus.

This seventh edition cancels and replaces the sixth edition published in 2016. This edition constitutes a technical revision. This edition includes the following significant changes with respect to the previous edition:
- extension of the frequency range for radiated measurements above 1 GHz;
- revision of general test conditions and addition of new specific test conditions (e.g. for robotic equipment);
- introduction of additional requirements for equipment making use of inductive power transfer technology;
- remove from the normative text any compliance requirement based on statistical evaluation;
- revision of clicks analysis, with particular relevance to the determination of the observation time and the application of the upper quartile method for different types of click analysers.
Refer to the Foreword of the document for examples of equipment.

Test equipment

Measuring receivers
Artificial Mains Networks
Voltage Probes
Current Probes
Absorbing Clamp
Radiated Emissions Test Site

CISPR 14-1 Test Equipment, Systems & Solutions

Conducted Emissions Test Setup

SKU: 7077

Applications: Conducted emissions testing on power and data lines, CE Marking

Test Standards: IEC 61000-4-7, IEC 61000-4-30, IEC-61000-4-19, CISPR 11, CISPR 25, CISPR 32, FCC Part 15, MIL-STD 461, ANSI C63.4, DO-160 and more

Measurement Range: 1 kHz - 1 GHz (150 kHz - 30 MHz typical)

Power Handling: up to 1,000 Volts and 1,000 Amps

OEM Measurement Receivers Available: Rohde & Schwarz, Keysight, Siglent, Rigol, PMM, Amplifier Research, Frankonia

OEM LISN's Available: Schwarzbeck, FCC, Com-Power, Solar Electronics, PMM, Tekbox, Agilent/HP

Generic Standards: IEC 61000-6-3, IEC 61000-6-4

Cost New:

Was:

Price Now:

$590.00

In Stock

Ordering Options
Fischer FCC F-CVP-1 Capacitive Voltage Probe per CISPR 32

SKU: 12354-1

Applications: Common Mode Measurements

Standards Met: CISPR 32, EN 55032

Cost New:

Was:

Price Now:

$195.00

In Stock
RFT-09 Faraday Tent for Radiated Emissions Testing

SKU: sku-2266

Attenuation: 90 dB typical

Frequency Range: (150 kHz) 30 MHz - 18 GHz

Applications: Radiated Emissions and Radiated Immunity Precompliance

Standard Options: Lights and Vent

Enclosure Size: 9ft x 9ft 6.5ft

Frame Size: 10ft x 10ft x 9.5ft

Door Size: 70in x 40in

Frame Type: Portable and Heavy Duty

Feedthroughs: 120 VAC, N(f), BNC(f), SMA(f), Sleeve

View Product Cart
RFT-07 EMI Tent for Radiated Emissions Testing

SKU: 8459

Attenuation: 90 dB typical

Frequency Range: (150 kHz) 30 MHz - 18 GHz

Standard Options: Lights and Vent

Enclosure Size: 7ft x 7ft 6.5ft

Frame Size: 8ft x 8ft x 8ft

Door Size: 5ft x 5ft

Frame Type: Portable and Heavy Duty

Feedthroughs: 120 VAC, N(f), BNC(f), SMA(f), Sleeve

Applications: EMC Precompliance Testing, Radiated Emissions

IN STOCK

View Product Cart
Rent Keysight N9048B CISPR 16 EMI Receiver

SKU: 22153

Frequency Range: 1 Hz to 26.5 GHz

Standards Met: CISPR 16-1-1, ANSI C63.2, FCC

Calibration: Accredited ISO 17025

Options: See "Installed Options"

Applications: Conducted Emissions, Radiated Emissions,

Technical Note: Differences Between EMI Test Receivers and Spectrum Analyzers

IN STOCK

View Product Cart
Schwarzbeck PVDC 8300 DC AMN (LISN)

SKU: sku-1145

View Product Cart
Rohde & Schwarz ESRP3 EMI Test Receiver per CISPR 16-1-1

SKU: 11695

Frequency Range: 9 kHz to 3.6 GHz

SSB Phase Noise: –90 dBc (1 Hz) (typ.)

Frequency Response: 9 kHz ≤ f < 100 kHz < 4 dB

Dynamic Range: RBW = 1 kHz, f > 10 MHz 110 dB

Harmonics, nonharmonic spurious: output level = –10 dBm –30 dBc

RF Output Connector: N female, 50 Ω

Applications: Differences Between EMI Test Receivers and Spectrum Analyzers

Test Standards: CISPR 16-1-1, ANSI C63.2, MIL‑STD‑461 and FCC

Inquire

View Product Cart
Com-Power CLA-150 32mm Absorbing Clamp CISPR 14

SKU: 1551

Test: CISPR 14

Application/Test Type: Conducted Emissions, Radiated Emissions

Clamp factor (CF): -3 dB to +4 dB

Dimensions: 627 x 114 x 165 mm (24.7 x .4.5 x 6.5 inches)

Frequency Range: 30 MHz to 1000 MHz

Isolated lines under test: Power supply lines and other connecting lines

Max. Cable Diameter: 32 mm (1.26 inches)

Min. site attenuation: 14 dB to 21 dB

RF Connector: BNC (f), 50 Ohms

Cost New:

Was:

Price Now:

$595.00

Inquire for Availability

Ordering Options
Teseq (Schaffner) AMZ 41 CISPR 14 Absorbing Clamp for Measuring Power Disturbances

SKU: sku-77

INQUIRE

View Product Cart
PMM ER9000 EMI Test Receiver

SKU: 12366

Frequency Range: 10 Hz - 3 GHz

Compliant?: Yes

Applications: Conducted Emissions, Radiated Emissions

Pre-programmed Test Limits: CISPR 11, CISPR 22, ANSI C63.2

Other Features: Click Analyzer (CISPR 14-1)

App Note: Differences Between EMI Test Receivers and Spectrum Analyzers

Typically In Stock

View Product Cart
PMM 9010F CISPR 16-1-1 and MIL-STD-461 Compliant EMC/EMI Receiver

SKU: 3246

Compliant Standards: CISPR 16-1-1, ANSI C63.2, MIL‑STD‑461 and FCC

Cost New:

Was:

Price Now:

$750.00

INQUIRE

Ordering Options
LISN-CISPR25-800 Artificial Mains Network (AMN) for Electric Vehicles

SKU: 22141

EUT Current Handling: 800 Amps

EUT Voltage Handling: 1,000 Volts DC (400V 50/60Hz, 300V 400 Hz)

Applications: EV Electric Vehicle EMC Testing, BCI Testing, Conducted Emissions Measurements

Test Standards: CISPR 25, MIL-STD-461, ISO 7637-2, ISO 7637-4, ISO 21498-2, ISO 11452-4, DO-160, DEF-STAN-59, ECE R10

Inductance: 5 µH

2-4 WEEKS

View Product Cart

CISPR 14-1

CISPR 14-1 Test Equipment, Systems & Solutions

Connect with The EMC Shop