Name: EM Test LD 200 S19 Load Dump Generator
Brand: EM Test
SKU: AUTO-EM-LD200S19-002
Availability: InStock

EM Test LD 200 S19 Load Dump Generator

Condition:: Used
SKU:: AUTO-EM-LD200S19-002
Availability:: In Stock
Manufacturer:: EM Test

Designed For Automotive Load Dump Simulation
Simulates Transient Voltage Conditions
Ideal For Automotive EMC and Electrical Testing
Supports Repeatable And Controlled Test Conditions
Suitable For ECU And Power System Validation

No reviews yet Write a Review

Overview

The EM Test LD 200 S19 is usable for precompliance testing to ISO 16750-2, ISO 11498-2 and other automotive standards to determine a products vulnerability to electrical transients and events. This unit is pre-loaded with only Toyota testing protocols.

Specifications

Load Dump Test 1
Output Voltage	80 V ±2 V
Open Circuit	80 V ±2 V
Rise Time tr	<10 µs
Pulse Duration at t	52 µs ±5 µs
Output Resistor	2.5 Ω
Polarity	Positive
Repetition Time	1 Pulse Each 5 min
Test Time	10 min
Coupling	Superimposed to the battery supply line
Set-up	As per fig. 8 / 5.5.3

Load Dump Test 2 – Giant Pulse
Output Voltage	50 V ±2 V
Open Circuit	80 V ±2 V
Open Circuit	110 V ±2 V
Rise Time tr	<1 ms
Pulse Duration at t	188 ms ±4 ms
Output Resistor	2.5 Ω
Polarity	Positive
Repetition Time	1 Pulse Each Minute
Coupling	Superimposed to the battery supply line
Set-up	As per fig. 10 / 5.5.4

Load Dump Test 3
Output Voltage	High Repetitive Load Dump as per 5.5.5
Open Circuit	80 V ±2 V
Rise Time tr	<10 µs
Pulse Duration at t	52 µs ±5 µs
Output Resistor	2.5 Ω
Polarity	Positive
Repetition Time	1 Pulse Each 5 min
External DC Source	Available at Customer Site, Max 30 V Out
Positive Pole Surge	+30 V / 0 V / -1 V
Duration	300 ms
Repetition Time	1 Pulse Each Minute
Control	By LD 200 S19
Coupling	Superimposed to the battery supply line
Set-up	As per fig. 12 / 5.5.5

Trigger
Automatic	Automatic Pulse Release
Counter	1 - 1,000,000

Coupling
Battery Supply	Max. 60 V / 50 A With 100 A Inrush Current External DC Source or Battery is Requested
Superimposed	+ Line
Decoupled	By Diode Network

Test Routines
Standard Test Routines	Load Dump Test 1 as per Toyota TSC7001G Load Dump Test 2 as per Toyota TSC7001G Load Dump Test 3 as per Toyota TSC7001G

Service
Service	Service, Setup, Self Test

Interface
Serial Interface	RS 232, Baud Rate 1200 - 19200
Parallel Interface	IEEE 488, Address 1 - 30

Safety
Safety Circuit	Control Input (24 VDC)
Warning Lamp	Floating Output Contact

General Data
Dimensions	19" / 6HU, Approx. 18 kg
Supply Voltage	115 / 230 V +10 / -15%
Fuses	2 x 1AT