Test Equipment, Systems & Solutions

• 

  Teseq CDN M016 Switchable 16 Amp Coupling/Decoupling Network

  SKU: 10827

  Associated Equipment: RF Conducted Immunity Test Systems

  Application/Test Type: switchable 2 or 3 power lines, (L+N or L+N+PE)

  Common Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 Ω

  Current Rating: 16 Amps

  Decoupling of Common Mode Disturbance: 150 kHz: Greater than 30 dB 1.5 MHz: Greater than 60 dB 30 MHz: Greater than 40 dB 230 MHz: Greater than 20 dB

  Dimensions: 3.9" x 3.9" x 9.5" (100 mm x 100 mm x 240 mm)

  Frequency Range: 150 kHz to 230 MHz

  Insertion Loss: Less than 0.1 dB

  Mains & EUT Connections: 4 mm banana

  RF Connector: BNC 50 Ω

  RF Input Voltage: 30 Volts (Max)

  Standards Met: IEC/EN 61000-4-6

  Voltage Division Factor: 150 kHz to 80 MHz: 9.5 dB ±1 dB 80 MHz to 230 MHz: 9.5 dB +3 dB / -2 dB

  Voltage Rating: AC max. voltage (line to ground): 250 V DC max. voltage (line to ground): 400 V; 3 kV DC, 2 sec

  Cost New:

  Was:

  Price Now:

  $195.00

  Typically In Stock

  Ordering Options

• 

  Ophir Model 5022 RF Broadband Amplifier, Class A/AB, 1.0-2.0 GHz, 40 Watt, 48 dB Gain

  SKU: sku-816

  Weight: 37 LBs

  Dimensions: 19” x 5.25” x 20”

  Frequency Range: 1.0 - 2.0 GHz

  Gain: 48 dB

  Impedance: 50 ohms

  Input: 100 – 240 VAC, single phase

  Output: 40 Watts

  RF Connector: Type N female

  Cost New:

  Was:

  Price Now:

  $8,100.00

• 

  Fischer F-35A 100 Hz – 108 MHz Current Monitor Probe

  SKU: 1819

  Aperture: 32 mm

  Connector type: Type-N

  Dimensions: Internal diameter: 32 mm External diameter: 98 mm Height: 38 mm

  Frequency range: 100 Hz – 100 MHz

  General Data: Technical Details

  High frequency 3dB cut-off: 108 MHz

  Low frequency 3dB cut-off: 100 Hz

  Maximum peak current: 100 Amps

  Output resistance: 50 Ohms

  Probes: Current monitoring

  Cost New:

  Was:

  Price Now:

  $195.00

  In Stock

  Ordering Options

• 

  Teseq NSG 4070C-80 Integrated Signal Generator, 4 kHz to 1 GHz, 80 W Integrated Class A Power Amplifier

  SKU: sku-809

  Test Capabilities: RF Conducted Immunity

  Standards Met: IEC/EN 61000-4-6

  Applications: CE Marking, Medical Devices, Industrial Machinery, Electronics & IT

  CDN Test Levels (w/ built-in amplifier): 40Vrms

  BCI Test Levels (w/ built-in amplifier): 8Vrms

  Frequency Range (w/ built-in amplifier): 150 kHz - 230 MHz

  Videos: Calibration Example, Remote Operation Setup

  Typically In Stock

  View Product Cart

• 

  Keysight E4419B EPM Series Dual-Channel Power Meter, Battery Operated, 9 kHz to 110 GHz, –70 dBm to +44 dBm

  SKU: sku-807

  Weight: 4.1 kg (9.0 lb) net

  Dimensions: 212.6 mm W x 88.5 mm H x 348.3 mm D (8.5 in x 3.5 in x 13.7 in)

  General Data: Technical Details

  RF Field Probe Frequency Range: 9 kHz to 110 GHz

  RF Field Probe Power Measurement Range: –70 dBm to +44 dBm (100 pW to 25 W), sensor dependent

  Supply Voltage: Battery

  Cost New:

  Was:

  Price Now:

  $350.00

  Ordering Options

• 

  Amplifier Research PM2003 Power Meter, 3 Channel, 10 kHz - 40 GHz, -70dBm to +44dBm

  SKU: sku-805

  Weight: 7 lbs (3.2 kg)

  Dimensions: 8.25 in (21.0 cm) wide, 3.5 in (8.9 cm) high, 13.25 in (33.7 cm) deep

  RF Field Probe Connector: Inputs: Rear panel HEAD connectors and rear panel IEEE-488 connector standard. Outputs: Rear panel PWR/REF connector, 0dBm, 50 MHz. Rear panel RECORDER BNC connector, 0 to 10V into 1mW.

