Test Equipment by EMC & Compliance Standards

Standards Categories

CE Mark Testing

FCC Part 15

International (IEC/EN)

Automotive EMC Standards

Telecom Testing

Standards by Product/Industry

Standards Test Equipment, Systems & Solutions

EM Test AutoWave for Generating and Recording Automotive Waveforms

SKU: sku-477

Weight: 6kg

Dimensions: 100mm x 380mm x 390mm

Frequency range: DC - 50kHz

General Data: Technical Details

Output: 2 channels; 2 additional output channels can be added as an option (ExtBoard)

Resolution: 16 Bit

Supply Voltage: AC: 90V - 250V, 47Hz - 63Hz

Voltage: 10V, unipolar or bipolar

VIEW PRODUCT Cart
Amplifier Research (AR) FL7018 Laser Powered E-Field Probe, 3 MHz - 18 GHz

SKU: sku-278

Weight: 150 g (5.3 oz)

Application/Test Type: Monitoring electric field strengths in GTEM's, Anechoic Chambers and other RF rooms for radiated immunity testing.

Battery: N/A

Communication: USB, IEEE-488 (GPIB), RS-232 (serial), Fiber-Optic Serial

Digital Filtering: N/A

Dimensions: 65 mm (2.55 in)

Dynamic Range: 1 to 1,000 Volts per Meter (Single Range)

Flatness: Frequency correction OFF: ±1.0 dB @ 10 MHz Frequency correction ON: typically 0.8 dB, 5 kHz–1 GHz 1.4 dB, 1 GHz–18 GHz

Frequency Range: 3 MHz to 18 GHz

Internal Data Memory: None

Measurement Mode: X-Y-Z and Composite

Operation Time: Laser Powered - Seemless

Overload: 1,600 V/m CW 16,000 V/m Peak

PC Software: Optional Software for setup, automation and monitoring available.

Recharging Time: N/A

Resolution: 0.01 V/m

RF Field Probes: E-Field

Sampling Rate: 20 msec/up to 50 samples per second, USB and GPIB only

Sensors: Three monopoles

Standards Met: IEC/EN 61000-4-3

Temperature Reading Resolution: None

VIEW PRODUCT Cart
Rent EM Test VDS 200N10 Automotive Battery Source and Voltage Drop Simulator, 60 V/10 A

SKU: sku-244

Common Mode Impedance: Pulses 4 and 2b (ISO 7637-2/ISO 16750-2)

VIEW PRODUCT Cart
Teseq JT 5550 Load Dump Generator

SKU: JT 5550

Inquire for Availability

VIEW PRODUCT Cart
Teseq NSG 5500-2 Automotive Immunity Expandable Test System up to Five Transient Modules

SKU: sku-160

Applications: Automotive Electrical Disturbances, EV EMC Testing

Standards Met: ISO 7637

Max EUT DC Voltage (w/ Built In CDN): 60 Volts

Max EUT DC Current (w/ Built In CDN): 30 Amps

Peak Inrush Current Capability: 300 Amps

Pre-Programmed Pulses: ISO 7637-2 (Pulse 1, 2a,3a/3b 6),SAE J1113, GM 3097, BMW, Volkswagen, PSA, Chrysler, DC 10614, Renault, FIAT, Mitsubishi, Honda, Ford ES-XW7T

VIEW PRODUCT Cart
AH Systems AK-18G Antenna Kit for FCC, MIL-STD, VDE and TEMPEST Testing up to 18 GHz

SKU: 7149

Applications: Radiated Immunity, Radiated Emissions

Standards Met: FCC, MIL-STD-461, VDE, TEMPEST Testing

Antenna Case Dimensions: 28" x 23" x 10"

Tripod Case Dimensions: 46" x 8" Diameter

Inquire for Availability

VIEW PRODUCT Cart
Com-Power LI-350 Line Impedance Stabilization Network

SKU: 10425

Weight: 6 lbs. / 2.7 kg

Application/Test Type: Power line conducted emissions tests

Current Rating: 50 Ampere AC, 35 Ampere DC

Dimensions: 15.4 x 7 x 6.6 inches / 39.1 x 17.7 x 16.7 cm

Frequency Range: 10 kHz to 400 MHz

Inductors: 5 µH (air-core)

Insertion Loss: 0.2 dB (150 kHz to 30 MHz)

Mains & EUT Connections: Superior Electric SUPERCON® shrouded sockets

RF Connector: 50Ω N-type (female)

