Categories
Test Equipment, Systems & Solutions
-
-
RFE-10 RF/EMI Shielded Enclosure, 100 dB to 20 GHz
SKU: sku-2112
Dimensions: 10’ x 10’ x 8’H (~3.04m x 3.04m x 2.43m)Highest RF Shielding Attenuation Performance: 100 dB up to 20 GHz (40 GHz Optional)Filters: Power Filter, Single Phase - 2 x 26A, 250VAC, 480/277AC UL ListedInstallation: Self installation or services availableCall For Current Availability -
HDC18G-20 90-Degree 3dB Hybrid Directional Coupler, 1 - 18 GHz
SKU: 4317
Max Frequency: 1 GHzMin Frequency: 80 MHzCoupling Value: 40 dBMax Power Handling: 200 WattsConnectors (Main Line): SMA(f)Connectors (Coupling Line): SMA(f)VSWR: 1.3:1$1,800.00Typically In Stock -
Teseq MBT 2 Hand-Operated Slide Lane for Absorbing Clamps for CISPR 16-2-2-1
SKU: sku-2106
Weight: 110.3 lbs.Dimensions: 232.2in. x 31.5in. -
$699.00 -
Amplifier Research 10S1G4 RF Amplifier, 700 MHz - 4.2 GHz, 10 Watts
SKU: sku-2103
Weight: 37 lbsDimensions: 19.8 x 6.1 x 14.8 inFlatness: ± 1.5 dBFrequency Range: 0.7–4.2GHz instantaneouslyGain: (at maximum setting) 43 dB minimum (Continuous Range) 10 dB minimumHarmonic Distortion (THD): Minus 20 dBc maximum at 15 wattsImpedance: 50 ohms, VSWR 2.0:1 maximumInput: 90-132, 180-264 VAC 50/60 Hz, single phase 210 watts maximumOutput: POWER OUTPUT @ 3dB COMPRESSION Nominal 25 watts Minimum 20 watts POWER OUTPUT @ 1dB COMPRESSION Nominal 22 watts Minimum 18 wattsRF Connector: RF Connector Type N female REMOTE INTERFACES: IEEE-488-24 pin female RS-232-9 pin Subminiature D (female) RS-232 (fiber optic)-Type ST USB 2.0-Type B Ethernet-RJ-45RF Input Voltage: 1.0 milliwatt maximum for rated outputStandards Met: CE Mark Testing -
-
CRAC Calibration Rail for Absorbing Clamps per CISPR 16
SKU: sku-2101
Weight: 110.3 lbs.Dimensions: 232.2in. x 31.5in.SHIPS IN 3-5 DAYS -
California Instruments 1501iX Programmable AC Power Source
SKU: sku-2100
Weight: per Chassis: Net: 61 lbs / 28 Kg, Shipping: 115 lbs / 52 KgCurrent rating: 120 ampsDimensions: Height: 7” (178 mm), Width: 19” (483 mm), Depth: 24” (610 mm) (depth includes rear panel connectors)Frequency Range: 16.00 - 81.91 Hz (0.01 Hz resolution) 81.0 – 819.1 Hz (0.1 Hz resolution) 820 – 1000 Hz (1 Hz resolution)¹Voltage ranges: 150-300 Volts -
AE Techron 7234 Industrial Power Amplifier/Battery Simulator
SKU: sku-2095
Weight: 41 lbs (18.6 kg), Shipping 51 lbs (23.2 kg)AC Power Adapter: Single phase, 120 VAC, 60 Hz, 20A service; (220-240 VAC, 50-60 Hz, 10A service model available)Frequency Range: DC—300 kHz (1 watt): +1 to -2.0 dBGain: Voltage Mode: 20 volts/volt Current Mode: 5 amperes/voltImpedance: 20k ohm differentialMax input power: ±10V, balanced or unbalancedOperating Temperature: 10°C to 50°C (50°F to 122°F), maximum output Power de-rated above 30°C (86°F).Output Impedance: 5.3 mΩ in series with 0.95 µHOutput voltage: ±150 VpIn Stock -
AE Techron 7224 Linear Power Amplifier
SKU: 6792
Test Standards: DO 160 Section 16, 18, 19, SAE J113, ISO 16750-2, MIL-STD-461Frequency Range: DC - 300 kHzGain: Voltage Mode: 20 volts/volt Current Mode: 5 amperes/voltImpedance: 20k ohm differentialMax input power: ±10V, balanced or unbalancedOutput Impedance: 5.3 mΩ in series with 0.95 µHOutput voltage: ±150 VpTypically In Stock -
Teseq CDN M532 5-Line/32 Amp RF Coupling/Decoupling Network
SKU: sku-2093
Weight: 6.5 kgCommon Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω; 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 ΩCurrent Rating: 32 Amps MaximumDecoupling of Common Mode Disturbance: Greater than 30 dBDimensions: 6.3 x 6.3 x 20 inches (16.0 cm x 16.0 cm x 50.0 cm)Insertion Loss: Greater than 0.1 dBMains & EUT Connections: 4 mm, safety (Optional IEC 320 16A)RF Connector: BNC, 50 ΩRF Input Voltage: Less than 30 VStandards Met: IEC 61000-4-6Voltage Division Factor: 10 dB +3 dB / -1 dB