Categories
Test Equipment, Systems & Solutions
-
TTi PSA6005 Handheld Spectrum Analyzer 6 GHz
SKU: 5290
Frequency Range: 10 MHz to 6 GHzPhase Noise (Typical): -83 dBc/Hz at 30 kHz offset, -97 dBc/Hz at 100 kHz offset, -114 dBc/Hz at 1 MHz offsetDisplay Range: 84 dB from reference levelFlatness: Better than ± 1 dB relative to 2000MHz over the the full operating frequency rangeDisplayed Average Noise Level: Better than – 120 dBm (-13 dBuV) average displayed noise floorRF Input Connector: Standard N Type$435.00In Stock -
Amplifier Research 100W1000B 1 MHz - 1 GHz
SKU: 8287
Frequency Range: 1 MHz - 1 GHzOutput Power: 100 WFlatness: ±2.0 dB maximum, 1.5 dB typical, ±0.8 dB with internal levelingGain: 50 dB minimum (at max setting)Input Impedance: 50 ohms, VSWR 2.0:1 maximumOutput Impedance: 50 ohms nominalTypically In Stock -
AE Techron DSR 100-25 4-Quadrant AC/DC Voltage Source
SKU: sku-2355
Test Standards: DO-160G Section 16, MIL STD 461, SAE J1113-11, ISO 16750-2, ISO 7637-2Frequency Range: DC to 300 kHzOutput Current: 25 Amps Continuous (50A Peak)RENTAL ONLY -
Tomco RF Amplifier BT01000-AlphaS .1 MHz - 30MHz
SKU: sku-2308
Max Frequency: 30 MHzMin Frequency: 100 kHzOutput Power: 800 Watts PulseApplications: Particle, Plasma, Magnetic, Radar, NMR, MRI, EPR, ESR,ENDOR and NQRAC Input Power: 110-240V/1PH/1kVAGain: 60dB -
EFP18G 3-Axis E-Field Probe 3 MHz - 18 GHz
SKU: 12189
Weight: 0.2 lb, 100 gDimensions: (LxD): 9.0x2.25 inch, 230x58 mmFrequency range: 3 MHz-18 GHzApplications: RF Interference Analysis and EMF SniffingConnector Type: SMA(f)$4,860.00In Stock -
SteppIR SYS3-EMC E-Field Generator 20 MHz - 300 MHz, 200 V/m
SKU: sku-2122
Connector: N-Type, femaleFrequency Range: 20 MHz to 330 MHzImpedance: 50 ohmMax Radiated Field Strength: 200 V/mStandards Met: MIL 461 -
-
In Stock -
Teseq CDN 3425 Burst/EFT Coupling Clamp
SKU: sku-1065
Application/Test Type: Electrical Fast Transients on Data Lines (EFT Burst)Compatible Impulse Generators: Any EFT/Burst Generators (custom HV cable may be required)Standards Met: IEC / EN 61000-4-4Inquire for Availability -
Amplifier Research (AR) FL7006 Electric Field Probe Kit, 100 kHz - 6 GHz
SKU: 57543
Application/Test Type: Monitoring Electric Field StrengthsField Strength Range: 0.5 to 800 V/m (0.01 V/m)Frequency Range: 100 kHz to 6 GHzStandards Met: IEC/EN 61000-4-3Interfaces: USB, IEEE-488 (GPIB), RS-232 (serial), Fiber-Optic SerialBattery Life: 60-80 hoursTypically In Stock -
Fischer Custom Communications FCC F-120-1 Bulk Current Injection Probe
SKU: 11268
Aperture: 40 mm (1.57 inches)Insertion Loss: Less than 16dB / 5MHz - 80MHzMaximum Continuous Power: 100 Watts (for 30 minutes)RF Connector: N-type (f)Fre: 10 kHz - 175 MHzStandards Met: IEC 61000-4-6Applications: Bulk Current Injection BCI Testing, RF Conducted Immunity Testing$295.00In Stock -
FCC CISPR 22 Impedance Stabilization Network (ISN) FCC-TLISN-T4-02
SKU: sku-267
Weight: 1.0 kg (2.2 pounds)Application/Test Type: Measuring conducted emissions on two balanced pair telecom ITE’s.Common Mode Impedance: 150 ± 20ΩCurrent Rating: 250 mA MaximumDecoupling of Common Mode Disturbance: 35 dB min. to 150 kHz; 55 dB min up to 30 MHzDimensions: 100 x 100 x 235 mmFrequency Range: 150 kHz to 30 MHzMains & EUT Connections: D-sub 25 femaleRF Connector: 50Ω BNC femaleVoltage Division Factor: 9.5 dB ±1 dBVoltage Rating: 63 VAC RMS, 100 VDCIn Stock