Categories
Test Equipment, Systems & Solutions
-
-
Com-Power LI-220A 9 kHz - 30 MHz LISN for ISPR 16-1-2/ANSI C63.4
SKU: 10433
Weight: 20.5 lbs / 9.3 kgApplication/Test Type: Power line conducted emissions testsCurrent Rating: 20 Amperes AC, 14 Amperes DCDimensions: 16.75 x 15.5 x 7.5 inches / 42.5 x 39.3 x 19 cmFrequency Range: 9 KHz - 30 MHzInductors: 250 & 50 microhenry (air-core)Insertion Loss: 6 dB to 1 dBIsolation: 20 dB to 40 dBMains & EUT Connections: Superior Electric SUPERCON® shrouded socketsRF Connector: 50Ω N-type (female)Standards Met: CISPR 16-1-2 / ANSI C63.4Voltage Rating: 270 VAC (Line to Ground), 380 VDCIn stock -
EM Test EFT 500N5.8 Burst Generator up to 4.8kV, w/ Built in 3-Phase Coupler, IEC 61000-4-4
SKU: sku-293
Burst (EFT) 5/50 ns: Pulse conforms to IEC/EN 61000-4-4 -
Varian VZM6991K3 6 GHz - 18 GHz, 20 Watt RF Amplifier
SKU: 1469
Weight: 35 lbsDimensions: 19W x 19.25 x 3.5HFrequency range: 6.0 – 18.0 GHzGain: 35 dBHarmonics: -3 dBc at lower band edge decreasing to -15 dBc (typical) at upper band edge without optional harmonic filter. -20 dBc for P-Band modelsRated Power: 400 wattsVSWR: Input: 2.0:1 typical, Output: 2.0:1 typical Load: 1.3:1 max. for full spec compliance. 2.0:1 mas for no damageIn Stock -
Schwarzbeck FSE3D Isotropic 3-axial RX Antenna
SKU: FSE3D
Frequency Range: 30 MHz - 3.0 GHz (nominal)Coaxial Connector: N (male)Power Supply: 5 V DC < 100 mAPower Supply and Control Connector: Binder 99-0421-10-07 Series 712VSWR: typ. 1.3 - 1.7Inquire for Availability -
-
EM Test Dito ESD Simulator up to 16.5 kV for IEC/EN 61000-4-2
SKU: sku-645
Voltage Range: 500V - 16,500V +/-5%Electrostatic Discharge: Pulse conforms to IEC 61000-4-2 edition 2Holding Time: More than 5 secondsResolution: 100V stepsRise Time: 0.8ns +/- 25%Supply Voltage: More than 70,000 pulses @ 16.5kV; automatic power-off after 10 minutes if not operated LiFePo4 12.8V - 1000mAhTrigger: Automatic + Manual -
Pearson Model F-3 Calibration Fixture for MIL-STD-461 CS114, CS115, CS116
SKU: 4513
Frequency Range: 10 kHz to 400 MHzInner Conductor Diameter: 0.94 inches, 24 mmTest Standards: MIL-461 CS114, MIL-461 CS115Additional Test Standard: MIL-461 CS116In Stock -
Com-Power AHA-118 700 MHz - 18 GHz Active Horn Antenna
SKU: sku-357
Weight: 4 lbs. [1.8 kg]Antenna Factor (1 Meter): -13.1 to 11.3 (average: -0.4) [dB(m-1)]Applications: EMC Precompliance Testing, Radiated EmissionsConnector: Precision N-type (female)Dimensions: 5.6” x 9.5” x 10.2”[14.2 x 24.1 x 25.9 cm]Frequency Range: 1 GHz to 18 GHz (useable from 700 MHz)Gain: Preamplifier Gain: 40 dB (±2.5 dB) Active Isotropic Gain: 43.2 to 53.6 (average: 48.6) dBiImpedance: 50 OhmsMaximum Continuous Power: 300 WattsVSWR: 1.58 to 3.32 (average: 2.23) :1Rentals Ship Today -
Com-Power LI-550A Line Impedance Stabilization Network (LISN)
SKU: 10114
Weight: 14 lbs. / 6.3 kgApplication/Test Type: Power line conducted emissions testsCurrent Rating: 50 Amps (AC), 35 Amps (DC)Dimensions: 13 x 7 x 7 inches / 33 x 17.7 x 17.7 cmFrequency Range: 100 kHz to 108 MHzInductors: 5 µH (air-core)Insertion Loss: 1.5 dB (150 kHz to 30 MHz)Isolation: 20 - 40 dB (100 kHz to 3 MHz) 40 dB ( 3 MHz to 30 MHz)Mains & EUT Connections: Superior Electric SUPERCON® shrouded socketsRF Connector: 50Ω N-type (female)Standards Met: CISPR 25 / CISPR 16-1-2Voltage Rating: 270 VAC (Line to Ground), 380 VDCInquire for Lead Time -
Inquire for Availability -
Com-Power LI-150A 150 kHz - 30 MHz LISN, 50 Amps, 50 uH for CISPR 16-1-2/ANSI C63.4
SKU: 11113
Weight: 25 lbs. / 11.3 kgApplication/Test Type: Power line conducted emissions testsCurrent Rating: 50 Amps (AC), 35 Amps (DC)Dimensions: 13 x 7 x 7 inches / 33 x 17.7 x 17.7 cmFrequency Range: 150 kHz to 30 MHzInductors: 5 µH (air-core)Insertion Loss: 0.5 dB (150 kHz to 30 MHz)Isolation: 40 dB (150 kHz to 30 MHz)Mains & EUT Connections: Superior Electric SUPERCON® shrouded socketsRF Connector: 50Ω N-type (female)Standards Met: CISPR 16-1-2 / ANSI C63.4Voltage Rating: 270 VAC (Line to Ground), 380 VDC$295.00Inquire for Availability