Standards Met: RTCA DO-160 / MIL-STD 461F

Voltage Rating: 480 VAC (Line to Ground), 676 VDC

Inquire for Availability

VIEW PRODUCT Cart
EM Test OCS 500N6F Simulator for Fast/Slow Damped Oscillatory Waves and Ringwave

SKU: 10413

Burst duration: 50 ms ±20%, at 3 MHz 15 ms ±20%, at 10 MHz 5 ms ±20%, at 30 MHz

Damping Rate: Peak 5 to be more than 50% of peak 1 value Peak 10 to be less than 50% of peak 1 value

Oscillation Frequency: 3 MHz, 10 MHz and 30 MHz, ±10%

Source Impedance: 50 ohm ±20%

Voltage: Voltage (o.c.) at HV output 450 V - 4,400 V ±10%

Burst Duration: At least 2s

Damping Rate-2: Peak 5 to be more than 50% of peak 1 value Peak 10 to be less than 50% of peak 1 value

Fast Damped Oscillatory Waves: As Per EN/IEC 61000-4-18

Frequency: 100 kHz ± 10%

General Data: Technical Details

Impedance: 12ohm and 30ohm ± 20%

Oscillation Frequency-2: 100kHz and 1MHz ± 10%

Peak current: Max. 500A @ 12ohm or Max. 200A @ 30ohm internally;

Polarity-2: Positive, negative

Pulse repetition: 1 to 60 transients per minute

Repetition Rate: Max. 5,000 /s ±10%

Ringwave 0.5 μs/100 kHz: Pulse conforms to IEC/EN 61000-4-12 and ANSI (IEEE) C62.41

Source impedance: 200ohm ± 20%

Spike frequency: 100kHz ± 10%

Test Voltage: 250 V - 6,000 V ± 10%

Equipment Group: Ring Wave Generators/Simulators

Inquire

VIEW PRODUCT Cart
Teseq ISN S752 Impedance Stabilization Network for Coaxial Lines

SKU: sku-174

Weight: approx. 1.5 kg

Dimensions: (W x H x D): 100 mm x 100 mm x 240 mm

Frequency Range: 150 kHz to 230 MHz

Impedance: 150 Ω ±20 Ω

RF Input Voltage: 20 V

VIEW PRODUCT Cart
Teseq ITS 6006 Radiated Immunity Test System

SKU: 11290

Frequency Range: 80 MHz to 6 GHz

Input: External AM input: BNC socket, impedance more than 10 kΩ External PM input: BNC socket, TTL

Output: Generator outputs: 4x N sockets 50 Ω, 80 MHz to 6 GHz Interlock outputs: 4x BNC sockets External PM output: BNC socket, TTL, impedance more than 1.2 kΩ 10 MHz reference output: BNC socket, approx. 0 dBm/50 Ω

Reference frequency: 10 MHz

Applications: RF/Radiated Immunity & Susceptibility Testing

Test Standards: MIL-461 RS103, IEC/EN 61000-4-3, ISO 11452-2, DO-160 Section 20

Cost New:

Was:

Price Now:

$18,000.00

In Stock
Rent Com-Power ISN-T8 for One, Two, Four, Unshielded Balanced Pair, CAT-3, CAT-5

SKU: 30150

Weight: 1.4 lbs. (0.6 kg) [ISN + LCL Adapter + Connecting Adapter]

Current Rating: 800 mA (per line), 1.6 Amps (per pair)

Dimensions: see photo in images

Frequency Range: 150 kHz to 30 MHz

Isolation: 150 kHz to 1.5 MHz: 35 to 55 dB 1.5 MHz to 30 MHz: 55 dB

Mains & EUT Connections: D-sub 25 pin female connectors

RF Connector: 50Ω N-type (female)

Standards Met: CISPR 16-1-2, CISPR 22

Voltage Rating: 50 VDC / 32 VAC (line to ground @ 50/60 Hz)

Cost New:

Was:

Price Now:

$410.00 - $4,100.00

Typically in Stock

ORDERING OPTIONS
EM Test Automotive Transient Emission Set for ISO 7637-2

SKU: 30011

Applications: EV and Automotive

Test Standards: ISO 7637-2

Includes: AN 200N100 Artificial Network, BS 200N100.1 Electronic Switch, and BSM 200N40 Mechanical Switch (see specs in Overview)

Inquire for Availability

VIEW PRODUCT Cart