Categories
Test Equipment, Systems & Solutions
-
California Instruments 1501iX Programmable AC Power Source
SKU: 30090
Weight: per Chassis: Net: 61 lbs / 28 Kg, Shipping: 115 lbs / 52 KgCurrent rating: 120 ampsDimensions: Height: 7” (178 mm), Width: 19” (483 mm), Depth: 24” (610 mm) (depth includes rear panel connectors)Frequency Range: 16.00 - 81.91 Hz (0.01 Hz resolution) 81.0 – 819.1 Hz (0.1 Hz resolution) 820 – 1000 Hz (1 Hz resolution)¹Voltage ranges: 150-300 VoltsApplications: Conducted ImmunityTest Standards: IEC-61000-4-29$5,400.00In Stock -
AE Techron 7234 Industrial Power Amplifier/Battery Simulator
SKU: 4302
AC Power Adapter: Single phase, 120 VAC, 60 Hz, 20A service; (220-240 VAC, 50-60 Hz, 10A service model available)Frequency Range: DC—300 kHz (1 watt): +1 to -2.0 dBGain: Voltage Mode: 20 volts/volt Current Mode: 5 amperes/voltImpedance: 20k ohm differentialMax input power: ±10V, balanced or unbalancedOperating Temperature: 10°C to 50°C (50°F to 122°F), maximum output Power de-rated above 30°C (86°F).Output Impedance: 5.3 mΩ in series with 0.95 µHOutput voltage: ±150 VpApplications: Radiated Immunity$595.00 - $5,950.00Typically In Stock -
AE Techron 7224 Linear Power Amplifier
SKU: 6792
Test Standards: DO 160 Section 16, 18, 19, SAE J113Frequency Range: DC - 300 kHzGain: Voltage Mode: 20 volts/volt Current Mode: 5 amperes/voltImpedance: 20k ohm differentialMax input power: ±10V, balanced or unbalancedOutput Impedance: 5.3 mΩ in series with 0.95 µHOutput voltage: ±150 VpAdditional Test Standards: ISO 16750-2, MIL-STD-461Applications: Radiated ImmunityTypically In Stock -
Teseq CDN M532 5-Line/32 Amp RF Coupling/Decoupling Network
SKU: 12093
Associated Equipment: RF Conducted Immunity Test SystemsCommon Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω; 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 ΩCurrent Rating: 32 Amps MaximumDecoupling of Common Mode Disturbance: Greater than 30 dBDimensions: 6.3 x 6.3 x 20 inches (16.0 cm x 16.0 cm x 50.0 cm)Insertion Loss: Greater than 0.1 dBMains & EUT Connections: 4 mm, safety (Optional IEC 320 16A)RF Connector: BNC, 50 ΩRF Input Voltage: Less than 30 VStandards Met: IEC 61000-4-6Voltage Division Factor: 10 dB +3 dB / -1 dBEMC Test Standard: IEC/EN 61000-4-6 -
Amplifier Research 30W1000 1MHz - 1 GHz RF Amplifier
SKU: sku-2090
Weight: 45 lbDimensions: 19.8 x 6.1 x 14.8 inFlatness: ±1.0 dB typical ±1.5 dB maximumFrequency Range: DC-1MHz -1000 MHz (1GHz)Gain: 30 dB minimumImpedance: 50 ohms, VSWR 2.0:1 maximumInput: 1.0 milliwatt maximumOutput: 30 watts minimumRF Connector: Type N female on front panel, Remote control: IEE-488 24 Pin female RS-232 9 pin sub D female -
ETS-Lindgren HI-2200 Electric and Magnetic RF Survey Meter
SKU: 30194
Meter Internal Memory: >65,000 data pointsUser Selectable Units: V/m, μW/cm2, mW/cm2, W/m2 A/m, mA/mMeter Connector Type: RS-232 I/O serial interface six-pin mini DINTest Standards: IEC 61000-4-3Inquire for Availability -
$7,500.00 -
3 Meter Antenna Pattern Measurement and Characterization Chamber & Test System
SKU: 32084
Frequency Range: DC to 18 GHz (Expandable to 40 GHz)Enclosure Dimensions: 15' by 10' by 10'Antenna Turntable/Positioning System: DAMS 6000Software: DAMS Antenna Measurement StudioInquire for Lead Time -
Keysight (Agilent) N9020A MXA Signal Analyzer Rental, 10 Hz - 3.6 GHz
SKU: 3074
Frequency Range: 10 Hz - 3.6 GHz or 26.5 GHzResolution Bandwidth: 1 Hz - 10 MHzMeasurement Speed: 4 ms (250/s)Options: Many AvailableCalibration Status: NISTIn Stock -
Quadtech Guardian 6000 Plus Electrical Safety Analyzer
SKU: 12080
Test Standards: EN60335, EN60950, EN61010, CSA C22.2 No. 1010.1, UL3111and UL6095Electric Tests: Electrical Analyzer AC/DC Hipot, Insulation, Ground BondGround Bond Testing: up to to 30A ACProgrammable Output Voltage: up to 5KV AC and 6KV DC$3,995.00IN STOCK -
Narda 8511 Magnetic Field Meter, 300 kHz - 100 MHz
SKU: 6196
Frequency Range: 300 kHz to 100 MHzBand Coverage: 0.3 - 1.0 MHz, 1.0 - 20 MHz,20 - 80 MHz, 80 - 100 MHzMeasurement Range: 0.1 bis 100 mW/cm² E field, 0.2 bis 200 mW/cm² H fieldCondition (Scale 5-10): 7 (Good)$3,750.00In Stock -
Wavecontrol WPF3-HP 100 kHz - 3 GHz E-Field Probe
SKU: 12068
Field Strength Range: 0.2 - 1,000 V/mApplication/Test Type: Monitoring electric field strengthsVideos: Menu Run-ThroughFrequency Range: 100 kHz - 3 GHzTypically In Stock