3ctest LISN F 16A Reference Impedance

The 3ctest LISN F 16A (Reference Impedance LISN) is designed in accordance with GB/T 17625.2 and is used for voltage fluctuation and flicker testing in three-phase power systems. It provides a stable and standardized impedance environment, ensuring accurate and repeatable measurement conditions during EMC testing.

With front and rear panel terminals, the LISN F 16A allows flexible connections depending on the test setup. The use of banana plug interfaces ensures safe, reliable, and convenient operation in both laboratory and compliance testing environments.

The EMC Shop customers use the 3ctest LISN F 16A to establish a controlled impedance network when performing voltage fluctuation and flicker testing on three-phase powered devices. In a typical setup, the LISN is connected between the power source and the device under test (DUT) to stabilize the supply and isolate unwanted noise from the measurement system.

Engineers rely on the LISN F 16A during compliance and pre-compliance testing to ensure that measurements are consistent and aligned with GB/T 17625.2 requirements. Its dual-side terminal configuration allows flexible integration into different lab setups, making it suitable for both fixed and mobile test environments.

In EMC labs, the LISN is often used together with measurement receivers and analyzers to monitor conducted emissions and power line disturbances. This setup helps users accurately evaluate device performance, identify interference sources, and ensure compliance with applicable standards.