  RF Field Probe Frequency Range: 10 kHz-40 GHz, power head dependent

  RF Field Probe Maximum Input Power: May be operated into 1kW or 1V fs

  RF Field Probe Power Measurement Range: -70dBm to +44dBm, power head dependent

  View Product Cart

• 

  Noiseken LSS-15AX Series Lightning Surge Simulator up to 15kV

  SKU: sku-800

  Weight: 200 kg.

  Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5

  Coupling: AC/DC lines CDN, and Telecom lines CDN

  Dimensions: 555 X 1250 X 790 mm

  Impedance: 2 Ohm

  Mains & EUT Connections: 4mm banana plug

  Phase synchronization: 0°-360°, 1°step or random

  Polarity: Positive, Negative, Alternate

  Pulse current (short circuit): 15kV/7500A

  Pulse repetition: 20 sec

  Pulse voltage (open circuit): 15kV/7500A

  Standards Met: IEC 61000-4-5

  Inquire for Availability

  View Product Cart

• 

  Schloder M Type CDN's for Disturbance Signals to Unscreened Supply Lines (mains) AC + DC up to 1000V, 100A

  SKU: sku-791

  Application/Test Type: unscreened supply lines (mains) AC + DC

  Current Rating: 16A / 32A / 63 A / 100 A

  Dimensions: 160 x 84,5 x 240mm or 200 x 122,5 x 400mm depending on model

  Frequency Range: 150 kHz to 230 MHz

  Mains & EUT Connections: banana sockets

  RF Connector: 50 Ω BNC (Female)

  Standards Met: IEC / EN 61000-4-6

  Voltage Rating: up to 250 VAC / 400 VDC

  View Product Cart

• 

  3 Phase EFT/Burst, Surge Combination Wave Test System

  SKU: 1785

  Application/Test Type: CE Marking, EMC Precompliance Testing

  Burst (EFT) 5/50 ns: Pulse conforms to IEC/EN 61000-4-4

  Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5

  Pulse amplitude: 0.2 – 5.0 kV

  Pulse current (short circuit): 0.1 – 2.5 kA ±10% (8 us ±20% risetime)

  Rentals Ship Today

  View Product Cart

• 

  Schloder VIS 1700 Voltage Interruption Simulator

  SKU: sku-784

  Communication: BNC outputs (on rear) for voltage, current and scope triggering

  Coupling: BNC

  Dips, Interrupts & Variations: Conforms to IEC/EN 61000-4-11, IEC/EN 61000-4-29

  General Data: Technical Details

  Mains & EUT Connections: 4mm banana line

  Output Current: AC max. 280 V, DC max. 3 6 0 V

  Peak inrush current capability: 16 Amps

  Phase synchronization: at any phase position 0° - 360 °

  Test duration: 0.1sec - 9990sec, furthermore single event and continuous operation

  Test Voltage: AC max. 280 V ,DC max. 3 6 0 V

  Applications: EMC Precompliance Testing, Conducted Immunity

  Typically In Stock

  View Product Cart

• 

  EFT-DLC EFT/Burst Capacitive Coupling Clamp for Data Lines

  SKU: 1780

  Application/Test Type: Electrical Fast Transients on Data Lines (EFT Burst)

  Built in Accordance to: IEC 61000-4-4

  Coupling Length: 1 m (39.4 in)

  Compatible Impulse Generators: Any EFT/Burst Generators (custom HV cable may be required)

  RF Connector: Fischer HV Connector

  Voltage Rating: up to 5.0 kV

  Cost New:

  Was:

  Price Now:

  $195.00

  In Stock

  Ordering Options

• 

  Rent EM Test TSS 500M2F Telecom Surge Simulator for FCC Part 68

  SKU: sku-776

  Weight: approx. 35kg

  Application/Test Type: Test levels as per FCC part 68

  Coupling: Telecom ports: Tip to Ground, Ring to Ground, Tip and Ring to Ground Power ports 250V/16A: L toN, L to PE, N to PE , L+N to PE

  Dimensions: 19“ / 6HU,

  Output Current: 64A – 1,000A (power line) 20 – 200A per wire (surge A)

  Outputs: 4 mm banana socket

  Polarity: pos / neg / alternate

  Rise time: Less than 2 us

  Telecom Surge: As per FCC part 68, Pulse B, IEC 61000-4-5, ITU and ETSI recommendations

  Test Voltage: 160V – 2,500V ± 10% (power line) 160V – 1,500V ± 10% (surge A)

  Trigger of bursts: Automatic pulse release

  View Product Cart