Categories
Test Equipment, Systems & Solutions
-
CP-CF Calibration Fixture for Current Probes
SKU: 11911
Max Probe Girth: 2.75"Fits Probe Arpetures: 1.25" to 1.75"Frequency Range: 20 Hz - 500 MHzInsertion Loss: < 2dBConnetors: N(f)Applications: Conducted Immunity/Susceptibility Test SetupTest Standards: IEC/EN 61000-4-6, ISO 11452-4Cost New:$2,275.00$1,975.00In stock -
ETS-Lindgren 3164-04 Diagonal Dual Polarized Horn Antenna
SKU: sku-1907
Frequency Range: 700 MHz - 6 GHzApplications: Antenna Pattern Measurements, EmissionsTest Standards: IEC 61000-4-3Gain: 6 - 14 dBi -
Turnkey Antenna Pattern Measurement System and Chamber
SKU: TAPMSC
Frequency Range: DC - 110 GHzIsolation: >100 dBInquire for Lead Time -
RF Screen Room Test Kit
SKU: 988
Weight: 26 lbFrequency Range: 95 kHz (Crystal Controlled)Output Signal: Pulse modulated at approximately 600 Hz and has a 50% duty cycleReceiver: Two meter scales for high and low operation Aural output for headphone operation Battery operated for portable use Dynamic range of 120dBTransmitter Output: 1 Ampere RMS into an inductive load from approximately 5–50 μHy$595.00One Unit Left! -
RF/EMI Shielding Effectiveness Testing
SKU: sku-1900
Weight: 26 lbFrequency Range: 95 kHz (Crystal Controlled)Output Signal: Pulse modulated at approximately 600 Hz and has a 50% duty cycleReceiver: Two meter scales for high and low operation Aural output for headphone operation Battery operated for portable use Dynamic range of 120dBTransmitter Output: 1 Ampere RMS into an inductive load from approximately 5–50 μHy -
Haefely MAG 1000 AC Magnetic Field Generator per IEC 61000-4-8
SKU: 1897
Test Standards: IEC 61000-4-8Max Continuous Field Strength: 1 - 120 A/mShort Duration Levels: Up to 1000A/mTest Times: 1 min to 8 HoursIn Stock -
York CNE III Comparison Noise Emitter, 9 kHz - 3.5 GHz
SKU: sku-1896
Weight: 1 lbs. / 0.48 kgAC Power Adapter: 6 VDC, 500 mA / 110VAC 60 Hz or 230 VAC 50 HzApplication/Test Type: EMI Radiated Site Reference SourceFrequency Range: 9kHz to 3.5GHz outputOperation Time: 12 Hours Typical With Fully Charged BatteryPolarity: Vertical and HorizontalTypically In Stock -
DC1G-100 10 kHz - 1 GHz, 100 Watt Dual Directional Coupler
SKU: 7024
Frequency Range: 1 GHz - 10 kHzCoupling Value: 40 dBMax Power Handling: 100 WattsConnectors (Main Line): N(f)Connectors (Coupling Line): N(f)VSWR: 1.3:1$2,975.00IN STOCK -
In Stock
-
SGH40G 26.5 GHz - 40 GHz Standard Horn Antenna, 25 dBi
SKU: sku-1885
Connector: WR-28Frequency Range: 26.5 GHz to 40 GHzGain: 25 dBiMax Power: 20 WattsApplications: Radiated Immunity, Radiated EmissionsStandards: MIL-STD-461 RS103, FCC Part 15In Stock -
TWT8G-200 2 GHz - 8 GHz, 200 Watt RF Power Amplifier
SKU: sku-1884
Frequency Range: 53 dB min.Weight: 70 lbs.Connector type: N (Female)Dimensions: 8.75"H x 19"W x 24.5"DFrequency Range-2: 2 GHz - 8 GHzRated Power: 200 watts minimum -
EM Test / Luthi EM 101 EM Injection Clamp for IEC/EN 61000-4-6
SKU: sku-1881
Weight: approx. 7 kgApplication/Test Type: Injects the disturbance signal through a combination of inductive and capacitive couplingClamp factor (CF): Max (0.15 to 400 MHz): 4 dB (50 Ω system) and 13.5 dB (150 Ω system)Connector: N-type femaleDimensions: 647 mm x 130 mm x 105 mmFrequency Range: 10 kHz to 1000 MHzImpedance: 50 OhmsMax. Cable Diameter: 20 mmMaximum Continuous Power: 0.01 to 100 MHz: 100 W for 15 min; 100 to 230 MHz: 100 W for 3 min; 230 to 1000 MHz: 50 W for 3 minStandards Met: IEC/EN 61000-4-6; CISPR 24; EN 61000-6-1; EN 61000-6-2; IEC 60533; IEC 60601-1-2; IEC 61326