Categories
Test Equipment, Systems & Solutions
-
-
Com-Power ANK-910L Antenna Kit 9 kHz to 1 GHz
SKU: 10381
Weight: 70 lbs / 31.8 KgDimensions: 27 x 27 x 12 Inches 68.5 x 68.5 x 30.5 cmFrequency Range: 9 kHz to 1 GHzInquire for Availability -
Haefely PSURGE 10/700us Telecom Impulse Test System
SKU: sku-248
Polarity: Positive and NegativeTelecom Surge: As per FCC part 68, Pulse B, IEC 61000-4-5, ITU and ETSI recommendationsTest Voltage: 0.20 – 7.4kV ±10%In Stock -
Schwarzbeck NSLK 8128 Line Impedance Stabilization Network
SKU: 12230
Frequency Ranges: 9 kHz - 30 MHzMax. Voltage: 250 V AC (50 Hz/ 60 Hz); 400 V DCPre-Filter Choke: 250 µHTest Standards: CISPR 16-1-2Inquire for Availability -
Com-Power ISN-T2 Impendace Stabilization Network 150 kHz to 30 MHz
SKU: sku-394
Weight: 2 lbs (0.91 kg)Current Rating: 800 mA (per line), 1.6 Amps (per pair)Dimensions: 10.8” x 4.5” x 3.8” (275 mm x 115 mm x 96 mm)Frequency Range: 150 kHz to 30 MHzIsolation: 150 kHz to 1.5 MHz: 35 dB to 55 dB (increasing linearly with the log of freq.) 1.5 MHz to 30 MHz: 55 dBMains & EUT Connections: D-sub 25 pin female connectorsRF Connector: 50Ω N-type (female)Standards Met: EN 55022 (CISPR 22), CISPR 16-1-2Voltage Rating: 50 VDC / 32 VAC (line to ground @ 50/60 Hz) -
Teseq NSG 3150 Combination Wave Surge Generator for IEC/EN 61000-4-5 up to 15 kV
SKU: 10795
Weight: Approx. 40 kg (88 lbs)Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5Coupling: IEC/externalDimensions: 449 (17.7”) x 328 (12.9”; 7 HU) x 565 mm (22.2”)Display Interface: 7“ touch-screenImpedance: 2/12 ΩPhase synchronization: asynchronous, synchronous 0 to 359º (in 1º steps)Polarity: pos / neg / alternatePulse current (short circuit): ±250 A to 7.5 kAPulse repetition: 20* .... 600 s (in 1 sec steps) 1 .... 10 min.Pulse voltage (open circuit): ±500 V to 15 kV (in 1 V steps)Supply Voltage: 85 to 265 VAC, 50/60 HzTest duration: 1 to 9999 pulses, continuousEquipment Group: Combination Wave GeneratorsTest Setup Overview: Surge Immunity Test, Setup, Equipment -
Teseq CDN 3063-S100 Automated Surge CDN Coupler - 3 Phase, 100 Amp, 480 Volts
SKU: sku-219
Application/Test Type: Automated Surge Immunity TestingCurrent Rating: 3 x 100 Amp continuous (peak 3 x 150 Amp for 30 min.)Mains & EUT Connections: HV-surge pulse input from generator (Fischer connector); Connector for EUT supply input (Screw terminals Phoenix); Connector for EUT supply output (Screw terminals)Standards Met: IEC / EN 61000-4-5:2005, ANSI C62.45, IEC / EN 61000-4-12:2006 and ANSI C62.41Voltage Rating: 480 VAC rms Line to LineInquire for Availability -
Teseq INA 6502 Automatic Step Transformer for IEC 61000-4-11
SKU: 3955
Test Standards: IEC/EN 61000-4-11Compatible Generators: Teseq NSG 3060, Teseq NSG 3040Applications: Conducted Immunity$549.00In stock -
Schwarzbeck VULP 9118 H Log Periodic Antenna
SKU: sku-1829
Frequency Range: 30 MHz - 1.3 GHzIsotropic Gain: 6.2 dBi + / - 1.2 dBAntenna Factor: -6 - 31 dB/mMax. Input Power: 2000 W (30 MHz), 300 W (1 GHz)Cross Polarisation: >20 dB (30 MHz...1 GHz)Inquire for Availability -
Amplifier Research AT3000 E Field Generator
SKU: sku-1731
Applications: Radiated SusceptibilityBuilt in Load: NoFrequency Range: 10 kHz - 30 MHzMax Radiated Field Strength: 135 V/m -
-
Amplifier Research MT06002 Multi-Tone RF Radiated & Conducted Immunity System
SKU: 11384
Applications: EMC RF/Radiated Susceptibility Testing