Categories
Test Equipment, Systems & Solutions
-
Amplifier Research 100A250A RF Amplifier for BCI Testing
SKU: sku-1306-1
Max Frequency: 250 MHzMin Frequency: 10 kHzOutput Power: 100 WattsApplications: RF Conducted Immunity, BCI Testing, MilitaryStandards: MIL 461 CS 114, IEC 61000-4-6Gain: 50 dBAC Input Power: 120V/1PHTypically In Stock -
Amplifier Research 2500A225B High Power Low Frequency RF Amplifier
SKU: sku-1314-1
Max Frequency: 225 MHzMin Frequency: 10 kHzOutput Power: 2500 WattsApplications: RF Conducted Immunity, MedicalStandards: IEC 61000-4-6, MIL-STD 461 CS114AC Input Power: 380-415V/3PH/8.5kVAGain: 64 dBConnector Type: 7/16 DINTypically In Stock -
Amplifier Research 350S1G6 0.7-6 GHz High Power Amplifier
SKU: sku-2203-1
Max Frequency: 6 GHzMin Frequency: 700 MHzOutput Power: 350 WattsApplications: Radiated Immunity, Automotive, MedicalStandards: IEC 61000-4-3Gain: 57 dBAC Input Power: 230V/1PH/3.8kVARF Connector: 7/16 DINInquire for Availability -
Rohde & Schwarz NRP33SN PoE RF Power Sensor
Frequency Range: 10 MHz - 33 GHzLevel: -70 dBm to +23 dBmConnector Type: 3.5 mm (m)Warranty: 100 DaysCalibration: NIST (ISO 17025 Available)$7,500.001 Unit -
NH Research 9200 Battery Cell, Pack and Module Test System
SKU: 6698
DC Voltage Output: 40 VoltsDC Current Output: 2,400 AmpsCharge/Discharge Modes: Constant-Voltage(CV), Current(CC), Power(CP), Resistance(CR)In Stock -
ETS-Lindgren 5240 Tabletop RF Shielded Test Boxes
Construction: 24 oz Copper Clad ExteriorRF Seal Type: Double Electrical ContactEase of Operation: In a Compact, Portable FormatCustom Sizes: Available Upon Request -
-
E&I / ENI 1020L 10 kHz to 5 MHz 200 Watt RF Power Amplifier
Frequency range: 10 KHz – 5 MHzClass of Operation: Class ABRated Power Output: 200 WattsSaturated Power Output: 300 WattsPower Gain: 53 dB nominalGain Flatness: +/- 1.5 dBInput Power for Rated Output: 1.0 mW or 0 dBmInput Impedance: 50 ΩOutput Impedance: 50 ΩRuggedness: Any load VSWR, any phase from open to Short circuit without damageFront Panel Accuracy: +/- 3% to 2 MHzDrive Source Requirements: Any signal Generator, function Generator or oscillator capable of up to 0.7 Vpp into 50 Ω -
Anritsu MG3692C Microwave Signal Generator OPT: 2A, 5, 6, 16, 28A
SKU: ANRI-MG3692C-CL
Frequency range: 8 MHz to 20 GHzFrequency resolution: 0.01 HzOptions: 2A, 5, 6, 16, 28ACondition (Scale 5-10): 6 (Chassis Damage)Warranty: 120 Days (Fresh Calibration)Test Standards: DO-160 Section 20Test Standards: , MIL461 RS103Applications: Radiated Susceptibility Testing$1,495.001 LEFT -
ETS-Lindgren HI-6100 EMF Field Monitor
Power: 90-260 VAC, 50/60 Hz, 1AOperating Temperature Range: 10°C - 40°C(50°F - 104°F)Outputs: USB, IEEE-488, RS-232Depth: 381 mmHeight: 133 mmInputs: 4 Model 6105 or 6005 (any mix)Weight: 3.2 kgWidth: 483 mm -
Com-Power CGO-5100A Comb Generator 1 GHz - 18 GHz
Frequency Range: 1 GHz - 18 GHzFrequency Step Size: 100 MHzAmplitude Variation: ± 2 dBBatteries: 3.6 V NimHDimensions: 8” circular x 1” (19.2 cm circular x 2.4 cm)Weight: 1 lb. (0.45 kg) -
NH Research 4760 Programmable DC Electronic Load - 600 Volts
SKU: NHR-4760
Max Voltage Handling: 600 VoltsMax Current Handling: 50 Amps (Per Chassis)Applications: Battery testing, Automotive/EV testing$875.00RENTAL ONLY