(Showing 12 of 1974)
Show 12 24 36 48 96

Categories

EMC Test Equipment
EMC Test Equipment
Test Applications
Test Applications
Standards
Standards
Manufacturers
Manufacturers
Shielded Enclosures
Shielded Enclosures
RF Test Equipment
RF Test Equipment
Electronic Test Equipment
Electronic Test Equipment
Antenna Pattern Measurement Equipment
Antenna Pattern Measurement Equipment
Clearance
Clearance
Resources

Test Equipment, Systems & Solutions

  • Com-Power LI-3P-232 Three Phase LISN for CISPR / ANSI

    Com-Power LI-3P-232 Three Phase LISN for CISPR / ANSI

    SKU: sku-893

    Weight: 27.5 lbs.
    Application/Test Type: Power Line Conducted Emissions Tests
    Current rating: 32 Amperes
    Dimensions: 19.3” x 13.9” x 2.3″
    Frequency Range: 9 kHz – 30 MHz
    Inductors: 50 µH
    Insertion loss: less than 0.7 dB
    Isolation: more than 40 dB
    Mains & EUT Connections: Remote Interface Power Input Port 5.5/2.5 mm Power Jack
    RF Connector: RF Measurement Port 50Ω – N-Type (female)
    Standards Met: ANSI C63.4, CISPR 16-1-2
    VIEW PRODUCT Cart
  • Com-Power LI-150C Line Impedance Stabilization Network

    Com-Power LI-150C Line Impedance Stabilization Network

    SKU: sku-890

    Weight: 25 lbs. / 11.3 kg
    Application/Test Type: Power line conducted emissions tests
    Current Rating: 50 Amps (AC), 35 Amps (DC)
    Dimensions: 13 x 7 x 7 inches / 33 x 17.7 x 17.7 cm
    Frequency Range: 150 kHz to 30 MHz
    Inductors: 5 µH (air-core)
    Insertion Loss: 0.5 dB (150 kHz to 30 MHz)
    Isolation: 40 dB (150 kHz to 30 MHz)
    Mains & EUT Connections: Superior Electric SUPERCON® shrouded sockets
    RF Connector: 50Ω N-type (female)
    Standards Met: CISPR 16-1-2 / ANSI C63.4
    Voltage Rating: 270 VAC (Line to Ground), 380 VDC
    VIEW PRODUCT Cart
  • Com-Power LIN-120C Line Impedance Stabilization Network

    Com-Power LIN-120C Line Impedance Stabilization Network

    SKU: sku-889

    Weight: 10 lbs (4.5 kg)
    Application/Test Type: Power line conducted emissions tests
    Current Rating: 20 Amps AC (rms) , 14 Amps DC
    Dimensions: 6.6” x 14.3” x 13” (16.8 x 36.3 x 33 cm)
    Frequency Range: 150 kHz to 30 MHz
    Inductors: 50 µH (air-core)
    Insertion Loss: 0.5 dB (150 kHz to 30 MHz)
    Isolation: 40 dB (150 kHz to 30 MHz)
    Mains & EUT Connections: IEC 60320 @Mains and NEMA 5-15R @EUT
    RF Connector: 50Ω N-type (female)
    Standards Met: CISPR 16-1-2, ANSI C63.4
    Voltage Rating: 270 VAC (Line to Ground), 380 VDC
    VIEW PRODUCT Cart
  • Narda Broadband E-Field Meter Kit, 100 kHz - 50 GHz

    Narda Broadband E-Field Meter Kit, 100 kHz - 50 GHz

    SKU: sku-885

    Weight: 10.6 oz.
    Application/Test Type: Monitoring electric field strengths in GTEM's, Anechoic Chambers and other RF rooms for radiated immunity testing.
    Battery: NiMH rechargeable batteries 4 x AA size (Mignon), 2500 mAh
    Dimensions: 1.5 x 2.0 x 8 inches
    Frequency Range: 100 kHz - 60 GHz
    Operation Time: 20 hours (backlight off, no GPS) 12 hours (permanent backlight, no GPS) 10 hours (GPS receiver connected, no backlight)
    Recharging Time: 2 hours
    Standards Met: IEC 61000-4-3
    $595.00 - $2,495.00
    Typically In Stock
    ORDERING OPTIONS
  • Com-Power LI-125C 150 kHz to 30 MHz Line Impedance Stabilization Network Pair

    Com-Power LI-125C 150 kHz to 30 MHz Line Impedance Stabilization Network Pair

    SKU: sku-881

    Weight: 25 lbs. / 11.3 kg
    Application/Test Type: Power line conducted emissions tests
    Current Rating: 25 Amps (AC), 17 Amps (DC)
    Dimensions: 13 x 7 x 7 inches / 33 x 17.7 x 17.7 cm
    Frequency Range: 150 kHz to 30 MHz
    Inductors: 50 µH (air-core)
    Insertion Loss: 0.5 dB (150 kHz to 30 MHz)
    Isolation: 40 dB (150 kHz to 30 MHz)
    Mains & EUT Connections: Superior Electric SUPERCON® shrouded sockets
    RF Connector: 50Ω N-type (female)
    Standards Met: CISPR 16-1-2 / ANSI C63.4
    Voltage Rating: 270 VAC (Line to Ground), 380 VDC
    VIEW PRODUCT Cart