Categories
Test Equipment, Systems & Solutions
-
A.R. 500A100A Solid State RF Amplifier, 500 Watts CW, 10 kHz - 100 MHz
SKU: sku-775
Weight: 150 lbsDimensions: 19.8 x 16.8 x 21.7 inFlatness: .± 1.5 dB maximum ± 0.5 dB with internal levelingFrequency Range: 10 kHz - 100 MHzGain: GAIN (at maximum setting).........57 dB minimum GAIN ADJUSTMENT (continuous range)....25 dB minimumImpedance: 50 ohmsInput: 180 - 264 VAC 47 - 440 Hz, 2000 watts maximum @ 0.99 P.F. typicalOutput: POWER OUTPUT, CW Nominal .... 617 watts Minimum...... 500 watts Linear @ 1 dB compression .. 300 watts minimumRF Connector: Type N femaleRF Input Voltage: 1.0 milliwatt maximum for rated outputInquire for Availability -
Keysight / Agilent E9304A RF Power Sensor, 9 kHz - 6 GHz
SKU: 6577
Frequency Range: 9 kHz to 6 GHzApplication: Radiated ImmunitySensitivity: -60 to +20 dBmConnector: Type-NIn Stock -
Motorola SH-120 RF Shielded Test Enclosure Shield Box EMI Chamber
SKU: sku-771
Dimensions: 420mm L x 260mm W x 280mm H -
Rohde & Schwarz SMF100A Microwave Signal Generator
SKU: sku-770
Warranty: 120 DaysFrequency Range: 1 GHz to 22 GHzResolution: 0.001 HzRF Connector: R&S®SMF-B81Trigger: auto, external trigger, external gateIn Stock -
Keysight (Agilent/HP) E8247C-520 PSG Signal Generator, 250 kHz to 20 GHz
SKU: sku-769
Weight: 48 lbs.Dimensions: 7” H x 16.8” W x 19.6” DFrequency Range: 250 kHz to 20 GHzResolution: 0.001 HzRF Connector: BNC femaleSwitching time: less than 12 msTrigger: Auto, external, single, or GPIB$26,500.00 -
-
CE Mark Product Package for IEC/EN 61000-4 Series Compliance
SKU: TES-CE-Mark-RI-CI
Applications: CE Marking, EMC Precompliance Testing, Conducted ImmunityHarmonized Standards: IEC/EN 61000-4-4, IEC 61000-4-5, IEC 61000-4-11Industries: Medical DevicesTest Setup: Conducted Immunity/Susceptibility Test SetupPeak inrush current capability: greater than 500 AmpsPre-Programmed IEC Levels: YesIN STOCK -
EM Test CSS 500N10 Current Surge Generator, 8/20us Up To 10ka
SKU: sku-747
Weight: approx. 66 lbs.Coupling: N/ADimensions: 19"/6HU,Polarity: positive / negative / alternatePulse current (short circuit): 0.4kA to 10kA +/-10%Pulse voltage (open circuit): 250V to 6,000V +/-10%, Step width 50VRepetition time: Max. 10 pulses per minute, depending on the charging voltage -
AH Systems FCC-4 High Frequency Tuned Dipole Antenna, 325 MHz to 1000 MHz, CISPR 16-1-5, 60 Watts
SKU: sku-746
Weight: 0.4 lbsAntennas: Dipole AntennasApplication/Test Type: site attenuation measurementsConnector: N-type (female)Dimensions: Length 9 in.Frequency Range: 325 MHz - 1000 MHzGain: 0 to 2 dBiImpedance: 50 Ohms nominalMaximum Continuous Power: 60 WattsMounting Base: One balun mounting clamp with 1/4-20 threads -
AH Systems FCC-3 Tuned Dipole Antenna, 170 MHz to 340 MHz, 90 Watts
SKU: sku-745
Weight: 0.5 lbsAntennas: Dipole AntennasApplication/Test Type: site attenuation measurementsConnector: N-type (female)Dimensions: Length 12.5 in.Frequency Range: 170 MHz - 340 MHzGain: 1 to 2 dBiImpedance: 50 Ohms nominalMaximum Continuous Power: 90 WattsMounting Base: One balun mounting clamp with 1/4-20 threads -
AH Systems FCC-2 Half-wave Dipole Antenna, 65 MHz to 180 MHz, 200 Watts
SKU: sku-744
Weight: 0.7 lbsAntennas: Dipole AntennasApplication/Test Type: site attenuation measurementsConnector: N-type (female)Dimensions: Length 21.7 in.Frequency Range: 65 MHz - 180 MHzGain: 0 to 2 dBiImpedance: 50 Ohms nominalMaximum Continuous Power: 200 WattsMounting Base: One balun mounting clamp with 1/4-20 threads -
AH Systems FCC-1 Tuned Dipole Antenna, 25 MHz – 70 MHz, 300 Watts
SKU: sku-743
Weight: 1.2 lbsAntennas: Dipole AntennasApplication/Test Type: site attenuation measurementsConnector: N-type (female)Dimensions: Length 23.7 in.Frequency Range: 25 MHz to 70 MHzGain: -5 to 2 dBiImpedance: 50 Ohms nominalMaximum Continuous Power: 300 WattsMounting Base: One balun mounting clamp with 1/4-20 threads